Check if this fits your car first
We can’t guarantee fitment or accept fitment returns without a vehicle selected.
Year
Make
Model
Trim
Engine
Select Year
Select Make
Select Model
Or call us at 888-477-2530 — we’ll help you out.
$15.95
Check if this fitsShop worry-free by verifying fitment first. If the part doesn't fit, we'll make it right or refund you. Learn more
Main Image
Click to expand
1 / 2
SKF Transfer Case Output Shaft Seal
Authorized Dealer
SKF Transfer Case Output Shaft Seal
BrandSKFLearn More
Qty/Vehicle1
ConditionNew
Includes: (1) Transfer Case Output Shaft Seal, Hardware
20% OFF$1595
$19.95Save $4.00•In Stock•Fast ShippingPro Price:$14.36Businesses Only
for FREE to save on select items.
1
Estimated Delivery by calculating...
Calculating shipping time...
Ships to
Product Specifications
Features & Benefits
- •Direct OE fit - no modifications needed
- •Meets or exceeds manufacturer specs
- •24-month warranty included
- •Fast Shipping — ships same day before 3 PM ET
BrandSKF
Part Number15450
Part TypeTransfer Case Output Shaft Seal
ConditionNew
Body Length14 IN
Compressed Length14.5 IN
Compatibility
Vehicle Compatibility
Guaranteed to fit 0 vehicles from Infinity--Infinity
No compatibility data available
Frequently Asked Questions
We're always here to help. If you can't find your answer, ask Rydon - our AI assistant will help you out.
Will this fit my car?
Check your year, make, and model in the vehicle fitment chart above to confirm compatibility.
Compatibility
Vehicle Compatibility
Guaranteed to fit 0 vehicles from Infinity--Infinity
No compatibility data available
Product Specifications
Brand
SKF
Part Type
Transfer Case Output Shaft Seal
Compressed Length
14.5 IN
Extended Length
21.5 IN
Part Number
15450
Body Length
14 IN
Effective Length
1143 MM
Material
Fiber Loaded Rubber
Body Length14 IN
Compressed Length14.5 IN
Effective Length1143 MM
Extended Length21.5 IN
MaterialFiber Loaded Rubber
Outside Diameter2.506 IN
Sealing Surface TypeNitrile
Shaft Diameter1.552 IN
Stroke Length7 IN
Travel Length7 IN
Angle36 Degrees
Banded BeltN
Belt ConstructionBottom Cog
ColorBlack
Dimensions28.15" L x 6.30" W x 6.69" H
Faq - Answer 1Yes, this may be indicative of an alignment issue or a failed tensioner.
Faq - Answer 2Yes, you may lose your power steering or stall out. Your car is not drivable when your drive belt fails.
Faq - Answer 3Yes, the leading causes of belt failure are improper tension and misaligned pulleys. Both these conditions cause excessive heat which leads to belt failure. Have your belts checked every 3,000 miles f
Faq - Answer 4No, when the belt backing has been torn or cracked, the belt should be replaced.
Faq - Answer 5No, use the belt in the way it's listed in the ACDelco belts and hoses catalog.
Faq - Answer 6No, remember the leading cause of belt failure is improper tension and misaligned pulleys. Improper tension will cause the belt to slip and you may notice a loss of performance from the air conditioni
Faq - Question 1Could an automotive belt tear during use?
Faq - Question 2Will I know immediately if an automotive belt tears?
Faq - Question 3Are there steps I can take to ensure a longer automotive belt life?
Faq - Question 4Is there a way to repair a torn automotive belt?
Faq - Question 5Can I use the same automotive belt for multiple uses?
Faq - Question 6Will a worn automotive belt affect gas mileage?
Features Benefits - Bullet 1Its fiber loaded rubber stock puts more flexibility along the length of the belt, yet gives the belt greater lateral stability in the pulley
Features Benefits - Bullet 2Has thermally active tensile cords that provide maintenance free performance when properly installed and tensioned
Features Benefits - Bullet 3Manufactured with form ground to ensure precise top width and sidewall dimensional control for proper fit in the pulley as well as a smoother, quieter running belt
Good Maintenance Practices - Section 1 - Bullet 1Do not use belt dressings to stop belt slippage or noise. These are oil based and may cause belt deterioration.
Good Maintenance Practices - Section 1 - Bullet 2Never twist a belt more than 90 degrees during inspection. This may damage the tensile cords and cause premature failure.
Good Maintenance Practices - Section 1 - Bullet 3Replace serpentine belts every 60,000 - 100,000 miles. Check vehicle's owner's manual.
Good Maintenance Practices - Section 1 - Bullet 4Replace V-belts after 3 to 4 years, or every 36,000 to 48,000 miles.
Good Maintenance Practices - Section 1 - Bullet 5Use an approved tension gauge to check belt tension.
Good Maintenance Practices - Section 1 - Bullet 6Check for proper belt tension after 500 to 1,000 miles following belt installation. Recheck often, at least twice a year or every 6,000 miles.
GradeEconomy
Max Year Covered2005
Maximum Operating Temperature79.4 C
Measurements41 3/8 in x 45 5/8
Min Year Covered2001
Minimum Operating Temperature-35 F
Most Popular Make / ModelDodge Stratus
Most Popular Year2004
Outside Circumference1158 MM
PositionRear
Product DescriptionACDelco Professional, premium aftermarket V-Belts serve as replacement belts for today's most demanding engine drives. Due to thermal forces, these variable notched belts actually tighten on the drive
Product GradeEconomy
Signs Of Wear Troubleshooting - Section 1 - Bullet 1Rubber Loss: (most common belt wear) a belt wear gauge measures rubber loss, which can result in reduced power transfer from the crank to the accessories.
Signs Of Wear Troubleshooting - Section 1 - Bullet 2Glazing: shiny spots can indicate a slipping belt that isn't properly transferring power to accessories.
Signs Of Wear Troubleshooting - Section 1 - Bullet 3Pilling: worn rubber can fill in grooves and cause noise, heat, vibration, and excessive wear.
Signs Of Wear Troubleshooting - Section 1 - Bullet 4Abrasion: wear along the side could indicate misalignment due to a failed tensioner.
Signs Of Wear Troubleshooting - Section 1 - Bullet 5Cracking: older neoprene belts crack as they near the end of their life cycle and often need to be replaced.
Signs Of Wear Troubleshooting - Section 1 - Bullet 6Engine stops or backfires.
Signs Of Wear Troubleshooting - Section 1 - Bullet 7The belt is producing a squealing noise.
Signs Of Wear Troubleshooting - Section 1 - Bullet 8Headlights dim while driving.
Signs Of Wear Troubleshooting - Section 1 - Bullet 9Loss of battery charge.
Special NoteFully Assembled; Ready to Install
StandardsSAE J636, SAE J637
Top CoggedNo
Top Width0.41 IN
Total Part Vio62975
Weight10.41 lbs
Width0.500 IN
Check if this fitsShop worry-free by verifying fitment first. If the part doesn't fit, we'll make it right or refund you. Learn more
Main Image
Click to expand
1 / 2
SKF Transfer Case Output Shaft Seal
Authorized Dealer
$1595
$19.95SAVE 20%
Dealer charges $28.93— save $12.98
QTY
1
Pro Price:$14.36Businesses Only
for FREE to save on select items.
Fast delivery Thu, Jun 25
Ships To —Edit
In Stock·Hurry, 5 Left
Pro Price:$14.36Businesses Only
for FREE to save on select items.
Fast
Shipping
Shipping
30-Day
Returns
Returns
24-Mo
Warranty
Warranty
ExpertSupport
OE REPLACEMENT
SKF Transfer Case Output Shaft Seal
|
Part #:15450
|
Transfer Case Output Shaft Seal
$15.95In Stock
$19.95Save 20%
Quantity:
1
In Stock·Hurry, 5 Left
Fast delivery between Thu, Jun 25 to Thu, Jun 25
Ships To:Key Features
OEM-Equivalent QualityMeets/exceeds factory specs
American BusinessMaryland since 1986
24-Month WarrantyLimited coverage on every part
Fast Same Day ShippingWe ship all orders the same business day before cutoff
Product Specs
BrandSKF
Part Number15450
Part TypeTransfer Case Output Shaft Seal
ConditionNew
Body Length14 IN
Compressed Length14.5 IN
Effective Length1143 MM
Extended Length21.5 IN
Compatibility
Vehicle Compatibility
Guaranteed to fit 0 vehicles from Infinity--Infinity
No compatibility data available
Questions & Answers
Check your year, make, and model in the vehicle fitment chart above to confirm compatibility.
Have a Question?
Ask Marvin, our Car Expert
Offline
Things to Know
About This Transfer Case Output Shaft Seal
This SKF automotive component is engineered to meet or exceed OEM specifications for reliable performance and long service life.
Key Features
- Meets or exceeds OEM specifications
- Direct-fit replacement design
- Rigorously tested for durability
- Professional-grade construction
- Backed by manufacturer warranty
Signs This Part Needs Replacement
- •Unusual noises from the component area
- •Decreased vehicle performance
- •Warning lights on dashboard
- •Visible wear or damage
- •Failed vehicle inspection
SKF
Trusted Automotive Brand
SKF is a trusted manufacturer of quality automotive parts.
View all SKF productsInstallation Guide
Moderate
1-3 hours
Tools Needed
Basic hand toolsTorque wrenchVehicle service manual
Frequently Asked Questions
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which are known to the State of California to cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts