Loading...

Porsche 912 Seat Belt Anchor Plate Covers

Porsche 912 Seat belt anchor plate covers

Starting at $18.95, AutoBuffy stocks 3 seat belt anchor plate covers from URO. This small plastic or metal trim piece snaps over the seat belt's floor or pillar anchor bolt, concealing the hardware and preventing fraying where the belt webbing meets the mounting point. A cracked or missing cover exposes sharp edges that can cut belt webbing, creating a genuine safety hazard.

Signs your Porsche 912 needs a new seat belt anchor plate cover

  • Visible crack, chip, or complete break in the plastic trim piece at the belt's anchor point
  • Cover has gone missing entirely, leaving the anchor bolt and webbing edge fully exposed
  • Sharp plastic edges on the existing cover are visibly fraying or cutting into the seat belt webbing
  • Cover rattles or shifts when the seat belt is buckled or the vehicle moves over bumps
  • Discoloration, warping, or melting around the anchor area from sun exposure or heat
  • Cover no longer clips securely to the floor rail or pillar bracket and falls off repeatedly

Which seat belt anchor plate cover should you buy for your Porsche 912?

The most important buying decision is fitment: anchor plate covers are position-specific and often vehicle-specific, so a front-seat driver-side cover is not interchangeable with a rear-seat or second-row unit. Beyond position, you will choose between OEM-equivalent parts that match original finish and clip design, and aftermarket options that may vary slightly in color or plastic grade.

OEM-Equivalent (front, driver side)
Best for
Exact color match and factory clip retention on high-visibility driver area
What you get
Factory-spec plastic grade, precise snap-fit, matching interior trim color
OEM-Equivalent (front, passenger side)
Best for
Maintaining matched appearance across both front anchor points
What you get
Mirror-image clip pattern of driver-side unit, same finish and material
OEM-Equivalent (rear / second-row)
Best for
Restoring coverage on middle or rear seat anchor points
What you get
Position-specific bracket tabs sized for rear floor rail or C-pillar mounting
Aftermarket universal-fit
Best for
Budget replacement where color match is less critical or original part is discontinued
What you get
Lower cost, slightly looser tolerances, may require minor trimming for precise fit

Seat belt anchor plate covers brands we stock for your Porsche 912

URO
3 options · from $18.95

Replacing the seat belt anchor plate cover on a Porsche 912

Easy⏱ 15–30 minutesTrim removal tool or flat plastic pry toolPhillips or Torx screwdriver (if retaining screw is present)Needle-nose pliers (to release stubborn retaining clips)Clean cloth (to avoid scratching surrounding trim)

Most seat belt anchor plate covers are retained by plastic snap clips and can be removed by pressing the release tab and pulling the cover straight up or outward; some designs include a single screw beneath the cover that must be removed first. Align the replacement cover over the anchor bracket, press firmly until all clips engage, and verify the seat belt webbing passes cleanly through the opening without binding. No torque-sensitive fasteners are involved in a cover-only replacement.

Frequently asked questions

How much does it cost to replace seat belt anchor plate covers on a Porsche 912?
Parts start at $18.95 at AutoBuffy. Because installation requires no special tools and takes under 30 minutes in most cases, labor cost is minimal if you do it yourself. Shop labor, if needed, is typically billed at less than one hour. Replacing the cover promptly avoids costlier seat belt webbing damage caused by exposed sharp edges.
Is a broken seat belt anchor plate cover a safety issue on a Porsche 912?
Yes, directly. A cracked or missing cover exposes the anchor bolt edge and leaves the seat belt webbing unprotected where it passes through the mount. Over time, a sharp or ragged edge can cut or weaken the webbing, compromising restraint performance in a collision. Replacing a damaged cover is a low-cost step that protects a critical safety component.
Can I drive my Porsche 912 with a missing seat belt anchor plate cover?
Short-term driving is not immediately dangerous, but it is inadvisable. Without the cover, the exposed anchor hardware can abrade and weaken seat belt webbing with every use. In some regions, a visibly damaged or incomplete seat belt assembly can also result in a vehicle inspection failure. Replace the cover as soon as possible to avoid webbing damage.
How do I know which seat belt anchor plate cover fits my Porsche 912?
Fitment depends on the seat position (driver, passenger, rear left, rear center, rear right), the anchor mounting style (floor rail, rocker panel, or B/C-pillar), and model year. Use AutoBuffy's vehicle selector with your Porsche 912 year and trim level to filter the 3 available covers to only those confirmed to fit your specific application.
Do seat belt anchor plate covers need to be replaced in pairs?
There is no mechanical requirement to replace them in pairs, but replacing both front covers at the same time is a common practice when one is damaged. Covers age at similar rates, and matching both ensures consistent color and finish. Rear covers can typically be replaced individually without affecting other positions.
Will an aftermarket seat belt anchor plate cover affect my Porsche 912's seat belt warranty or safety rating?
The cover itself is a trim component and does not affect the certified performance of the seat belt assembly. However, using a cover that fits improperly and causes webbing abrasion could indirectly compromise belt integrity. Choose a cover confirmed to fit your Porsche 912 and inspect the webbing for wear whenever you replace the cover.

Shop seat belt anchor plate covers by year for the Porsche 912

197619691968196719661965

More parts for your Porsche 912

Fuel Tank ClampSeat Belt Receptacle CoverFuel Line BracketClutch Cable BootHornControl Pedal BushingBrake Pad SetHeadliner Retainer

Seat belt anchor plate covers for other Porsche models

Porsche 914Porsche 911