Loading...

Chevrolet Tracker Suspension Stabilizer Bar Link Bushing Kits

Chevrolet Tracker Suspension stabilizer bar link bushing kits

Starting at $7.95, AutoBuffy stocks 1 suspension stabilizer bar link bushing kits from Delphi. These rubber or polyurethane bushings cushion the connection between the sway bar and its end links, absorbing vibration and controlling body roll. When they crack or collapse, handling becomes vague and cornering feels loose — a safety concern worth addressing promptly.

Signs your Chevrolet Tracker needs new stabilizer bar link bushings

  • Clunking or knocking noise from the front or rear suspension when turning, hitting bumps, or driving over uneven pavement
  • Excessive body roll or lean during cornering that feels noticeably worse than normal
  • Vague or loose steering feel, particularly when changing lanes or navigating curves
  • Rattling or squeaking from the suspension that increases in cold weather as worn rubber stiffens
  • Visible cracking, tearing, or complete separation of the bushing material on inspection
  • Uneven or accelerated tire wear caused by the sway bar failing to keep the suspension geometry stable

Which stabilizer bar link bushing kit should you buy for your Chevrolet Tracker?

The primary decision is bushing material — rubber vs. polyurethane — since each trades comfort for performance differently. You also need to confirm whether the kit covers the front bar, rear bar, or both, and whether it includes the bracket hardware that clamps the sway bar to the frame.

OEM-Replacement Rubber
Best for
Daily drivers, comfort-focused owners
What you get
Factory-matched softness, quiet ride, direct bolt-on fit with no modification needed
Polyurethane (Street)
Best for
Enthusiast drivers, spirited street use
What you get
Firmer feel, reduced body roll, longer lifespan than rubber but may transmit more NVH
Polyurethane (Performance/Racing)
Best for
Track days, autocross, high-load use
What you get
Maximum stiffness and roll resistance, greaseable design, requires periodic maintenance
Complete Kit (Bushings + Brackets)
Best for
High-mileage vehicles, full-service repairs
What you get
Replaces all worn hardware at once, reduces the chance of returning noise from adjacent worn parts

Suspension stabilizer bar link bushing kits brands we stock for your Chevrolet Tracker

Delphi
1 option · from $7.95

Replacing stabilizer bar link bushings on a Chevrolet Tracker

Easy⏱ 1–2 hoursFloor jack and jack standsSocket set and ratchetCombination wrench setPry bar or bushing removal toolSilicone or polyurethane-compatible grease (if installing poly bushings)

Raise and safely support the vehicle, then locate the sway bar mounting brackets on the frame or subframe and unbolt them to free the old bushings. Press or pull the worn bushings out, clean the sway bar contact surface, and seat the new bushings before reinstalling the brackets and snugging the fasteners to specification. If installing polyurethane bushings, apply the supplied or recommended grease to the inner bore before assembly to prevent squeaking.

Frequently asked questions

How much does it cost to replace stabilizer bar link bushing kits on a Chevrolet Tracker?
Parts alone start at $7.95 on AutoBuffy. If you have a shop install them, expect additional labor charges on top of the part cost. Replacing bushings yourself is straightforward and can cut total costs significantly, since the job typically requires basic hand tools and about one to two hours.
How long do stabilizer bar link bushings last on a Chevrolet Tracker?
Rubber bushings generally last anywhere from 50,000 to 100,000 miles depending on road conditions, climate, and driving style. Vehicles driven on rough roads or in extreme cold tend to wear bushings faster. Polyurethane bushings often outlast rubber but require periodic greasing to prevent squeaking.
Can I drive my Chevrolet Tracker with worn stabilizer bar link bushings?
You can drive short distances, but it is not advisable. Worn bushings allow the sway bar to shift position, reducing the vehicle's ability to resist body roll during cornering. This directly affects handling predictability and can accelerate wear on adjacent suspension components, including the end links and sway bar itself.
Do I need to replace the stabilizer bar end links at the same time?
It is strongly recommended. End links and their bushings wear at similar rates since they work together as part of the same system. Replacing both at the same time avoids a return trip under the vehicle, and most technicians consider it standard practice to service the entire sway bar assembly together.
Will replacing stabilizer bar link bushings fix the clunking noise on my Chevrolet Tracker?
If the clunk happens over bumps, during turns, or when rocking the vehicle side to side, worn sway bar bushings are a likely cause. However, clunking can also come from worn end links, ball joints, or control arm bushings. Inspect all related components before purchasing to confirm the correct source of the noise.
Do I need to align my Chevrolet Tracker after replacing stabilizer bar link bushings?
A wheel alignment is generally not required after replacing sway bar link bushings alone, since they do not alter the vehicle's alignment angles. However, if the suspension was disturbed significantly during the repair or other components were replaced at the same time, having the alignment checked is a reasonable precaution.

Shop suspension stabilizer bar link bushing kits by year for the Chevrolet Tracker

199119901989

More parts for your Chevrolet Tracker

Bare StrutMulti-Function SwitchHVAC Pressure SwitchVapor Canister Purge ValveSuspension Self-Leveling Sensor ConnectorExhaust Pipe Flange GasketIgnition Coil ConnectorPCV Valve Elbow

Suspension stabilizer bar link bushing kits for other Chevrolet models

Chevrolet MetroChevrolet Sprint