Loading...

Chevrolet Townsman Universal Joint U-Bolt Kits

Chevrolet Townsman Universal joint u-bolt kits

Starting at $10.95, AutoBuffy stocks 1 universal joint u-bolt kits from MOOG. A u-bolt kit secures the driveshaft U-joint to the yoke or differential flange using precision u-bolts, nuts, and retaining clips. When these fasteners loosen, crack, or corrode, the driveshaft can vibrate violently or separate entirely — a serious safety and drivetrain failure.

Signs your Chevrolet Townsman needs a new universal joint u-bolt kit

  • Clunking or banging noise from underneath the vehicle during acceleration or when shifting between drive and reverse
  • Vibration felt through the floor or seat that increases with vehicle speed, particularly at highway speeds
  • Visible rust, cracks, or deformation on the u-bolts when inspecting the driveshaft connection points
  • Driveshaft appears to wobble or move laterally when the vehicle is on a lift and the driveshaft is pushed by hand
  • Loose or missing nuts at the driveshaft-to-yoke connection, sometimes accompanied by a rattling sound at low speeds
  • Grease flung onto the undercarriage or floor near the U-joint, indicating the joint cap has shifted due to fastener failure

Which universal joint u-bolt kit should you buy for your Chevrolet Townsman?

The right u-bolt kit depends on your driveshaft size, U-joint series, and whether you're replacing a front, rear, or mid-shaft joint. U-bolt dimensions — width, thread diameter, and leg length — must match exactly, since even a small mismatch causes improper clamping and accelerated wear. Also consider whether your application is a standard passenger vehicle, a towing rig, or an off-road build, as load ratings differ.

OEM-Equivalent Steel Kit
Best for
Daily drivers and stock restorations
What you get
Correct dimensions and grade rating for factory U-joint series; includes u-bolts, nuts, and lock washers matched to OEM specs
Heavy-Duty or High-Strength Kit
Best for
Trucks, vans, and vehicles used for towing or hauling
What you get
Higher-grade fastener steel with increased torque capacity; reduces risk of bolt stretch or fatigue under sustained load
Stainless Steel Kit
Best for
Vehicles in high-moisture or salt-belt environments
What you get
Corrosion-resistant hardware that resists rust and seizing; ideal for extended service life with minimal maintenance
Off-Road / Performance Kit
Best for
Lifted trucks, 4x4 builds, and high-angle driveshaft setups
What you get
Oversized or flanged u-bolts with reinforced retaining hardware; designed to handle driveshaft angle changes and high-torque axle outputs

Universal joint u-bolt kits brands we stock for your Chevrolet Townsman

MOOG
1 option · from $10.95

Replacing a universal joint u-bolt kit on a Chevrolet Townsman

Moderate1–2 hoursSocket set with metric and standard socketsTorque wrenchPry bar or U-joint pressPenetrating oil (for corroded hardware)Permanent marker or paint pen (for driveshaft indexing)

Before removing any hardware, mark the driveshaft's relationship to the yoke or differential flange so it can be reinstalled in the same position. Remove the old u-bolts and press or tap the U-joint caps free, then seat the new U-joint and secure it with the new u-bolt kit, tightening the fasteners evenly in a cross pattern to the kit manufacturer's specification. Rotate the driveshaft by hand after reassembly to confirm smooth movement and no binding before lowering the vehicle.

Frequently asked questions

How much does it cost to replace universal joint u-bolt kits on a Chevrolet Townsman?
Parts alone start at $10.95 for a Chevrolet Townsman u-bolt kit. If you're paying a shop, expect additional labor charges on top of the part cost. Many owners complete this repair at home in under two hours with basic hand tools, making it one of the more cost-effective drivetrain maintenance tasks.
Can I reuse the original u-bolts when replacing a U-joint on my Chevrolet Townsman?
Reusing old u-bolts is not recommended. Once u-bolts are torqued, the threads and steel stretch slightly. Reusing them risks under-clamping the new U-joint cap, which leads to movement, premature wear, and potential driveshaft separation. Always install a fresh kit when replacing the U-joint itself.
How do I know what u-bolt size my Chevrolet Townsman needs?
U-bolt size is determined by your driveshaft's U-joint series — commonly identified by the cap diameter and bearing span. Measure the width across the bearing caps and the distance between cap centers. Cross-reference those dimensions with the kit's listed U-joint series compatibility before ordering.
Are u-bolt kits and strap kits interchangeable on the Chevrolet Townsman?
No. Some driveshafts use u-bolt retaining hardware while others use a flat strap-and-bolt design. The type is determined by the yoke machined into your driveshaft. Installing the wrong fastener type will not properly retain the U-joint cap, creating an unsafe condition. Confirm your retaining style before purchasing.
How long do universal joint u-bolt kits last on a Chevrolet Townsman?
In normal driving conditions, quality u-bolt hardware can last the life of the U-joint itself — typically many years. Corrosion, over-torquing, or repeated off-road stress can shorten that significantly. Inspecting u-bolts for rust, cracking, or looseness at every U-joint service interval is good practice.
Do I need to balance the driveshaft after replacing the u-bolt kit on my Chevrolet Townsman?
Replacing only the u-bolt hardware typically does not require rebalancing, provided the U-joint and driveshaft are reinstalled in the same indexed position. Mark the driveshaft orientation before disassembly. If the driveshaft was removed, dropped, or a new U-joint was installed, a balance check is advisable to eliminate vibration.

Shop universal joint u-bolt kits by year for the Chevrolet Townsman

More parts for your Chevrolet Townsman

Universal joint u-bolt kits for other Chevrolet models