Loading...
Starting at $116.95, AutoBuffy stocks 1 A/C condenser fan motors from Four Seasons to fit your Chevrolet P6000. The condenser fan pulls air through the condenser to dissipate heat from the refrigerant — when it fails, the system loses cooling capacity and can cause the compressor to overheat and shut down, leaving you with warm air even on a charged system.
The most important decisions are matching the motor's rotation direction, blade pitch, and connector configuration to your Chevrolet P6000's original setup — a motor that spins the wrong way will push air instead of pull it, gutting cooling performance. Some Chevrolet P6000 applications use a dual-fan shroud with separate motors for the condenser and radiator, so confirm which position you need before ordering.
| Option | Best for | What you get |
|---|---|---|
| OE-Replacement Motor Only | DIY mechanics reusing the existing fan blade and shroud | Drop-in motor matched to original specs; lowest cost; requires transferring your blade |
| Motor + Fan Blade Assembly | Blades that are cracked, warped, or out of balance | Pre-balanced unit; reduces vibration noise; slightly higher cost but faster install |
| Complete Fan Module (motor, blade, shroud) | High-mileage vehicles or when shroud is damaged | Fully plug-and-play assembly; eliminates fitment guesswork; highest upfront cost, lowest labor time |
| High-Output / Performance Motor | Hot climates, towing applications, or modified vehicles with upgraded condensers | Higher CFM rating for demanding cooling loads; may require wiring check for amperage draw |
Disconnect the battery, then unplug the fan motor connector and remove the mounting bolts securing the shroud or motor bracket to the vehicle. Transfer the fan blade to the new motor if you are replacing the motor only, ensuring the blade seats fully on the shaft before tightening the retaining nut. Reinstall in reverse order, reconnect the battery, and verify the fan spins in the correct direction with the A/C on before closing up.