Loading...

Porsche Boxster Ignition Lock Housings

Porsche Boxster Ignition lock housings

Starting at $266.95, AutoBuffy stocks 1 ignition lock housings from URO for the Porsche Boxster. The ignition lock housing is the outer shell that surrounds and supports the ignition cylinder and switch assembly. When it cracks, wears, or breaks, the key may not turn, the steering column lock can fail to release, or the vehicle may not start at all.

Signs your Porsche Boxster needs a new ignition lock housing

  • Key binds, sticks, or requires excessive force to turn in the ignition
  • Steering column lock does not release even after inserting and turning the key
  • Visible cracks, chips, or broken tabs on the plastic housing around the ignition cylinder
  • Ignition cylinder wobbles or feels loose because the housing no longer holds it securely
  • Key gets stuck and cannot be removed after switching the ignition off
  • Intermittent no-start condition caused by the cylinder shifting inside a damaged housing and failing to actuate the ignition switch

Which ignition lock housing should you buy for your Porsche Boxster?

The primary decision is whether you need just the outer housing shell or a complete assembly that includes the ignition cylinder and/or switch. You also need to match the housing to the correct column position — tilt or fixed — and verify whether your Porsche Boxster uses a keyed or passkey/transponder-equipped cylinder, since some housings are sold pre-assembled with matched components.

Housing shell only
Best for
Housing is cracked but cylinder and switch are undamaged
What you get
Plastic or die-cast outer casing; you reuse your existing cylinder and key
Housing with ignition cylinder (lock set)
Best for
Cylinder is worn or keys are lost and you want a matched set
What you get
Housing plus a new keyed cylinder; may require rekeying to match door locks
Complete ignition assembly (housing + cylinder + switch)
Best for
Multiple components are damaged or column has been tampered with
What you get
Ready-to-install unit; eliminates mismatched components and extra labor
OEM-equivalent replacement
Best for
Owners who want factory fitment and long-term durability
What you get
Meets original specifications for mounting tabs, wiring connector position, and cylinder retention

Ignition lock housings brands we stock for your Porsche Boxster

URO
1 option · from $266.95

Replacing the ignition lock housing on a Porsche Boxster

Moderate⏱ 1–2 hoursSteering wheel pullerTorx and Phillips screwdriversTrim panel removal toolsSmall flathead screwdriver or lock cylinder release pinMultimeter (if testing ignition switch continuity)

Replacing the ignition lock housing on a Porsche Boxster requires removing the steering column shroud panels to access the housing, releasing the ignition cylinder with a small pin or tool inserted into the release slot, and unbolting the housing from the column. Reassemble in reverse order, ensuring the cylinder retention tab clicks fully into the new housing before reinstalling column covers. If your Porsche Boxster has an airbag, disconnect the battery and observe the manufacturer's recommended wait time before working near the steering column.

Frequently asked questions

How much does it cost to replace ignition lock housings on a Porsche Boxster?
Parts for a Porsche Boxster ignition lock housing start at $266.95 at AutoBuffy. A housing-only replacement is the least expensive route. Opting for a complete assembly with cylinder and switch costs more upfront but reduces labor time. Professional installation typically adds one to two hours of shop labor on top of the part cost.
Can I replace the ignition lock housing on my Porsche Boxster without replacing the ignition cylinder?
Yes, if your ignition cylinder and key are in good working order, you can swap just the housing shell and reinstall your existing cylinder. This preserves your original key and avoids any transponder or passkey reprogramming. Inspect the cylinder for wear before reinstalling it inside a new housing.
Will I need to reprogram my key or anti-theft system after replacing the ignition lock housing on a Porsche Boxster?
Replacing the housing shell alone does not require reprogramming because the transponder-equipped cylinder stays in place. However, if the replacement kit includes a new ignition cylinder with a different key code, the transponder or passkey system will likely need to be reprogrammed by a locksmith or dealer to recognize the new key.
How long does an ignition lock housing last on a Porsche Boxster?
Ignition lock housings are plastic or pot-metal components and typically last many years under normal use. Premature failure is usually caused by forcing a stuck key, heavy keychains that stress the cylinder over time, attempted theft, or UV-related brittleness in older housings. Inspect yours if you notice any play or resistance when inserting the key.
Is a broken ignition lock housing a security risk on a Porsche Boxster?
Yes. A cracked or loose housing can allow the ignition cylinder to be manipulated without a key, making the vehicle easier to steal. It can also prevent the steering column lock from engaging properly when the vehicle is parked. Replace a damaged housing promptly to maintain both drivability and vehicle security.
How do I know which ignition lock housing fits my Porsche Boxster?
Use your Porsche Boxster year, make, model, trim, and transmission type to filter results. Some Boxster variants use different housings depending on whether the steering column is tilt or fixed, or whether the vehicle has a passkey anti-theft system. AutoBuffy lists 1 options across 1 brands including URO with fitment filters to narrow your selection.

Shop ignition lock housings by year for the Porsche Boxster

20042003200220012000199919981997

More parts for your Porsche Boxster

Engine Cooling Fan SwitchAir Bag RelayEngine Coolant ThermostatCV Joint BootClutch Slave CylinderWindshield Washer Pump GrommetAccessory Drive Belt TensionerIgnition Coil Connector

Ignition lock housings for other Porsche models

Porsche 911