Loading...

Pontiac Safari Exhaust Brackets

Pontiac Safari Exhaust brackets

Starting at $7.95, AutoBuffy stocks 1 exhaust brackets from Walker for the Pontiac Safari. An exhaust bracket (also called an exhaust hanger or mount) clamps the exhaust system to the vehicle's undercarriage, absorbing vibration and keeping pipes properly aligned. When one fails, the exhaust sags, rattles, and can contact the floor or suspension—causing heat damage and costly secondary repairs.

Signs your Pontiac Safari needs a new exhaust bracket

  • Loud metallic rattling or clunking from underneath the vehicle, especially at idle or over bumps
  • Visible sagging or misaligned exhaust pipe when viewed from behind the vehicle
  • Exhaust pipe or muffler scraping the ground or contacting suspension components
  • Rubber isolator torn, cracked, or completely missing from the mounting point
  • Excessive exhaust vibration felt through the floor, seats, or steering wheel
  • Broken or bent metal bracket visible on the undercarriage, sometimes with weld failure at the chassis attachment point

Which exhaust bracket should you buy for your Pontiac Safari?

The right exhaust bracket depends on its position in the exhaust system, the type of isolator it uses, and whether you need OE-style fitment or a heavy-duty upgrade. Brackets near the manifold face higher heat and may require a different material than those at the muffler or tailpipe. Check which mounting position has failed before ordering, since front, mid-pipe, and rear hangers are not interchangeable.

OEM-Replacement Bracket
Best for
Drivers who want a direct fit with no modifications
What you get
Exact geometry, correct isolator durometer, easiest bolt-on installation
Heavy-Duty Steel Bracket
Best for
High-mileage vehicles, off-road use, or areas with severe road salt corrosion
What you get
Thicker gauge steel or stainless construction, longer service life in harsh conditions
Rubber Isolator / Hanger Only
Best for
Bracket is intact but the rubber mount has torn or rotted away
What you get
Lower-cost fix that replaces just the isolator without removing the welded bracket
Universal Adjustable Bracket
Best for
Custom exhausts, modified systems, or when OE part is discontinued
What you get
Slotted mounting holes allow repositioning; requires trimming or drilling for final fit

Exhaust brackets brands we stock for your Pontiac Safari

Walker
1 option · from $7.95

Replacing exhaust brackets on a Pontiac Safari

Easy⏱ 30–90 minutesFloor jack and jack stands or rampsRatchet and socket setPenetrating oil (for seized fasteners)Pry bar or flathead screwdriver (to unseat rubber isolators)Heat-resistant gloves

Allow the exhaust to cool completely before starting, then safely raise and support the vehicle. Apply penetrating oil to any rusted fasteners and allow it to soak before loosening. For rubber isolators, a pry bar or soapy water helps unseat the old mount and seat the new one without tearing it; for bolted brackets, remove the fasteners, swap the bracket, and snug all hardware evenly before final tightening.

Frequently asked questions

How much does it cost to replace exhaust brackets on a Pontiac Safari?
Parts start at $7.95 on AutoBuffy. The bracket itself is inexpensive, but total cost depends on how many mounting points have failed and whether the bracket is welded or bolted. A bolted replacement is a straightforward DIY job; a welded bracket requires professional welding, which adds labor cost.
Can I drive my Pontiac Safari with a broken exhaust bracket?
Driving with a broken exhaust bracket is not recommended beyond a short-term basis. A sagging exhaust can contact fuel lines, brake lines, or suspension parts, creating a fire or safety hazard. Exhaust gases can also enter the cabin through gaps caused by misalignment. Fix a failed bracket as soon as possible.
How long do exhaust brackets last on a Pontiac Safari?
The metal bracket itself can last the life of the vehicle, but the rubber isolator typically wears out sooner—often within several years depending on climate, road salt exposure, and heat cycling. Vehicles in northern states or areas with heavy winter road treatment tend to see earlier bracket and isolator failure due to corrosion.
Do I need to replace the entire bracket or just the rubber hanger?
If the metal bracket is intact and not cracked or corroded through, replacing only the rubber isolator is usually sufficient and significantly cheaper. Inspect the steel portion carefully for rust-through or weld failure. If the bracket itself is broken, bent, or separated from the chassis, the full bracket assembly needs replacement.
How do I find the right exhaust bracket for my Pontiac Safari?
Match by position—front pipe, mid-pipe, resonator, or muffler hanger—because each location has a different bracket shape and isolator design. Use your Pontiac Safari's year, make, model, and engine size when searching. AutoBuffy's 1 options cover 1987–1989 and are filtered by vehicle fitment to eliminate guesswork.
Is replacing an exhaust bracket a DIY job on a Pontiac Safari?
Most rubber isolator and bolted bracket replacements are DIY-friendly with basic hand tools and a jack stand. Seized fasteners on high-mileage or salt-belt vehicles are the most common complication and may require penetrating oil or heat. Welded brackets require a welder or professional shop to reattach properly.

Shop exhaust brackets by year for the Pontiac Safari

198919881987

More parts for your Pontiac Safari

Shock Absorber SetDistributor CapShock AbsorberDoor Lock SwitchEngine Cooling Fan Motor RelayEngine Timing Camshaft SprocketHeadlight Dimmer Switch ConnectorExhaust System Hanger

Exhaust brackets for other Pontiac models

Pontiac GrandvillePontiac J2000 SunbirdPontiac LaurentianPontiac Trans SportPontiac PhoenixPontiac Grand LeMans