Abutment Clips IncludedNo
Backing MaterialSteel
Bleeder Screw Cap IncludedNo
Bolts IncludedNo
Brake Lubricant IncludedNo
Friction Material AttachmentBonded
Friction Material CompositionCeramic
Grade TypeStandard Replacement
Inner Pad Friction Material Thickness9.5 MM
Inner Pad Friction Material Thickness (In)0.37in
Mounting Hardware IncludedNo
Outer Pad Friction Material Thickness0.37 IN
Pad Shim MaterialSteel
Pad Shims IncludedNo
Pad Wear Sensor IncludedYes
Pad Wear Sensor TypeElectronic and Mechanical
Adhesive Backed Pad ShimNo
Backing Plate ColorBlack
Chamfered EdgesYes
Features Benefits - Bullet 1Integrally molded - friction material molded to backing plate for bond integrity
Features Benefits - Bullet 2Premium shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
Features Benefits - Bullet 3Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Features Benefits - Bullet 4GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features Benefits - Bullet 5GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Features Benefits - Bullet 6GM regularly updates production and service part designs to integrate new materials and technologies
Friction Surface ScorchedNo
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Inner Pad Height2.74 IN
Inner Pad Overall Thickness0.6 IN
Inner Pad Width4.31 IN
Outer Pad Height2.74 IN
Outer Pad Overall Thickness0.6 IN
Outer Pad Width4.31 IN
Pad Quantity4
Pad Shim ColorBlack
Prepared For Pad Wear SensorYes
Product DescriptionGM Genuine Parts Disc Brake Pads are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Disc Brake Pads are the friction material used in disc brakes that press
Programming RequiredNo
Signs Of Wear Troubleshooting - Section 1 - Bullet 1Brake pedal pulsation (not to be confused with normal ABS operation).
Signs Of Wear Troubleshooting - Section 1 - Bullet 2Vehicle pulls to the left or right when brakes are applied.
SlottedNo
Wear Indicator AttachedYes