Loading...

Porsche 356A Starter Cables

Porsche 356A Starter cables

Starting at $7.95, AutoBuffy carries 1 starter cables from URO that fit the Porsche 356A. The starter cable carries high-amperage current from the battery to the starter motor, triggering engine cranking. When it corrodes, frays, or loses continuity, the engine won't crank — leaving you stranded with no warning.

Signs your Porsche 356A needs a new starter cable

  • Engine produces a single loud click or no sound at all when the key is turned, even with a fully charged battery
  • Intermittent no-crank condition — the engine starts fine sometimes and refuses to crank other times with no pattern
  • Visible corrosion, green-white buildup, or fraying at either terminal end of the cable
  • Cable housing is cracked, melted, or shows heat discoloration along its length
  • Voltage drop test shows more than 0.5V loss across the cable under cranking load
  • Starter motor was just replaced but the engine still cranks sluggishly or not at all

Which starter cable should you buy for your Porsche 356A?

The two main decisions are cable gauge and construction quality. Starter cables must carry hundreds of amps for several seconds at a time, so undersized or low-strand-count wire causes voltage drop that weakens cranking. Match the original cable's gauge, length, and terminal configuration before ordering.

OEM-spec replacement
Best for
Owners who want an exact fit with no modifications
What you get
Correct gauge, length, and factory terminal ends for the Porsche 356A — bolt-on installation with no splicing
Heavy-duty upgraded cable
Best for
High-compression engines, cold climates, or frequent short-trip use
What you get
Higher strand count and thicker insulation for lower resistance and longer service life under demanding conditions
Universal cable with lugs
Best for
DIYers comfortable with crimping or soldering custom lengths
What you get
Cut-to-length wire sold by the foot with separate terminal lugs — lowest cost but requires proper crimping tools
Pre-terminated braided cable
Best for
Performance builds or engines with relocated batteries
What you get
Flexible braided copper construction handles vibration better than solid-strand wire and suits tight or non-stock routing

Starter cables brands we stock for your Porsche 356A

URO
1 option · from $7.95

Replacing the starter cable on a Porsche 356A

Easy⏱ 30–60 minutesCombination wrench set or socket setWire brush or terminal cleaning toolBattery terminal puller (optional but helpful)Dielectric greaseSafety glasses

Always disconnect the negative battery terminal first before touching any starter cable to eliminate the risk of a short circuit. Route the new cable along the same path as the original, keeping it clear of exhaust components and moving parts, and secure it with any original clamps or brackets. Reconnect the negative terminal last and verify a firm, corrosion-free connection at both ends before attempting to start the engine.

Frequently asked questions

How much does it cost to replace starter cables on a Porsche 356A?
Parts start at $7.95 at AutoBuffy. A shop will typically add one to two hours of labor on top of the part cost. DIY replacement is straightforward with basic hand tools, so buying the cable yourself and installing it at home is the most cost-effective approach for most owners.
Can a bad starter cable cause a no-start that looks like a dead battery?
Yes, and it is one of the most common misdiagnoses. A corroded or failing starter cable creates resistance that starves the starter of amperage, producing the same single-click or silence you get from a dead battery. Always perform a voltage drop test across the cable before condemning the battery or starter.
How long do starter cables last on a Porsche 356A?
A quality starter cable typically lasts many years under normal conditions, but lifespan shortens significantly in climates with road salt, high heat under the hood, or frequent cold-weather cranking. Inspect the cable at every battery service. Corrosion at the terminals is the earliest warning sign and should prompt replacement.
Is there more than one starter cable on a Porsche 356A?
Most vehicles have two heavy cables involved in starting: the positive cable running from the battery to the starter, and the negative ground cable running from the battery to the engine block or chassis. Both carry cranking current and both should be inspected together. Replacing only one while the other is degraded can leave the problem unresolved.
Can I clean a corroded starter cable instead of replacing it?
Surface corrosion at a terminal can sometimes be cleaned with a wire brush and baking-soda solution, restoring a good connection temporarily. However, if corrosion has wicked under the insulation, if the copper strands are green throughout, or if the cable is cracked or heat-damaged, cleaning is not sufficient and replacement is the correct fix.
What gauge starter cable does the Porsche 356A need?
Gauge is determined by the original equipment specification for your engine's starter draw. Matching or slightly exceeding the factory gauge ensures adequate current flow without voltage drop. Check the diameter of your existing cable or consult the Porsche 356A service manual. Using an undersized universal cable is a common mistake that causes slow cranking and premature starter failure.

Shop starter cables by year for the Porsche 356A

19591958195719561955

More parts for your Porsche 356A

Brake Hydraulic HoseClutch Cable ClevisTie Rod EndEngine Oil Pressure SwitchDistributor CapDoor MirrorEngine Air FilterCarburetor Accelerator Bell Crank Bushing

Starter cables for other Porsche models

Porsche 911Porsche 968Porsche 924Porsche 912Porsche 356CPorsche 356B