Loading...
Starting at $12.95, AutoBuffy stocks 1 back up light connectors from SKP for your Chevrolet V10. This connector is the wiring harness plug that delivers power and ground to the reverse light bulb socket. When it fails, your reverse lights go dark, eliminating the white-light warning to pedestrians and other drivers behind you — a real safety and legal concern.
The main decision is whether you need a direct OE-style replacement plug-and-play connector or a repair-grade pigtail you solder or crimp into the existing harness. Fit is critical — terminal count, locking tab style, and wire gauge must match your Chevrolet V10's factory harness to avoid a loose connection or future corrosion.
| Option | Best for | What you get |
|---|---|---|
| OE-Style Replacement Pigtail | Daily drivers needing a reliable, exact-fit swap | Factory-matched connector housing, pre-attached lead wires, correct terminal count and locking tab — plug in and go |
| Weatherproof Sealed Connector | Vehicles in wet climates or with repeated moisture intrusion at the taillight | Gasket-sealed housing and tinned terminals that resist corrosion longer than standard open connectors |
| Universal Repair Connector | Budget repairs or when an exact-fit pigtail is unavailable | Generic housing and terminals you size and crimp yourself; requires more labor and careful terminal matching |
| Complete Taillight Wiring Harness Section | Vehicles with widespread harness damage beyond a single connector | Longer wiring run that replaces the connector plus degraded wire upstream, eliminating multiple splice points |
Access the back up light assembly from inside the cargo area or trunk, remove any trim panels, and unplug the faulty connector from the bulb socket and harness. Cut the old connector from the wiring, strip the lead wires, and splice the new pigtail connector in using heat-shrink butt connectors or soldered joints sealed with heat-shrink tubing. Reconnect the harness plug, test the reverse lights before reinstalling trim, and confirm a solid locking connection with no exposed wire.