Abutment Clips IncludedNo
Anti-Rattle Spring IncludedYes
Bleeder Screw IncludedYes
Bleeder Screw Thread Diameter (Mm)10 mm
Bleeder Thread Diameter10X1
Caliper Slides IncludedNo
Caliper TypeFixed
Grade TypePerformance
Inlet Fitting TypeStraight
Inlet Thread Diameter (In)0.39 in
Inlet Thread Diameter (Mm)10 mm
Length (In)12.62 in
Mount Hole Diameter (In)0.55in
Mount Hole Diameter (Mm)14mm
Mounting Bolt IncludedNo
Mounting Bracket IncludedNo
Mounting Hardware IncludedNo
Pad Wear Sensor IncludedNo
Pads IncludedNo
Piston 1 Diameter (In)1.65in
Piston 1 Diameter (Mm)42mm
Piston 2 Diameter (In)1.65in
Piston 2 Diameter (Mm)42mm
Piston 3 Diameter (In)1.65in
Piston 3 Diameter (Mm)42mm
Piston 4 Diameter (In)1.65in
Piston 4 Diameter (Mm)42mm
Bleeder Screw Quantity2
Bleeder Screw Thread SizeM10
Brake Caliper ManufacturerBrembo
Caliper ColorBlack
Features Benefits - Bullet 1Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Features Benefits - Bullet 2GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features Benefits - Bullet 3GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Features Benefits - Bullet 4GM regularly updates production and service part designs to integrate new materials and technologies
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (In)9 in
Integrated Parking BrakeNo
Piston Quantity4
Product DescriptionGM Genuine Parts Disc Brake Calipers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Calipers are hydraulic components mounted over the brake rotor. The c
Programming RequiredNo
Signs Of Wear Troubleshooting - Section 1 - Bullet 1Vehicle pulls to the left or right when brakes are applied.
Signs Of Wear Troubleshooting - Section 1 - Bullet 2Brake pedal pulsation (not to be confused with normal ABS operation).
Weight8.6 LB
Width (In)11.38 in