Loading...

Porsche 914 Bumper Caps

Porsche 914 Bumper caps

Bumper caps for your Porsche 914 start at low prices, and AutoBuffy stocks multiple options from top OE-quality brands. A bumper cap is the plastic or rubber end piece that covers and protects the exposed ends of the front or rear bumper fascia. When it cracks, falls off, or goes missing, it leaves the bumper edge vulnerable to further splitting, rust on nearby metal, and a noticeably unfinished appearance.

Signs your Porsche 914 needs a new bumper cap

  • A visible gap or missing piece at one or both ends of the front or rear bumper where the cap has detached
  • Cracked, shattered, or crushed plastic at the bumper corner after a minor impact or parking scrape
  • The bumper fascia edge is beginning to peel away, curl, or split because the end cap no longer holds it flush
  • Rust staining or paint bubbling on adjacent body panels, indicating the exposed bumper edge is trapping moisture
  • A rattling or flapping noise at low speed caused by a cap that is partially detached but not yet fully gone
  • Failed inspection or an insurance photo showing an incomplete bumper assembly due to a missing or broken cap

Which bumper cap should you buy for your Porsche 914?

Bumper caps are position-specific and vehicle-specific, so the first decision is confirming whether you need a front or rear cap and whether it mounts on the driver or passenger side. Beyond fitment, the main trade-off is between OEM-grade direct-fit plastic, flexible urethane versions better suited to low-speed contact, and primed-ready options that accept paint versus pre-painted pieces.

OEM-Equivalent Direct-Fit
Best for
Restoring factory appearance with exact clip and mounting alignment
What you get
Rigid thermoplastic construction, precise hole patterns, matches original profile — typically unpainted or primed
Pre-Painted OEM-Style
Best for
Drop-in replacement with no bodywork, ordered in your Porsche 914's factory color code
What you get
Color-matched finish from the factory, ready to install — premium price, eliminates a trip to the paint shop
Flexible Urethane / Impact-Absorbing
Best for
Drivers in tight urban parking or areas prone to minor contact
What you get
Flexes on light impact and returns to shape rather than cracking, more forgiving than rigid plastic but may need painting
Economy / Value-Grade
Best for
Budget repair or a temporary fix while sourcing a better part
What you get
Lower cost, acceptable fitment on older or high-mileage Porsche 914s, material and finish quality varies by brand

Replacing a bumper cap on a Porsche 914

Easy⏱ 30–60 minutesPlastic trim removal tool or flat pry barPhillips and flathead screwdriversTrim clip removal toolNeedle-nose pliers

Remove the damaged cap by releasing the retainer clips along the bumper edge using a plastic trim tool, working carefully from one end to avoid cracking the surrounding fascia. Swap in any new push-pin clips or retainers before installing the replacement cap, then press it firmly into position until each clip seats with an audible click. No special alignment equipment is needed, and the job rarely requires lifting the vehicle.

Frequently asked questions

How much does it cost to replace bumper caps on a Porsche 914?
Parts alone start at low prices for a single bumper cap on your Porsche 914. Pre-painted or OEM-sourced caps sit at the higher end of the range. Professional installation adds roughly one to two hours of labor depending on clip access. Many owners handle this as a DIY job, keeping total cost close to the part price itself.
Can I drive my Porsche 914 without a bumper cap?
You can drive short distances, but it is not advisable for long. Without the cap, the open bumper edge can catch air at highway speeds and begin to peel the fascia away from the body. Moisture intrusion behind the bumper can also accelerate rust on nearby brackets and body panels, turning a cheap fix into a costly repair.
Do bumper caps on a Porsche 914 need to be painted?
Most direct-fit replacements arrive primed or in raw black plastic and require painting to match your Porsche 914's finish. Pre-painted options matched to your factory color code are available at a higher price and install without any additional bodywork. If the cap sits in a recessed or low-visibility location, many owners leave it in primer.
Are bumper caps the same as bumper end caps or bumper corner covers?
They refer to the same component. The piece that caps, covers, or finishes the outer end of a bumper fascia goes by several names — bumper cap, end cap, bumper corner, or bumper tip — depending on the manufacturer. When searching for your Porsche 914, use all three terms to make sure you are not missing available fitments.
How do bumper caps attach to a Porsche 914?
Most bumper caps on the Porsche 914 use a combination of plastic snap clips, push-pin retainers, and in some cases one or two small bolts or screws accessible from behind the bumper fascia. No adhesive is typically required for a proper fit. Replacing broken retainer clips during installation is recommended since old clips often snap when the damaged cap is removed.
Will any bumper cap fit my Porsche 914, or is fitment strict?
Fitment is strict. Bumper caps are molded to match a specific bumper profile and use unique clip patterns, so a cap from a different model year or trim level often will not align or secure properly. Always verify the part is listed for your Porsche 914's exact year range and, where applicable, your trim level before ordering.

More parts for your Porsche 914

Stabilizer Bar BushingDeck Lid Striker BoltIgnition Contact SetIgnition CoilRack & Pinion BellowsDoor Window Glass Run ChannelEngine Oil Filler BootSeat Belt Anchor Plate Cover