Loading...
Starting at $105.95, AutoBuffy stocks 1 fuel pump cut-off switches from Standard Ignition. This inertia-activated safety switch cuts power to the fuel pump during a collision to prevent fire. When it fails or trips without resetting correctly, the engine won't start or dies unexpectedly — leaving your Renault R15 stranded even though nothing else is wrong.
The main decision is whether to match the OE-style inertia switch or upgrade to an aftermarket calibrated unit. Fitment location — trunk, cargo area, or footwell — varies by vehicle, so confirming the connector type and mounting tab pattern is essential before ordering.
| Option | Best for | What you get |
|---|---|---|
| OE-Equivalent Replacement | Restoring factory function with a guaranteed fit | Same calibration threshold, identical connector, and direct bolt-in mounting as the original switch |
| Heavy-Duty / High-Sensitivity Unit | Vehicles used on rough terrain or with a modified fuel system | Lower trip threshold catches harder jolts; often rated for higher amp draw from performance fuel pumps |
| Adjustable Aftermarket Switch | Track or off-road builds where reset frequency matters | User-selectable G-force sensitivity so the switch trips only when you want it to, not on every pothole |
| Integrated Relay-and-Switch Assembly | Vehicles where the relay and inertia switch are combined in one housing | Single-unit replacement that eliminates the need to diagnose two separate components when the circuit fails |
Disconnect the battery, remove any interior trim panels covering the switch location, and unplug the wiring connector before unbolting or unclipping the old switch. Install the new switch in the same orientation, reconnect the harness, press the reset button to arm it, then reconnect the battery and confirm the fuel pump primes normally before starting the engine. No special torque is required — mounting hardware only needs to be snug so the switch doesn't vibrate loose.