Loading...

Volvo S70 Suspension Strut Spacers

Volvo S70 Suspension strut spacers

Suspension strut spacers for your Volvo S70 start at low prices, with multiple options in stock from top OE-quality brands. A strut spacer sits between the strut mount and the vehicle body to add lift height without replacing the entire strut assembly. When spacers crack, collapse, or are missing after a lift kit install, ride height drops unevenly and handling becomes unpredictable.

Signs your Volvo S70 needs new suspension strut spacers

  • Ride height is visibly lower on one side than the other, even after a recent lift kit installation
  • Clunking or popping noise from the front or rear suspension when turning or hitting bumps, caused by a cracked or loose spacer shifting under load
  • Uneven or accelerated tire wear across the tread, indicating the suspension geometry is no longer sitting at the correct angle
  • Steering pulls consistently to one side without road-crown explanation, pointing to unequal strut height between left and right
  • Vibration through the steering wheel or floorboard at highway speeds that wasn't present before, often from a spacer that has compressed unevenly
  • Visual inspection reveals cracks, deformation, or crumbling material on the spacer itself, especially common with polyurethane units exposed to heat and road salt

Which suspension strut spacer should you buy for your Volvo S70?

The main decisions are lift height, material, and whether you need a leveling spacer or a full lift spacer. Lift height directly affects suspension geometry, so match the spacer to your intended use — mild leveling or significant off-road lift. Material determines durability: cheaper units compress over time, while billet aluminum holds its dimension indefinitely.

Polyurethane leveling spacer (0.5"–1.5")
Best for
Daily drivers wanting a subtle front-end level with low cost
What you get
Lightweight, corrosion-resistant, absorbs minor vibration; can compress slightly over years
Billet aluminum leveling spacer (1"–2.5")
Best for
Drivers who want a permanent, dimensionally stable lift with no long-term settling
What you get
CNC-machined precision, anodized finish, no compression over time; slightly higher price
Strut extension spacer / full lift spacer (2"–3"+)
Best for
Off-road builds or trucks needing significant front lift to clear larger tires
What you get
Maintains factory strut travel, requires alignment afterward; paired with rear blocks for level stance
Coilover conversion spacer / hat spacer
Best for
Performance or track builds converting to coilover suspension or reusing OEM struts at a new height
What you get
Allows fine-tuned ride height adjustment; requires correct fitment to strut mount bolt pattern for Volvo S70

Replacing suspension strut spacers on a Volvo S70

Moderate2–3 hoursFloor jack and jack standsSocket set and torque wrenchSpring compressor (if removing the strut from the spring)Pry bar or strut spreaderPenetrating oil for corroded hardware

Installing strut spacers on a Volvo S70 requires safely lifting and supporting the vehicle, removing the wheel, and unbolting the strut from the mount so the spacer can be seated between the mount and the body or strut tower. The strut assembly is then reinstalled and all fasteners tightened to the manufacturer's specification using a torque wrench. A professional four-wheel alignment must be performed after installation to restore correct suspension geometry.

Frequently asked questions

How much does it cost to replace suspension strut spacers on a Volvo S70?
Parts start at low prices for a Volvo S70 strut spacer. A full set typically runs $40–$200 depending on material and lift height. Professional installation adds $80–$200 in labor per axle. A post-installation wheel alignment is strongly recommended and usually costs an additional $80–$150.
Do strut spacers affect the ride quality on a Volvo S70?
Yes, but the degree depends on spacer height and material. Small leveling spacers (under 1.5") have minimal impact on ride quality. Larger spacers change strut angle and suspension geometry, which can make the ride stiffer or alter handling. Billet aluminum spacers do not absorb vibration the way polyurethane units do, so harshness can increase slightly.
Do I need a wheel alignment after installing strut spacers on a Volvo S70?
Yes. Any change in strut height alters camber and caster angles on the Volvo S70. Skipping an alignment after spacer installation leads to accelerated and uneven tire wear, pulling during straight-line driving, and compromised handling. Budget for a four-wheel alignment immediately after the spacers are installed.
Are strut spacers safe for daily driving on a Volvo S70?
Quality billet aluminum or heavy-duty polyurethane spacers within the manufacturer's recommended lift range are considered safe for daily use on a Volvo S70. Exceeding the recommended height for your specific strut design overstresses strut bearings and CV axles. Always choose spacers engineered specifically for the Volvo S70's strut mount bolt pattern and diameter.
How long do suspension strut spacers last on a Volvo S70?
Billet aluminum spacers are essentially indefinite in lifespan if not physically damaged — they do not compress or degrade. Polyurethane spacers typically last several years but can dry-crack or compress in regions with extreme heat, cold, or road salt exposure. Inspect them whenever tires are rotated or the vehicle is on a lift.
Will strut spacers void the warranty on my Volvo S70?
In the United States, the Magnuson-Moss Warranty Act prevents a dealer from voiding your entire factory warranty solely because you added strut spacers. However, the dealer can deny warranty claims on components directly damaged by the spacers — such as strut bearings, CV axles, or alignment-related tire wear. Check your Volvo S70 warranty terms before modifying.

More parts for your Volvo S70

Suspension strut spacers for other Volvo models