Loading...

Subaru Brat Door Remote Mirror Switchs

Subaru Brat Door remote mirror switchs

Starting at low prices, AutoBuffy stocks multiple door remote mirror switches for the Subaru Brat from trusted brands including top OE-quality brands. This switch controls the electric adjustment of your side mirrors from inside the cabin. When it fails, you lose the ability to reposition mirrors safely — a real hazard for lane changes and parking.

Signs your Subaru Brat needs a new door remote mirror switch

  • One or both mirrors won't move in any direction when the switch is pressed
  • Mirror adjusts in only one axis (up/down works but left/right doesn't, or vice versa)
  • Switch feels loose, sticky, or the selector knob spins without engaging
  • Mirror moves intermittently — works sometimes, stops working without warning
  • Only the driver-side or passenger-side position on the selector produces any response
  • Mirror folds or unfolds on its own, or fold function stops responding while adjustment still works

Which door remote mirror switch should you buy for your Subaru Brat?

The main decisions are OEM-equivalent fit versus aftermarket value, and whether you need a switch with integrated mirror fold/heat controls or a basic adjustment-only unit. Always confirm the switch matches your door position (driver or passenger side) and the number of control functions your Subaru Brat originally came with.

OEM Replacement (exact fit)
Best for
Owners who want factory feel and guaranteed plug-and-play fitment
What you get
Matches original connector, button layout, and selector detents precisely
Aftermarket Direct-Fit
Best for
Budget-conscious repairs where OE price is hard to justify
What you get
Compatible connector and function at lower cost; quality varies by brand
Switch with Fold + Heat Controls
Best for
Subaru Brat trims equipped with power-folding and/or heated mirrors
What you get
Single unit controls adjustment, fold, and heat — avoids buying multiple switches
Adjustment-Only Switch
Best for
Base trims without power fold or heat
What you get
Simpler design, lower cost, correct for vehicles without premium mirror features

Replacing the door remote mirror switch on a Subaru Brat

Easy⏱ 20–45 minutesPlastic trim removal tool or pry barFlathead screwdriverSmall Phillips screwdriverNeedle-nose pliers (for connector release tabs)

The switch typically snaps into a pocket in the driver's door panel or armrest and is held by plastic clips rather than screws. Release the retaining clips with a trim tool, squeeze the wiring harness connector tab, and pull it free before plugging in the new switch. No calibration is needed — reconnect the battery if you disconnected it, and test all switch positions before reassembling the panel.

Frequently asked questions

How much does it cost to replace door remote mirror switches on a Subaru Brat?
Parts start at low prices on AutoBuffy. A shop will typically add one hour of labor on top of the part cost. Because the switch usually unclips from the door panel without major disassembly, total out-of-pocket costs are modest compared to most electrical repairs, and many owners handle it themselves.
Can a bad mirror switch damage the mirror motors on a Subaru Brat?
A failing switch is unlikely to burn out mirror motors on its own. However, a switch with an internal short can send continuous voltage to a motor, causing it to overheat over time. If your mirrors feel warm or sluggish before the switch fully fails, replace the switch promptly to protect the motors.
How do I know if the problem is the switch or the mirror motor on my Subaru Brat?
Swap the selector to the opposite mirror and test. If neither mirror responds on any setting, the switch is likely the fault. If one mirror works fine and the other doesn't regardless of switch position, the problem is the non-responsive mirror's motor or wiring, not the switch itself.
Is the door remote mirror switch on a Subaru Brat side-specific?
Yes. The switch mounts in the driver's door panel and uses a selector to choose left or right mirror, so there is only one switch unit — but it must match your Subaru Brat's trim level. Confirm whether your factory switch includes controls for mirror heat, power folding, or memory positioning before ordering.
Will a used mirror switch work as a replacement on a Subaru Brat?
A used switch can work if it comes from the same model and trim, but internal contact wear is invisible and hard to assess. Given that new aftermarket switches start at low prices, most technicians recommend a new unit over used to avoid replacing a failing part with another part that may fail soon.
Do I need to reprogram anything after replacing the mirror switch on a Subaru Brat?
In most cases, no programming is required. The switch is a passive electrical component — plug in the connector and it operates immediately. Vehicles with memory mirror systems tied to a seat-position profile may need the mirror positions saved again through the normal driver-memory setup procedure described in the owner's manual.

More parts for your Subaru Brat

Engine Coolant Water OutletA/C System Seal KitA/C System O-Ring and Gasket KitUniversal JointEngine Oil Pressure SwitchEngine Torque Strut BushingBrake Master CylinderSpark Plug Wire Set

Door remote mirror switchs for other Subaru models

Subaru StandardSubaru OutbackSubaru LegacySubaru DLSubaru GL