Loading...
Engine mount bushings for your Volkswagen Golf start at $20.95, and AutoBuffy stocks 1 options from DEA. The bushing is the rubber or polyurethane cushion inside the engine mount that absorbs vibration and isolates the engine from the chassis. When it tears or collapses, you get harsh vibration, clunking, and engine movement that can stress nearby components.
The main decision is material: OEM-style rubber bushings restore factory ride quality, while polyurethane bushings are firmer and more durable but transmit more vibration into the cabin. You also need to match the bushing to the correct mount position — front, rear, side, or torque strut — because geometry and load ratings differ by location.
| Option | Best for | What you get |
|---|---|---|
| OEM Rubber Replacement | Daily drivers and comfort-focused owners | Factory-matched hardness, minimal NVH increase, direct-fit installation |
| Polyurethane Bushing | Performance use, high-torque engines, or owners who have already burned through rubber bushings | Greater durability and reduced engine movement, at the cost of more vibration transmitted to the cabin |
| Solid Aluminum Insert (Delrin/Solid) | Track or competition vehicles only | Zero flex, maximum engine stability, but harsh on the street and accelerates frame and transmission wear |
| Complete Mount with Bushing Pre-Installed | High-mileage vehicles where the mount bracket is also degraded | Entire assembly replaced at once, reducing labor time and ensuring bushing-to-bracket fit is correct |
Support the engine securely before loosening any mount bolts, as removing a mount without support allows the engine to drop and can damage wiring, hoses, or the oil pan. Press or drive out the old bushing, clean the housing bore, and press the new bushing in until fully seated and flush. Torque all fasteners to the manufacturer specification found in your Volkswagen Golf service manual before lowering the engine back onto the mounts.