Loading...

Chevrolet Venture Suspension Stabilizer Bar Assemblys

Chevrolet Venture Suspension stabilizer bar assemblys

Suspension stabilizer bar assemblies for the Chevrolet Venture start at $144.95, with 2 options in stock from SKP and Dorman. The stabilizer bar assembly connects both sides of the suspension to resist body roll during cornering. When it wears out, handling becomes vague and the vehicle leans excessively in turns, increasing rollover risk and uneven tire wear.

Signs your Chevrolet Venture needs a new suspension stabilizer bar assembly

  • Pronounced body roll or leaning during turns, even at moderate speeds
  • Clunking or knocking noise from the front or rear suspension over bumps or during steering input
  • Loose or wandering steering feel, especially when changing lanes
  • Uneven or accelerated tire wear on one side of an axle
  • Visible cracks, bends, or corrosion on the bar itself during a visual inspection
  • End links or bushings appear torn, missing, or separated from the bar mounting points

Which suspension stabilizer bar assembly should you buy for your Chevrolet Venture?

The most important decision is whether you need the complete assembly — bar, end links, and bushings — or just the bar itself. Position (front vs. rear) is also critical since bars differ in diameter, shape, and mounting hardware. Upgrading bar diameter can meaningfully reduce body roll over OE spec, while a direct OE-replacement bar restores factory handling.

OE-Replacement Bar Only
Best for
Drivers replacing a bent or broken bar with intact hardware
What you get
Factory diameter and shape; requires reuse of existing end links and bushings
Complete Assembly (Bar + End Links + Bushings)
Best for
High-mileage vehicles where all hardware is worn; best value for full restoration
What you get
Everything needed for a complete job; eliminates mismatched wear between components
Performance / Larger Diameter Upgrade
Best for
Drivers wanting reduced body roll and sharper cornering response
What you get
Stiffer bar with increased diameter; may stiffen ride slightly on rough surfaces
Rear Stabilizer Bar Assembly
Best for
Vehicles with independent rear suspension showing rear-end float or rear tire wear
What you get
Rear-specific geometry; often overlooked but critical for balanced handling

Suspension stabilizer bar assemblys brands we stock for your Chevrolet Venture

SKP
1 option · from $145.95
Dorman
1 option · from $144.95

Replacing the suspension stabilizer bar assembly on a Chevrolet Venture

Moderate⏱ 1–2 hoursFloor jack and jack standsSocket set and ratchet (metric and standard)Torque wrenchPenetrating oil (for corroded fasteners)Pry bar or trim tool (for bushing removal)

Raise and safely support the Chevrolet Venture, then remove the end link nuts at both sides and unbolt the bushing brackets from the subframe or crossmember to free the bar. Installation is the reverse process — seat the bushings correctly in their brackets, torque all fasteners to the manufacturer's specification in the service manual for your Chevrolet Venture, and lower the vehicle before final checks. Test drive and listen for any remaining noise before considering the job complete.

Frequently asked questions

How much does it cost to replace suspension stabilizer bar assemblies on a Chevrolet Venture?
Parts for the Chevrolet Venture start at $144.95. A complete front or rear stabilizer bar assembly with end links and bushings will typically cost more than the bar alone. Factor in shop labor of one to two hours if you are not doing the work yourself, which can add significantly to the total.
Can I drive my Chevrolet Venture with a bad stabilizer bar assembly?
Short distances at low speed are possible, but it is not safe to drive normally. A failed stabilizer bar assembly allows excessive body roll, reduces your ability to control the Chevrolet Venture during emergency maneuvers, and accelerates tire wear. The longer it is ignored, the more likely secondary suspension components will also wear prematurely.
What is the difference between a stabilizer bar and a sway bar on a Chevrolet Venture?
They are the same component. Stabilizer bar, sway bar, and anti-roll bar all refer to the same torsional spring that links the left and right suspension on a given axle. The term varies by manufacturer and region. When shopping for the Chevrolet Venture, either search term will return the correct part.
How long does a stabilizer bar assembly last on a Chevrolet Venture?
The bar itself is durable and can last the life of the vehicle. The bushings and end links that are part of the assembly typically wear out first, often within several years or tens of thousands of miles depending on road conditions. Replacing the full assembly at once prevents callbacks and restores handling completely.
Does replacing the stabilizer bar assembly require an alignment on a Chevrolet Venture?
In most cases, no. The stabilizer bar assembly does not directly set wheel angles, so a standard bar swap does not change alignment. However, if the replacement involves disturbing other suspension components or if the vehicle already had alignment issues, it is a good idea to verify alignment after the repair.
How do I know if I need to replace the full assembly or just the end links and bushings on my Chevrolet Venture?
Inspect the bar itself for bends, cracks, or corrosion. If the bar is straight and undamaged, replacing only the end links and bushings is often sufficient and less expensive. If the bar is deformed, cracked, or heavily rusted, a complete assembly replacement ensures all components are matched and in new condition.

Shop suspension stabilizer bar assemblys by year for the Chevrolet Venture

200520042003200220012000199919981997

More parts for your Chevrolet Venture

Engine Camshaft Position Sensor ConnectorFuel Pump ConnectorEngine Coolant Temperature SensorClutch Pedal Position Switch ConnectorEngine Oil Drain Plug GasketIgnition Knock (Detonation) SensorSerpentine Belt Drive Component KitControl Arm Kit

Suspension stabilizer bar assemblys for other Chevrolet models

Chevrolet Impala LimitedChevrolet Monte CarloChevrolet Impala