Loading...

Jaguar Xkr S Engine Cooling Fan Assemblys

Jaguar Xkr S Engine cooling fan assemblys

Starting at low prices, AutoBuffy stocks multiple engine cooling fan assemblies from top OE-quality brands. The cooling fan assembly pulls air through the radiator and condenser to prevent the engine from overheating, especially at low speeds and idle. When it fails, coolant temperatures spike, the A/C weakens, and you risk warped heads or a blown gasket if ignored.

Signs your Jaguar Xkr S needs a new engine cooling fan assembly

  • Temperature gauge climbs into the red at idle or in slow traffic but drops back to normal at highway speeds
  • Cooling fan does not spin when the A/C is switched on or when the engine reaches normal operating temperature
  • Fan runs continuously at full speed from startup, even when the engine is cold
  • Loud grinding, rattling, or buzzing noise coming from behind the radiator while the engine is running
  • A/C blows noticeably less cold at idle or in stop-and-go driving than at highway speeds
  • Check Engine or cooling system warning light is on, often accompanied by a fan motor or fan control module fault code

Which engine cooling fan assembly should you buy for your Jaguar Xkr S?

Most modern Jaguar Xkr S models use an electric fan assembly that combines the motor, blade, and shroud into a single bolt-in unit — so matching the connector type, blade diameter, and motor speed configuration is critical. The main decision is whether to choose an OE-equivalent direct fit, an upgraded high-performance unit, or a replacement motor-only kit if your shroud is undamaged.

OE Direct-Fit Assembly
Best for
Daily drivers who want a straightforward, hassle-free swap
What you get
Matched motor speed, blade pitch, and plug-and-play connector; restores factory cooling performance
OE-Style Assembly with Upgraded Motor
Best for
High-mileage vehicles or those prone to repeat overheating at idle
What you get
Higher CFM airflow than the original, same bolt pattern and harness, longer motor service life
Dual-Fan Assembly
Best for
Vehicles equipped with both a primary radiator fan and a separate condenser fan as a combined unit
What you get
Both fans replaced at once, eliminates the risk of the second motor failing shortly after the first
Replacement Fan Motor Only
Best for
When the shroud and blades are intact and undamaged
What you get
Lower cost repair that reuses the existing shroud; requires confirming shaft diameter and rotation direction

Replacing an engine cooling fan assembly on a Jaguar Xkr S

Moderate⏱ 1–2 hoursSocket set with extensionsFlathead and Phillips screwdriversTrim clip removal toolNeedle-nose pliersDrain pan (if partial coolant drain is needed)

On most Jaguar Xkr S configurations the upper radiator hose, air intake duct, and any wiring harness clips must be moved aside before the fan shroud bolts can be accessed. The assembly then lifts straight out once the mounting bolts and electrical connector are released. Fasteners should be snugged to a firm but not excessive torque, and all harness clips and locking tabs must be fully seated before starting the engine.

Frequently asked questions

How much does it cost to replace engine cooling fan assemblies on a Jaguar Xkr S?
Parts start at low prices on AutoBuffy. A complete electric fan assembly is typically a moderate DIY job, so many owners save significantly on labor by doing it themselves. Shop labor, when added, generally runs one to two hours depending on how accessible the fan is on the Jaguar Xkr S.
Can I drive my Jaguar Xkr S with a broken cooling fan assembly?
You should not drive the Jaguar Xkr S with a failed cooling fan any further than necessary. At highway speeds airflow through the grille may keep temperatures stable, but any stop-and-go driving or idling risks rapid overheating. Sustained overheating can cause head gasket failure or warped cylinder heads — repairs that far exceed the cost of a new fan assembly.
Will a bad cooling fan assembly affect the A/C on my Jaguar Xkr S?
Yes. On the Jaguar Xkr S the electric cooling fan also pulls air across the A/C condenser. A slow or non-functioning fan reduces the condenser's ability to shed heat, causing refrigerant pressure to rise and compressor efficiency to drop. The result is noticeably warmer air from the vents, especially at idle or low speeds.
How do I know if the fan motor or the fan control module is the problem on my Jaguar Xkr S?
Apply direct 12-volt power to the fan motor connector with a jumper wire. If the fan spins normally, the motor is good and the fault likely lies in the fan control module, relay, or temperature sensor. If the fan does not spin or runs rough, the motor assembly itself needs replacement. Scan for fault codes first to narrow it down quickly.
How long does an engine cooling fan assembly last on a Jaguar Xkr S?
On most vehicles an electric cooling fan assembly lasts somewhere between 80,000 and 150,000 miles, though road debris, moisture intrusion, and bearing wear can shorten that range considerably. Heat-soaked engine bays, frequent idling in traffic, and towing accelerate motor brush and bearing wear on the Jaguar Xkr S.
Do I need to replace the entire assembly, or just the fan blade on my Jaguar Xkr S?
If only a blade is cracked or broken and the motor runs smoothly and quietly, replacing the blade alone is reasonable. However, complete assemblies are often comparably priced and ensure the motor, bearings, and shroud are all fresh. If the motor is noisy, slow, or intermittent, always replace the full assembly rather than just the blade.

Engine cooling fan assemblys for other Jaguar models

Jaguar XKRJaguar XKJaguar XJJaguar XKR-SJaguar X-TypeJaguar XJR575