Loading...
Engine camshaft bearings for your Chevrolet C30 start at $13.95, with 1 options in stock from Cloyes. These precision sleeve bearings support the camshaft as it rotates inside the engine block or head, controlling valve timing. When they wear or fail, oil pressure drops and the camshaft can score, leading to expensive internal engine damage if ignored.
Camshaft bearings are sold as complete sets sized to specific journal positions, so the most important buying decision is matching the correct inside diameter and width to each journal location in your engine. Material grade and wall thickness also matter — a worn block may need a thicker-wall oversized bearing to restore proper oil clearance. Always confirm whether your engine uses in-block or overhead-cam bearings, as the design differs significantly.
| Option | Best for | What you get |
|---|---|---|
| Standard-size OE replacement set | Engines with unworn, on-spec journal bores | Bearings matching factory inside diameter and wall thickness for correct oil clearance out of the box |
| Oversized (thicker-wall) set | Engines with slightly worn or line-bored cam bores | Extra wall material that restores proper clearance without requiring a new block or head casting |
| Performance tri-metal bearing set | High-revving, high-load, or rebuilt performance engines | Copper-lead-tin tri-metal construction that handles higher surface speeds and oil film pressure than standard bimetal bearings |
| Individual position bearings | Replacing one damaged journal location without full engine teardown | Single bearing sized to a specific journal number so you avoid buying a full set when only one position has failed |
Camshaft bearing replacement requires removing the camshaft entirely, which on most engines means pulling the intake manifold, timing components, and in many cases the engine from the vehicle. Each bearing must be driven out carefully and the new bearing driven in to the correct depth with the oil hole aligned precisely to the feed passage in the block or head. After installation, oil clearance should be verified with Plastigage before final reassembly to confirm the correct fit.