Loading...
Turn signal repair kits for your Chevrolet Vega start at $23.95. AutoBuffy stocks 3 kits from Standard Ignition. A turn signal repair kit replaces the failed electrical contacts, wiring harness connectors, or bulb sockets that cause your directional signals to stop flashing, flash erratically, or trigger a fast-blink hyperflash warning — restoring legal, safe signaling.
Turn signal repair kits are not all the same — they target different failure points in the circuit. Identify whether your problem is at the bulb socket, the wiring pigtail connector, the multifunction switch contacts, or the flasher relay before choosing a kit. Buying the correct kit for your specific failure saves time and avoids repeat repairs.
| Option | Best for | What you get |
|---|---|---|
| Bulb Socket & Pigtail Kit | Corroded or melted socket at the lamp housing | Replacement bulb socket, pre-attached wiring pigtail, and heat-shrink connectors for a solder-free splice |
| Wiring Harness Connector Kit | Burnt or broken connector pins in the turn signal harness | OEM-style connector housing, pre-crimped terminals, seal plugs, and terminal removal tools |
| Multifunction Switch Contact Kit | Internal contact wear causing signal cancellation or no activation | Replacement contact disc or spring plate, switch lubricant, and small hardware for reassembly |
| Complete Turn Signal Repair Kit (Combo) | Unknown failure point or multiple worn components at once | Bulb sockets, pigtail connectors, flasher relay, terminals, and splicing hardware in one box |
Begin by using a multimeter to confirm which part of the circuit has failed — socket, pigtail, connector, or relay — so you install only what is needed. Disconnect the battery before cutting or splicing any wiring, then follow the kit instructions to crimp and seal each connection before reassembling the lamp housing. Reconnect the battery and test all four corners of the turn signal circuit before closing up the vehicle.