AutoBuffy
Call To Order

Loading...

Ford Bronco Engine Timing Sets

Ford Bronco Engine timing sets

Starting at $18.95, AutoBuffy stocks 30 engine timing sets for the Ford Bronco from trusted brands including Cloyes. An engine timing set synchronizes the crankshaft and camshaft so valves open and close at precisely the right moment. When it wears or fails, you risk misfires, power loss, and potentially catastrophic internal engine damage.

Signs your Ford Bronco needs a new engine timing set

  • Rattling or slapping noise from the front of the engine on cold starts that may quiet down once oil pressure builds
  • Check Engine light with misfire codes (P0300–P030x) or camshaft/crankshaft position correlation codes (P0016, P0017, P0018, P0019)
  • Rough idle or engine stumble caused by valve timing being out of phase with piston position
  • Noticeable loss of power and throttle response as incorrect valve timing reduces cylinder filling efficiency
  • Engine cranks but refuses to start, indicating the timing chain or belt has jumped a tooth or broken entirely
  • Visible metal shavings or debris in the oil during an oil change, a sign of accelerated timing component wear

Which engine timing set should you buy for your Ford Bronco?

The most important decision is matching the set to your exact engine configuration — some Ford Bronco engines use a timing chain system while others use a belt-driven setup, and the correct set must include every component needed for a complete, one-job repair. Beyond fit, choose between an OE-equivalent set for a reliable restore or an OE-brand set if you want factory-spec materials. Avoid purchasing just the chain or belt alone; worn guides, tensioners, and sprockets fail shortly after if left in place.

OE-Equivalent Master Kit
Best for
Daily drivers and budget-conscious repairs
What you get
Chain or belt, all guides, tensioners, sprockets, and gaskets in one box — everything needed for a full replacement
OEM / OE-Brand Set
Best for
Owners who want factory-spec durability and fit
What you get
Components made to the original manufacturer's material and tolerance standards; typically the highest-confidence fitment
Performance Timing Set
Best for
Modified engines or high-rpm applications
What you get
Hardened billet or double-row chain options with tighter tolerance sprockets for improved timing accuracy under stress
Chain-Only or Belt-Only
Best for
Engines with recently replaced guides and tensioners confirmed in good condition
What you get
Lower upfront cost, but requires careful inspection of every retained component — not recommended for high-mileage engines

Engine timing sets brands we stock for your Ford Bronco

Cloyes
30 options · from $18.95

Replacing an engine timing set on a Ford Bronco

Advanced⏱ 4–10 hoursHarmonic balancer pullerCamshaft and crankshaft locking/timing pin setBreaker bar and socket setTorque wrenchFront cover gasket scraper and sealant

Replacing an engine timing set requires bringing both the crankshaft and camshaft to their designated top-dead-center positions and locking them in place with the correct timing pin tools before any components are removed — skipping this step will result in incorrect valve timing reassembly. The front engine cover must be removed to access the timing components, and all gasket surfaces must be thoroughly cleaned and resealed before reassembly. Because incorrect timing can cause immediate and severe engine damage, this job is best performed by an experienced DIYer with engine-specific service procedures or a professional technician.

Frequently asked questions

How much does it cost to replace engine timing sets on a Ford Bronco?
Parts start at $18.95 for a Ford Bronco timing set at AutoBuffy. Total repair cost depends on whether your engine uses a chain or belt system and how accessible the front of the engine is. Labor is typically the largest expense, as the job often requires significant disassembly. Buying a complete kit upfront avoids costly return trips.
How long does an engine timing set last on a Ford Bronco?
Timing belt-based systems generally have a manufacturer-recommended replacement interval, often in the range of 60,000–105,000 miles. Timing chain systems are designed to last the life of the engine but can wear prematurely due to infrequent oil changes, low oil level, or using the wrong oil viscosity. Regular oil maintenance is the single biggest factor in chain longevity.
Is an engine timing set the same as a timing chain kit?
Yes, the terms are used interchangeably when the engine uses a chain. A complete timing set — whether chain or belt based — includes the drive chain or belt, camshaft and crankshaft sprockets, tensioners, and guides. Some kits also include a water pump and front cover gaskets. Always confirm what is included before purchasing.
What happens if you drive a Ford Bronco with a worn timing set?
Continuing to drive with a worn timing set risks the chain jumping a tooth or the belt snapping entirely. Either event causes immediate valve timing loss, leading to a no-start condition. On interference engines — where pistons and valves share the same cylinder space — a broken timing set can cause pistons to strike open valves, destroying the engine internally.
Can I replace just the timing chain or belt without replacing the guides and tensioners?
It is not recommended. Guides and tensioners wear at the same rate as the chain or belt. Replacing only the chain while reusing worn guides means the new chain will wear faster and the job will need to be repeated sooner. A complete kit costs only marginally more than individual components and eliminates the risk of a repeat failure.
Does replacing an engine timing set require engine removal on a Ford Bronco?
Full engine removal is rarely required but the timing set is located at the front of the engine, meaning the job typically involves removing the front engine cover, accessory belts, harmonic balancer, and sometimes engine mounts to shift the engine for clearance. On some transversely mounted engines the process is more involved. Difficulty varies significantly by engine layout.

Shop engine timing sets by year for the Ford Bronco

1996199519941993199219911990198919881987198619851984198319821981198019791978197719761975197419731972197119701969196819671966

More parts for your Ford Bronco

Fuel Pump and Strainer SetCruise Control SwitchMulti-Purpose RelayClutch Master CylinderCabin Air Temperature SensorHazard Warning and Turn Signal FlasherEngine Oil Drain PlugDistributor

Engine timing sets for other Ford models

Ford MaverickFord LTD IIFord Country SquireFord B-100Ford SableFord C600