Loading...

Porsche 944 Liftgate Lift Supports

Porsche 944 Liftgate lift supports

Starting at $9.95, AutoBuffy stocks 2 liftgate lift supports from FCS. A liftgate lift support is a gas-charged strut that holds your Porsche 944's rear hatch or tailgate open hands-free. When it fails, the liftgate falls unexpectedly under its own weight, creating a safety hazard and making cargo loading a two-person job.

Signs your Porsche 944 needs new liftgate lift supports

  • Liftgate falls down slowly or drops immediately after being raised
  • You have to prop the liftgate open with a stick or your arm to keep it up
  • Liftgate only stays up partway instead of rising to its full open position
  • Visible oil residue or wet streaking on the strut body, indicating a failed gas seal
  • Liftgate feels unusually heavy or requires excessive force to lift manually
  • Strut body is visibly bent, corroded, or the end mounting ball socket is cracked or loose

Which liftgate lift support should you buy for your Porsche 944?

The most important factors are correct extended and compressed length, gas pressure rating (measured in pounds of force), and end fitting style — all must match the original specs for your Porsche 944. Aftermarket options range from economy replacements to OE-equivalent units; on rear hatches with dual supports, both struts should always be replaced as a pair so lift force stays balanced.

Economy / Value
Best for
Budget-conscious repairs, older high-mileage Porsche 944s
What you get
Meets minimum OE lift force specs; shorter expected service life; adequate for everyday use
OE-Equivalent (Premium Aftermarket)
Best for
Most Porsche 944 owners wanting OEM performance
What you get
Matched gas pressure, end fittings, and travel length; longer service life; direct bolt-on fit
OEM Replacement (Dealer-Sourced)
Best for
Porsche 944s under warranty or with strict fit requirements
What you get
Exact factory spec, guaranteed fitment; typically highest cost option
Sold as Pair
Best for
Any Porsche 944 with two supports (most hatchbacks and SUVs)
What you get
Balanced lift force, prevents uneven stress on hinges; best value when both struts are worn

Liftgate lift supports brands we stock for your Porsche 944

FCS
2 options · from $9.95

Replacing liftgate lift supports on a Porsche 944

Easy⏱ 15–30 minutesFlat-head screwdriver or trim pry tool (for clip-style end fittings)Safety prop or second person to hold liftgate openSafety glassesNeedle-nose pliers (if retaining clips are present)

Prop the liftgate securely open, then use a pry tool or your thumb to pop each strut end off its ball stud — start at the bottom mount and work upward. Snap the new struts onto the ball studs in reverse order, bottom first, until each end clicks firmly into place. No special tools or torque specs are required; the press-fit ball socket is the only fastener on most Porsche 944 applications.

Frequently asked questions

How much does it cost to replace liftgate lift supports on a Porsche 944?
Parts for a Porsche 944 start at $9.95 per strut at AutoBuffy. Most vehicles use two supports, so budget for a pair. Professional labor is typically under an hour and adds modest shop fees. Replacing them yourself is straightforward and cuts the total cost significantly.
Can I drive my Porsche 944 with a broken liftgate lift support?
Yes, a failed lift support does not affect driveability. However, a liftgate that drops unexpectedly can cause head or hand injuries during loading and unloading. It can also stress hinge hardware over time. Replacement is low cost and low effort, so there is little reason to leave it unrepaired.
Do I need to replace both liftgate lift supports at the same time on my Porsche 944?
Yes. Lift supports wear at roughly the same rate because they share the same load cycles. Replacing only one leaves mismatched gas pressure, causing the liftgate to open unevenly and placing extra stress on hinges and the stronger strut. Replacing both at once also saves labor time on your Porsche 944.
How long do liftgate lift supports last on a Porsche 944?
Service life varies with climate, use frequency, and part quality, but most lift supports last somewhere between 50,000 and 100,000 miles or roughly five to ten years. Exposure to extreme cold, road salt, and frequent liftgate cycling shortens that range noticeably on a Porsche 944 used in harsh conditions.
Are aftermarket liftgate lift supports as good as OEM on a Porsche 944?
Premium aftermarket lift supports from established brands like FCS are engineered to match OE gas pressure, end fitting dimensions, and travel length. For most Porsche 944 owners they perform on par with dealer parts at a lower price. Economy-grade units may have a shorter service life but still restore safe liftgate function.
How do I know which liftgate lift support fits my Porsche 944?
The critical specs are extended length, compressed length, gas force rating in pounds, and end fitting type — typically a ball socket or pin. Use AutoBuffy's year-make-model lookup to filter 2 available options down to confirmed fits for your Porsche 944. Never rely on visual similarity alone, as dimensions vary across trim levels.

Shop liftgate lift supports by year for the Porsche 944

199119901989198819871986198519841983

More parts for your Porsche 944

Clutch Release ArmDoor SealBarometric Pressure Sensor ConnectorHVAC Heater Control ValveHVAC RelayEngine Water PumpEngine Oil Pressure SensorAlignment Camber Kit

Liftgate lift supports for other Porsche models

Porsche CayennePorsche 924Porsche 968Porsche 928Porsche MacanPorsche Panamera