Loading...

Volvo 760 Fog Light Lenss

Volvo 760 Fog light lens

Fog light lens replacements for your Volvo 760 start at low prices, with multiple options in stock from brands including top OE-quality brands. The fog light lens is the clear or lightly tinted plastic cover that protects the bulb and focuses light close to the road in low-visibility conditions. A cracked, yellowed, or shattered lens scatters light instead of projecting it, reducing visibility and failing inspection.

Signs your Volvo 760 needs a new fog light lens

  • Visible cracks, chips, or a shattered lens housing from road debris or a minor impact
  • Heavy yellowing or cloudiness that no amount of polishing restores to clarity
  • Moisture or condensation trapped inside the fog light that won't evaporate — a sign the lens seal is broken
  • Noticeably dim or unevenly scattered fog light beam compared to the other side
  • Melted or warped plastic on the lens face caused by bulb heat entering through a crack
  • Failed state safety or emissions inspection due to a broken or non-functional fog light lens

Which fog light lens should you buy for your Volvo 760?

The most important decisions are OE fit versus aftermarket style, and whether you need just the lens cover or a complete fog light assembly. Some Volvo 760 fog light designs allow lens-only replacement; others require the full housing because the lens is bonded in. Check your existing unit before ordering.

OE-Replacement Lens (Clear)
Best for
Restoring factory appearance and beam pattern
What you get
Direct-fit clear lens matched to original dimensions; maintains stock light output and DOT compliance
OE-Replacement Lens (Smoked/Tinted)
Best for
Drivers who want a subtle styling change with legal light transmission
What you get
Factory-fit lens with light tint; check local regulations, as very dark tints may not be street legal
Lens + Housing Assembly
Best for
Situations where the housing itself is cracked, corroded, or the lens is bonded and non-separable
What you get
Complete drop-in unit; no risk of a mismatched seal; often more cost-effective than sourcing a standalone lens
Aftermarket Performance Lens
Best for
Drivers upgrading to projector-style or LED-optimized fog lights at the same time
What you get
Redesigned optic for improved beam spread; may require wiring or bracket modification depending on Volvo 760 fitment

Replacing fog light lenses on a Volvo 760

Easy⏱ 30–60 minutes per sideFlathead and Phillips screwdriversTrim panel removal pry toolSocket and ratchet setSilicone sealant or butyl tape (if re-sealing a housing)

On most Volvo 760 configurations, the fog light lens or assembly is accessed from the front bumper fascia and secured with a few screws or twist-lock clips — no special equipment required. Disconnect the bulb harness, remove the fasteners, swap the lens or assembly, and reconnect. If your replacement lens requires re-sealing to the housing, apply a thin, continuous bead of automotive silicone and allow it to cure fully before reinstalling.

Frequently asked questions

How much does it cost to replace fog light lenses on a Volvo 760?
Fog light lens replacements for the Volvo 760 start at low prices for a single side. A complete lens-plus-housing assembly costs more. Professional installation typically adds one to two hours of labor. DIY replacement is straightforward on most vehicles and can bring total cost close to the part price alone.
Can I replace just the fog light lens, or do I need the whole assembly on my Volvo 760?
It depends on how the Volvo 760 fog light is built. Some units use a separately replaceable snap-in or screwed-in lens cover. Others bond the lens permanently to the housing during manufacturing. If the lens is bonded, you'll need to replace the full assembly. Check your existing fog light before purchasing a lens-only part.
Will a cracked fog light lens cause my Volvo 760 to fail inspection?
Yes, in most states a cracked, broken, or non-functioning fog light lens can result in a failed safety inspection. Even where fog lights are not mandatory equipment, inspectors typically flag any installed light that is visibly damaged or non-functional. Replacing the lens before your inspection date is the straightforward fix.
Can I polish a yellowed fog light lens instead of replacing it on my Volvo 760?
Light surface oxidation can often be restored with a polishing kit, buying another year or two of clarity. However, if the lens is deeply yellowed through its full thickness, cracked, melted, or has failed internally, polishing will not restore beam quality or seal integrity. Replacement is the only lasting solution in those cases.
Why does my Volvo 760 fog light keep fogging up inside after I replaced the lens?
Internal condensation after a lens replacement almost always means the new lens is not fully sealed against the housing. Check that all clips, screws, and the perimeter gasket or sealant bead are properly seated. A small gap lets moist air in; heat from the bulb then condenses it on the cooler lens interior.
Are aftermarket fog light lenses as good as OEM on a Volvo 760?
Quality varies by brand. Reputable aftermarket lenses from established suppliers in our top OE-quality brands lineup are manufactured to match OEM dimensions and UV-resistant material specs, making them functionally equivalent. Budget-tier lenses may use thinner plastic that yellows or cracks faster. Stick to brands with a direct-fit guarantee for your Volvo 760 to avoid fitment issues.

More parts for your Volvo 760

Spark Plug Wire SetAlternator Bracket BushingElectric Fuel PumpFog Light RelayRadiator Coolant HoseStrut BellowsStabilizer Bar Link BushingFog Light

Fog light lens for other Volvo models

Volvo GLEVolvo 264Volvo 265Volvo 240Volvo DLVolvo 242