Loading...

Porsche 356C HVAC Heater Control Knobs

Porsche 356C Hvac heater control knobs

Starting at $14.95, AutoBuffy stocks 1 HVAC heater control knobs from URO for the Porsche 356C. The heater control knob attaches to the climate control panel and physically adjusts temperature, fan speed, or airflow mode. When it cracks, strips, or falls off, you lose direct control over cabin comfort and defrost functions.

Signs your Porsche 356C needs a new heater control knob

  • The knob spins freely without engaging the underlying shaft, so temperature or fan settings no longer change
  • The knob has cracked, snapped, or broken off entirely, leaving only a bare shaft exposed
  • The set screw or internal clip has stripped, causing the knob to pull off whenever you turn it
  • The knob wobbles noticeably on the shaft, making precise fan speed or temperature selection difficult
  • The printed position markings have worn away, making it impossible to tell which setting is selected
  • The knob is physically present but feels loose or misaligned, so it no longer points accurately to the panel's labeled positions

Which heater control knob should you buy for your Porsche 356C?

The most important buying decision is fit: heater control knobs are specific to the climate control panel design, so shaft type (D-shaft, round, or splined) and knob diameter must match exactly. Beyond fit, you are choosing between OEM-equivalent quality and budget replacements. Consider whether you need one knob (temperature, fan, or mode) or a full set, since panel wear usually affects all knobs around the same time.

OEM Replacement
Best for
Owners who want factory fit, finish, and engraved markings
What you get
Exact color match, correct shaft bore, and printed or molded position indicators that align with the panel
Aftermarket Direct-Fit
Best for
Budget-conscious owners who still want a plug-and-play replacement
What you get
Comparable dimensions and shaft fit at a lower cost; minor cosmetic differences possible
Full Knob Set (Temperature + Fan + Mode)
Best for
Vehicles where all three knobs show equal wear or fading
What you get
Consistent look across the control panel; often a better value than buying knobs individually
Universal Fit with Adapter
Best for
Situations where an exact OEM-match is discontinued or unavailable
What you get
Adjustable shaft insert accommodates multiple shaft profiles; requires careful sizing verification before purchase

Hvac heater control knobs brands we stock for your Porsche 356C

URO
1 option · from $14.95

Replacing the heater control knob on a Porsche 356C

Easy⏱ 15–30 minutesSmall flathead screwdriverHex key (Allen wrench) setTrim pry tool (optional, for panel illumination ring removal)Needle-nose pliers (if clip is recessed)

Most heater control knobs on the Porsche 356C pull straight off a D-shaft with firm hand pressure, or release once a small set screw on the knob's collar is loosened with a hex key. Align the flat side of the replacement knob's bore with the flat side of the shaft, press or slide it on until it seats, and tighten the set screw if present. No special calibration is needed—simply verify the knob's indicator points to the correct panel marking before considering the job complete.

Frequently asked questions

How much does it cost to replace heater control knobs on a Porsche 356C?
Parts start at $14.95 on AutoBuffy. A single replacement knob is typically the only cost since installation is a tool-free snap-on or set-screw procedure most owners complete in minutes. If all three climate knobs are worn, buying a matched set at once is usually the most economical approach.
How do I know which heater control knob fits my Porsche 356C?
Match the shaft type—D-shaped, round, or splined—by pulling the old knob off and inspecting the exposed shaft. Also measure the knob's outer diameter and note the panel's color. AutoBuffy's fitment filter narrows results to parts confirmed for your Porsche 356C's specific trim and climate control panel configuration.
Can a broken heater control knob affect defrost on my Porsche 356C?
Yes. On many Porsche 356C climate panels, the mode knob directly selects front or rear defrost positions. If that knob is stripped or missing, you may be unable to rotate the shaft to the defrost setting, leaving you with fogged or iced windows and a safety concern in cold or wet weather.
Is replacing a heater control knob on a Porsche 356C a DIY job?
In most cases, yes. The majority of heater control knobs either press directly onto the shaft or are secured by a small set screw accessible with a flathead or hex key. No dashboard disassembly is typically required. The job usually takes under fifteen minutes and needs only basic hand tools.
Why did my Porsche 356C's heater control knob break in the first place?
Climate control knobs endure thousands of rotations over a vehicle's life and are made from plastic that becomes brittle with age and UV exposure from sunlight through the windshield. Forcing a stiff knob, liquid spills that swell or degrade the plastic, and general fatigue of the internal clip or set-screw bore are the most common failure causes.
Do I need to replace all three climate knobs at once on my Porsche 356C?
You are not required to, but it is worth considering. If one knob has failed due to age or UV degradation, the others are made from the same material and are the same age. Replacing all three at once ensures a color-matched, consistent appearance and avoids a second repair visit in the near term.

Shop hvac heater control knobs by year for the Porsche 356C

1965

More parts for your Porsche 356C

Ignition CoilBrake Rotor SetBrake Master CylinderBrake Light SwitchManual Transmission Shift Shaft Coupling Rubber BufferBrake Master Cylinder Reservoir GrommetSunroof SealTie Rod End

Hvac heater control knobs for other Porsche models

Porsche 968Porsche 944Porsche 911Porsche 912