Loading...
Wiper blades for your Workhorse Fastrack Ft1460 start at $2.95, and AutoBuffy stocks 13 options from Bosch and ACDelco. Wiper blades sweep rain, snow, and debris off your windshield to keep your line of sight clear. When they fail, you get streaking, skipping, or outright smearing that can make driving in wet conditions genuinely dangerous.
The main decision is blade style: traditional framed, beam (bracketless), and hybrid each suit different climates and budgets. You also need to confirm the correct driver-side and passenger-side lengths for your Workhorse Fastrack Ft1460, as the two are almost never the same size. Rear wiper blades, where applicable, are sold separately and use a different attachment style.
| Option | Best for | What you get |
|---|---|---|
| Traditional framed blade | Dry or mild climates, budget replacement | Steel frame holds rubber refill against glass; widely available and lowest cost, but snow and ice can pack into the frame |
| Beam (bracketless) blade | All-weather use, modern vehicles | One-piece tension-curved design with no exposed frame; maintains even pressure across the full arc and resists ice buildup |
| Hybrid blade | Mixed climates, drivers who want durability | Hard plastic shell over an internal beam frame; combines the all-weather contact of a beam with physical protection against UV and road grime |
| Rear wiper blade | Vehicles with a rear wiper (SUVs, wagons, hatchbacks) | Shorter blade sized for rear glass; uses a dedicated pin or hook adapter — verify fitment separately from front blades |
Lift the wiper arm away from the glass, press or slide the release tab at the center of the blade, and slide the old blade off the hook arm. Align the new blade's connector with the arm hook, push or click it into place until it seats firmly, then lower the arm gently back onto the glass. Before finishing, wipe the windshield with washer fluid and run the wipers to confirm the new blade makes full, streak-free contact across the entire sweep arc.