Loading...

Porsche 944 Axle Support Mounts

Porsche 944 Axle support mounts

Axle support mounts for your Porsche 944 start at $184.95, and AutoBuffy stocks 2 options from URO. The axle support mount is a rubber-and-metal bracket assembly that cushions and locates the rear axle or differential housing against the subframe. When it deteriorates, the axle shifts under load, causing handling instability and accelerated drivetrain wear.

Signs your Porsche 944 needs a new axle support mount

  • Clunking or thudding noise from beneath the rear of the vehicle during acceleration or braking
  • Visible cracking, tearing, or complete separation of the rubber bushing around the mount bracket
  • Rear axle visibly shifted or sitting off-center when viewed from behind the vehicle
  • Excessive vibration felt through the floor or seat during acceleration from a stop
  • Uneven or premature rear tire wear caused by axle misalignment under the chassis
  • Loose, vague handling feel — especially when cornering or changing lanes at highway speed

Which axle support mount should you buy for your Porsche 944?

The main decisions are material grade (OE rubber vs. polyurethane) and whether you need a complete mount assembly or just the bushing insert. Position matters too — some {vehicles} use separate front and rear axle mount locations, so confirm which mounting point has failed before ordering.

OE-Replacement Rubber Mount
Best for
Daily drivers wanting a factory ride and simple bolt-on install
What you get
Stock rubber compliance, noise isolation, and direct fit — restores original handling without modification
Polyurethane Bushing Insert
Best for
Performance or tow-duty {vehicles} where axle control outweighs ride comfort
What you get
Firmer axle location, longer service life than rubber, but transmits more road noise and vibration into the cabin
Complete Mount Assembly (bracket + bushing)
Best for
{vehicles} with corroded or bent brackets in addition to worn bushings
What you get
Full unit replacement; eliminates the need to press out old bushings and ensures all hardware is fresh
Heavy-Duty / HD-Rated Mount
Best for
Trucks and SUVs used for towing, hauling, or off-road use
What you get
Reinforced rubber compound and thicker steel bracket rated for higher load cycles and lateral stress

Axle support mounts brands we stock for your Porsche 944

URO
2 options · from $184.95

Replacing the axle support mount on a Porsche 944

Moderate⏱ 1–2 hoursFloor jack and jack standsSocket and ratchet set (metric and standard)Breaker bar or impact wrench for rusted fastenersPry bar for separating bonded rubber bushingsPenetrating oil for corroded hardware

The axle or differential must be supported independently with a jack while the mount fasteners are removed, so it does not drop or stress surrounding components. Fasteners should be torqued to the manufacturer's specification for your Porsche 944 — consult a factory service manual or repair database rather than estimating. Inspect adjacent brake lines, vent hoses, and wiring harness routing before reinstalling to confirm nothing was disturbed.

Frequently asked questions

How much does it cost to replace axle support mounts on a Porsche 944?
Parts start at $184.95 on AutoBuffy. A shop will typically add one to two hours of labor on top of the part cost. DIY-friendly Porsche 944 owners can keep the total expense to the part price alone, since the job usually requires only basic hand tools and a floor jack.
Is it safe to drive a Porsche 944 with a broken axle support mount?
A failed axle support mount is a safety concern and should be addressed promptly. A fully separated mount allows the axle to shift under hard acceleration or braking, which can cause sudden handling changes, uneven brake bias, and damage to brake lines, driveshaft U-joints, or differential seals if left unrepaired.
How long do axle support mounts last on a Porsche 944?
OE rubber mounts typically last many years under normal conditions, but lifespan shortens with heavy towing, off-road use, exposure to road salt, or contact with oil or fluid leaks. Polyurethane replacements generally outlast rubber but require periodic inspection for cracking since the material is less forgiving over time.
Do I need to replace both axle support mounts at the same time on my Porsche 944?
Replacing mounts in pairs or as a complete set is strongly recommended. Mounts age together, so if one has failed, the others are usually near the end of their service life. Replacing only the failed unit often results in a return visit within a short period when the adjacent mount goes.
Will a worn axle support mount cause a vibration or shimmy on my Porsche 944?
Yes. A deteriorated axle support mount allows the axle housing to move outside its designed range, which can produce a rhythmic vibration or shimmy — especially during acceleration or at specific highway speeds. The symptom is often mistaken for a driveshaft or wheel balance issue until the mount is inspected directly.
What brands of axle support mounts are available for the Porsche 944?
AutoBuffy carries 2 axle support mounts for the Porsche 944 from URO. These brands cover OE-equivalent rubber assemblies and heavy-duty options. Confirm the mount position — front differential mount, rear axle cradle mount, or center support — in your fitment selector before adding to cart.

Shop axle support mounts by year for the Porsche 944

199119901989198819871986198519841983

More parts for your Porsche 944

Clutch Release ArmDoor SealBarometric Pressure Sensor ConnectorHVAC Heater Control ValveHVAC RelayEngine Water PumpEngine Oil Pressure SensorAlignment Camber Kit

Axle support mounts for other Porsche models

Porsche 924Porsche 968