Loading...
Starting at $159.95, AutoBuffy stocks 1 neutral safety switch relays from Standard Ignition to fit your Volkswagen Sharan. This relay works alongside the neutral safety switch to prevent the engine from cranking in any gear except Park or Neutral. When it fails, the starter may not engage at all, or the engine may crank in any gear — a serious safety hazard.
The neutral safety switch relay is a small but safety-critical component, and the right choice depends on whether you need an OE-equivalent replacement or a heavy-duty upgrade. Pay attention to terminal count and connector style, as these vary across model years within the same Volkswagen family. Verify fitment by year and transmission type before ordering.
| Option | Best for | What you get |
|---|---|---|
| OE-Replacement Relay | Owners wanting a direct plug-and-play fix with no modifications | Matched terminal layout, OE-spec coil resistance, and correct voltage rating for the Volkswagen Sharan inhibit circuit |
| Heavy-Duty Relay | High-mileage vehicles or those in extreme heat or cold climates | Reinforced contact points and higher cycle rating to resist arcing and premature failure under demanding conditions |
| Relay + Neutral Safety Switch Combo Kit | Vehicles with intermittent no-start where root cause is unclear | Both components replaced together, eliminating the most common points of failure in the inhibit circuit in a single service |
| OEM-Brand Relay | Owners who want factory-sourced quality and longest expected service life | Manufactured to the same specification as the part installed at the assembly plant, with exact materials and tolerances |
Locate the relay in the underhood fuse and relay box or interior fuse panel using the diagram on the lid or in the owner's manual — the neutral safety or starter inhibit relay is usually labeled. Pull the old relay straight out, spray the socket terminals lightly with electrical contact cleaner, and press the new relay firmly into the socket until it seats. Confirm correct operation by attempting to crank the engine in Park, Neutral, and a drive gear before returning the vehicle to service.