Loading...

Ford F 800 Automatic Transmission Shift Tube Bushings

Ford F 800 Automatic transmission shift tube bushings

Starting at low prices, AutoBuffy stocks multiple automatic transmission shift tube bushings from top OE-quality brands. This small plastic or nylon sleeve centers the shift tube inside the steering column or shifter assembly, translating your gear selector movement cleanly into transmission action. When it wears out, shifter slop and missed gear engagements follow, which can leave you stuck in the wrong gear or unable to start the engine.

Signs your Ford F 800 needs a new automatic transmission shift tube bushing

  • Excessive play or looseness in the gear selector before it engages a gear
  • Shifter feels sloppy side-to-side or fore-and-aft at rest, not just during shifts
  • Difficulty moving the selector into Park, causing ignition interlock issues that prevent the key from turning or the engine from starting
  • Gear indicator on the dash or column does not align with the actual gear selected
  • Audible clunking or rattling from inside the steering column when moving the shifter
  • Vehicle rolls when selector appears to be in Park because the linkage is not fully engaging the transmission detent

Which automatic transmission shift tube bushing should you buy for your Ford F 800?

The main decision is material and whether you need the bushing alone or as part of a kit. OEM-spec nylon bushings are the most common replacement and fit the widest range of column-shift applications, but some owners in high-wear situations upgrade to a harder polymer or brass sleeve for longer service life. Always confirm whether your Ford F 800 uses a column-shift or floor-shift tube design before ordering, as the two are not interchangeable.

OEM-spec nylon bushing
Best for
Exact factory replacement on a budget
What you get
Correct interference fit and flexibility to match original shift feel
Upgraded high-density polymer bushing
Best for
High-mileage vehicles or owners who want longer service intervals
What you get
Stiffer material resists wear longer; may firm up shifter feel slightly
Brass or metal-lined bushing
Best for
Heavy-duty or fleet use where nylon fails repeatedly
What you get
Maximum durability and near-zero slop, but requires precise fit to avoid binding
Bushing and clip/retainer kit
Best for
DIY repairs where hardware is corroded or the retainer broke during removal
What you get
Includes all small pieces needed for a complete repair in one purchase

Replacing the automatic transmission shift tube bushing on a Ford F 800

Moderate⏱ 1–2 hoursTrim panel removal tool or flat screwdriver with tapePhillips and Torx screwdriver setSmall pick or dental pick for retaining clipsNeedle-nose pliersWhite lithium grease or manufacturer-recommended bushing lubricant

Remove the steering column shroud panels to expose the shift tube, then carefully release the retaining clip or snap ring that secures the worn bushing and slide or press it free from the tube. Press the new bushing into position until it seats fully, apply a light coat of lithium grease to the contact surfaces, and reassemble the column in reverse order. Before reinstalling the shroud, cycle through all gear positions to confirm the selector moves crisply and the gear indicator aligns correctly.

Frequently asked questions

How much does it cost to replace automatic transmission shift tube bushings on a Ford F 800?
The bushing itself starts at low prices at AutoBuffy, making it one of the least expensive drivetrain fixes available. DIY total cost stays close to that price. A shop will add one to two hours of labor, typically for column disassembly, which can push the total to several times the part cost depending on local labor rates.
Can I drive my Ford F 800 with a worn shift tube bushing?
Short trips may be possible, but it is not advisable. A worn bushing can prevent the shifter from fully seating in Park, allowing the vehicle to roll unexpectedly. It can also trigger the ignition interlock and leave you unable to start the engine. Address the bushing promptly to avoid being stranded or causing a safety incident.
Is replacing the shift tube bushing on a Ford F 800 a DIY job?
On most column-shift vehicles the repair requires removing the steering column shroud, disconnecting the shift tube, and pressing or snapping the new bushing into place. Mechanical experience helps, but dedicated special tools are rarely required. Plan for one to two hours and watch for fragile plastic clips that can break if forced during disassembly.
How long does a transmission shift tube bushing last on a Ford F 800?
Most original bushings last many years under normal use, but lifespan shortens considerably with frequent short trips, aggressive gear changes, or any moisture intrusion into the steering column. Vehicles with high mileage or a history of column repairs may see the bushing fail earlier. Inspect it any time the column is disassembled for unrelated work.
Will a worn shift tube bushing throw a check engine light or transmission code on a Ford F 800?
Rarely. The bushing is a mechanical linkage component with no sensor attached, so the powertrain control module cannot detect its wear directly. However, if the misalignment causes the transmission range sensor or neutral safety switch to read an incorrect position, a related code or no-start condition can appear as a secondary symptom.
How do I know if I need the bushing or the entire shift tube on my Ford F 800?
Inspect the tube itself for cracks, bends, or corrosion after removing the column shroud. If the tube is straight and undamaged, replacing only the bushing restores proper function and costs far less. A bent or cracked tube will continue to cause slop even with a new bushing installed, and the full tube assembly will be necessary.

Automatic transmission shift tube bushings for other Ford models

Ford TaurusFord ExpeditionFord F-800Ford F-700Ford E-550 Super DutyFord E-550 Econoline Super Duty