Loading...
Starting at $27.95, AutoBuffy stocks 1 ABS modulator sensor connectors from Standard Ignition. This connector links the ABS wheel speed sensor to the vehicle's modulator and control module, carrying the electrical signal that triggers anti-lock braking. A failed connector interrupts that signal, disabling ABS and triggering warning lights that can affect traction and stability control on your Pontiac Torrent.
The main decision is whether to buy an OE-equivalent pigtail connector, a repair harness kit, or a complete connector assembly with lead wires already attached. Fit is critical — connectors are keyed by pin count, terminal gender, and locking style, so confirm compatibility for your Pontiac Torrent's specific year range within 2006–2009 before ordering.
| Option | Best for | What you get |
|---|---|---|
| OE-Equivalent Pigtail Connector | Direct plug-and-play replacement with no splicing | Pre-terminated connector body that matches the factory plug exactly; quickest install |
| Repair Harness with Lead Wires | Damaged wiring within a few inches of the original connector | Connector plus 6–12 inches of pre-stripped wire for splicing into the existing harness |
| Modulator-Side Connector | Fault at the ABS modulator/pump assembly rather than the wheel sensor end | Connector sized and keyed for the multi-pin modulator port; restores signal at the control unit |
| Weatherproof Sealed Connector Kit | High-exposure locations such as front wheel wells prone to road spray and salt | Sealed housing with moisture-resistant terminals to prevent repeat corrosion failures |
Locate the connector at the wheel speed sensor or along the harness running to the ABS modulator, depress the locking tab, and unplug it. If installing a pigtail, plug the new connector straight in; if using a repair harness, cut back the damaged section, strip the wires, and splice using heat-shrink crimp connectors or soldered joints. Apply dielectric grease to the terminals before seating the connector, then clear any stored fault codes and confirm the ABS warning light goes off.