Loading...
Starting at $59.95, AutoBuffy stocks 1 headlight relays from Standard Ignition to fit the Volkswagen Fastback. The headlight relay is an electrical switch that routes high-current power directly to your headlights, protecting the switch and wiring from overload. When it fails, headlights may go dark entirely or behave erratically — a real safety hazard on the road.
Headlight relays are selected primarily by amperage rating, relay type (standard vs. sealed), and whether you need low-beam only, high-beam only, or a combined unit. Match the replacement to the original relay's pin layout and current rating to ensure safe, reliable operation. OE-exact fitment relays are the safest choice; universal relays work in a pinch but may require terminal modification.
| Option | Best for | What you get |
|---|---|---|
| OE-Exact Replacement | Drivers who want drop-in fit and factory reliability | Correct amperage, pin count, and footprint matched to the original — no modifications needed |
| High-Amperage Upgraded Relay | Vehicles with aftermarket HID or LED headlight conversions drawing more current | Heavier-duty contacts rated for higher continuous loads, reducing heat and extending relay life |
| Sealed / Weatherproof Relay | Vehicles in wet climates or with an exposed fuse box location | Fully sealed housing that resists moisture, salt, and corrosion for longer service life |
| Universal 4- or 5-Pin Relay | Budget repairs or bench-test situations where exact OE part is unavailable | Generic design that fits many applications but may need adapter terminals or wiring modification |
Locate the fuse and relay box using the Volkswagen Fastback owner's manual or the diagram printed inside the fuse box cover, identify the headlight relay by position, and pull it straight out using a relay puller or needle-nose pliers. Before installing the new relay, spray the socket with electrical contact cleaner to remove any corrosion that could cause intermittent contact. Press the replacement relay firmly into the socket until it seats fully, then test both beam modes before closing the hood.