Abs Tone Ring IncludedNo
Bolt Circle Diameter (In)4.409 in
Bolt Circle Diameter (Mm)112 mm
Bolt Hole Diameter (In)0.6 in
Bolt Hole Diameter (Mm)15.25 mm
Center Hole Diameter2.638 IN
Conventional Or Drum-In-Hat Type RotorConventional
Grade TypeRegular
Inside Diameter8.583 IN
MaterialCast Iron
Mounting Bolt Hole Circle Diameter4.409 IN
Mounting Bolt Hole Diameter0.6 IN
Outside Diameter12.598 IN
Solid Or Vented Type RotorVented
Surface TypeX Drilled
Bolt Hole Quantity5
ConstructionFull Cast
Disc FinishCoated
Discard Thickness0.866 IN
Faq - Answer 1Yes, ACDelco also offers GM OE brake rotor and Advantage brake rotors.
Faq - Question 1Does ACDelco offer other grades of brake rotors?
Features Benefits - Bullet 1Inspected for balance; resulting in smooth brake operation and noise reduction
Features Benefits - Bullet 2Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
Features Benefits - Bullet 3Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration
Features Benefits - Bullet 4Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Features Benefits - Bullet 5Premium aftermarket replacement part
Features Benefits - Bullet 6Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Hat FinishCoated
Height (In)1.99 in
Height (Mm)50.6 mm
Lug Quantity5
Mounting Bolt Hole Quantity5
Nominal Thickness0.945 IN
Original Equipment ReplacementYes
Overall Height1.992 IN
Product DescriptionACDelco Gold (Professional) Disc Brake Rotors are a high quality alternative to Original Equipment (OE) parts. They feature a thickness variation that is less than 0.0004 to minimize pedal pulsation,
Programming RequiredNo
Rust Resistant CoatingYes
Signs Of Wear Troubleshooting - Section 1 - Bullet 4Vehicle pulls to the left or right when brakes are applied.
Signs Of Wear Troubleshooting - Section 1 - Bullet 5Visible ridges or deep grooves on the rotor surface.
SlottedNo
Stud/Lug Hole Quantity5