Loading...

Chevrolet Citation Ii Multi-Purpose Switchs

Chevrolet Citation Ii Multi-purpose switchs

Starting at $54.95, AutoBuffy stocks 1 multi-purpose switches for the Chevrolet Citation Ii from brands including Standard Ignition. The multi-purpose switch combines turn signal, headlight, wiper, and sometimes cruise control functions into a single stalk-mounted unit on the steering column. When it fails, you may lose the ability to signal turns, operate wipers, or switch headlight modes — creating real safety and legal hazards.

Signs your Chevrolet Citation Ii needs a new multi-purpose switch

  • Turn signals stop self-canceling after a turn or fail to activate at all
  • Headlights won't switch between high and low beam, or the flash-to-pass function stops working
  • Windshield wipers operate at only one speed, stay on constantly, or don't respond at all
  • Cruise control cannot be set, resumed, or cancelled from the stalk
  • Intermittent wiper delay setting no longer adjusts or jumps erratically
  • Dashboard warning lights related to the lighting system illuminate without an obvious cause

Which multi-purpose switch should you buy for your Chevrolet Citation Ii?

The most important decision is whether to choose an OEM-equivalent replacement or an aftermarket unit, and whether the switch includes all the function clusters your Chevrolet Citation Ii originally came with. Some Citation Ii trims combine turn signal and wiper controls in one stalk while others add cruise control or auto-headlight logic — confirm your original switch's function count before ordering.

OEM-Equivalent (Turn Signal + Headlight Stalk)
Best for
Owners who want a direct, plug-and-play fit with original feel
What you get
Exact connector, cancel cam geometry, and beam-switch detents matching factory spec
OEM-Equivalent with Integrated Wiper Control
Best for
Vehicles where both functions share one stalk assembly
What you get
Single-unit replacement covering intermittent, low, high wiper speeds plus signal and beam functions
Full-Function Switch (Signal + Wiper + Cruise)
Best for
Higher-trim Citation Ii variants that bundle all controls in one assembly
What you get
Complete stalk with cruise set/resume/cancel buttons and all lighting functions included
Remanufactured / Refurbished Unit
Best for
Budget-focused owners comfortable with a rebuilt part
What you get
Cleaned, tested, and rebuilt OEM switch at a lower price; may carry a limited warranty

Multi-purpose switchs brands we stock for your Chevrolet Citation Ii

Standard Ignition
1 option · from $54.95

Replacing the multi-purpose switch on a Chevrolet Citation Ii

Moderate1–2 hoursTrim panel removal tool or flat pry toolPhillips and flathead screwdriversTorx or hex bit setElectrical contact cleanerMultimeter (optional, for circuit verification)

Disconnect the battery and allow several minutes for any airbag capacitor to discharge before working near the steering column. Remove the upper and lower column shroud panels to expose the switch mounting screws, disconnect the wiring harness connectors, and swap in the new unit by reversing the process. Reconnect the battery and test all switch functions — signals, wipers, high beam, and cruise — before returning the vehicle to service.

Frequently asked questions

How much does it cost to replace multi-purpose switches on a Chevrolet Citation Ii?
Parts start at $54.95 for the Chevrolet Citation Ii at AutoBuffy. A DIY swap keeps costs at the part price alone. Shop labor typically adds one to two hours of time at prevailing rates, since the stalk must be removed from the steering column and the clock spring or airbag system may need precautionary steps.
Can a bad multi-purpose switch cause the turn signals to flash at the wrong speed on a Chevrolet Citation Ii?
Yes. A worn or corroded multi-purpose switch can create increased resistance in the turn signal circuit, causing the flasher to cycle faster or slower than normal. Before replacing the switch, rule out a burned bulb — a missing bulb creates the same hyper-flash symptom. If bulbs are fine, the switch is the likely culprit.
Is it safe to drive a Chevrolet Citation Ii with a faulty multi-purpose switch?
It depends on which function has failed. A non-working turn signal or inoperative headlight beam selector creates an immediate safety and legal risk and should be repaired before driving. A failed wiper or cruise control stalk is less urgent in dry conditions but still needs prompt attention before adverse weather.
Will I need to reprogram or relearn anything after replacing the multi-purpose switch on a Chevrolet Citation Ii?
In most cases, no programming is required — the switch is a passive electrical component. However, on some Chevrolet models the steering angle sensor or driver-assist systems store calibration data in adjacent modules. It is worth scanning for fault codes after the repair to confirm all systems recognize the new switch correctly.
How do I know if my Chevrolet Citation Ii has one stalk or two separate stalks?
Check the left side of your steering column with the engine off. A single long stalk handles both turn signals and wipers; two shorter stalks mean the functions are split. Match your original configuration when ordering — installing a combined-function switch where two separate ones belong requires wiring that the Citation Ii harness may not support.
How long does a multi-purpose switch typically last on a Chevrolet Citation Ii?
Most multi-purpose switches last well over a hundred thousand miles under normal use. Premature failure is usually caused by water intrusion near the column, excessive force on the stalk, or heat cycling that degrades the internal contact wafers. Vehicles in humid climates or with a history of windshield leaks tend to wear switches faster.

Shop multi-purpose switchs by year for the Chevrolet Citation Ii

More parts for your Chevrolet Citation Ii

Multi-purpose switchs for other Chevrolet models