Loading...

Ford Fiesta Ikon Strut Mount Kits

Ford Fiesta Ikon Strut mount kits

Strut mount kits for your Ford Fiesta Ikon start at $12.95, and AutoBuffy stocks 3 options from Anchor and Monroe. A strut mount secures the top of the strut assembly to the vehicle body and includes a bearing that allows steering movement. When it fails, the mount transfers road noise directly into the cabin and allows the strut to move imprecisely, degrading both ride quality and handling.

Signs your Ford Fiesta Ikon needs new strut mounts

  • Clunking or knocking noise from the front end when hitting bumps or dips, especially at low speed
  • Grinding or growling sensation felt through the steering wheel when turning, caused by a worn upper bearing plate
  • Excessive vibration transmitted through the floorboard or firewall that wasn't present before
  • Uneven or accelerated tire wear, particularly cupping or scalloping on the tread edges
  • Steering feels vague, slow to return to center, or requires more effort than normal
  • Visible cracking, tearing, or collapse of the rubber isolator when inspected with strut removed

Which strut mount kit should you buy for your Ford Fiesta Ikon?

The most important decision is whether you need just the upper mount and bearing plate or a complete kit that includes the spring seat, bump stop, and dust boot. Matching the kit to your driving conditions and how long you plan to keep the vehicle determines which grade makes the most sense.

Economy mount kit
Best for
High-mileage vehicles or short-term ownership
What you get
Basic rubber isolator and bearing plate meeting OE fit; lower upfront cost, shorter service life
OE-replacement kit
Best for
Daily drivers where factory ride quality is the priority
What you get
Direct-fit mount, bearing, spring seat, bump stop, and boot matched to original specs
Heavy-duty / performance kit
Best for
Trucks, tow vehicles, or enthusiast street driving
What you get
Stiffer polyurethane or reinforced rubber isolator for improved stability under load or spirited driving
Complete strut mount & coil spring assembly
Best for
High-mileage vehicles replacing worn springs at the same time
What you get
Pre-assembled upper mount hardware paired with a new spring, reducing labor and alignment risk

Strut mount kits brands we stock for your Ford Fiesta Ikon

Anchor
2 options · from $12.95
Monroe
1 option · from $60.95

Replacing strut mounts on a Ford Fiesta Ikon

Advanced⏱ 2–3 hours per axleSpring compressor (rented or professional)Socket set and breaker barTorque wrenchPry bar or strut visePenetrating oil

Replacing strut mounts on a Ford Fiesta Ikon requires safely compressing the coil spring before the strut shaft nut can be removed — skipping this step is dangerous and can result in serious injury. Once the spring is compressed, the old mount, bearing, spring seat, bump stop, and boot are removed and replaced as a complete kit, then the assembly is torqued to manufacturer specification. An alignment appointment should be scheduled immediately after the repair is complete.

Frequently asked questions

How much does it cost to replace strut mounts on a Ford Fiesta Ikon?
Parts for your Ford Fiesta Ikon start at $12.95 at AutoBuffy. A full DIY replacement costs that plus consumables like penetrating oil and new strut nuts. Shop labor typically adds one to two hours of labor time per axle, so total costs vary significantly depending on your local labor rate and whether springs are replaced at the same time.
Can I replace just the strut mount without replacing the strut on my Ford Fiesta Ikon?
Yes, if the strut body and cartridge are still in good condition. However, a strut must be fully disassembled using a spring compressor to access the mount. Since the strut is already apart, most mechanics recommend inspecting the spring, bump stop, and dust boot and replacing any worn components at the same time to avoid repeating the labor soon after.
How long do strut mounts last on a Ford Fiesta Ikon?
Strut mounts on a Ford Fiesta Ikon typically last several years but service life varies widely based on road conditions, climate, and driving style. Vehicles operated on rough roads or in regions with road salt tend to wear mounts faster. The rubber isolator and bearing plate often wear at different rates, so inspect both components when one shows signs of failure.
Do I need an alignment after replacing strut mounts on my Ford Fiesta Ikon?
Yes, a four-wheel alignment is strongly recommended after replacing strut mounts on a Ford Fiesta Ikon. The upper mount positions the top of the strut, which directly affects camber and caster settings. Even if the new mount appears to seat identically, disturbing the strut assembly is enough to shift alignment angles outside acceptable tolerances and cause premature tire wear.
Is it safe to drive a Ford Fiesta Ikon with a bad strut mount?
Driving on a failed strut mount is not recommended beyond getting the vehicle to a shop. A collapsed isolator reduces the strut's ability to control spring rebound, extending stopping distances and reducing cornering stability. A completely failed bearing plate can bind during steering input, which is a serious safety concern, especially at highway speed.
Should I replace strut mounts in pairs on my Ford Fiesta Ikon?
Replacing strut mounts in pairs on the same axle is recommended for your Ford Fiesta Ikon. If one mount has failed, the opposite side has accumulated equal mileage and wear stress. Mismatched mounts on the same axle create uneven suspension response and handling that pulls to one side, and you avoid paying for the labor a second time in the near future.

Shop strut mount kits by year for the Ford Fiesta Ikon

201520142013201220042003

More parts for your Ford Fiesta Ikon

A/C Refrigerant Discharge HoseA/C CompressorABS Wheel Speed SensorShock AbsorberRadiator Coolant HoseHVAC Blower MotorBrake Pad SetDrum Brake Wheel Cylinder

Strut mount kits for other Ford models

Ford F-150Ford FairmontFord MustangFord Transit ConnectFord TempoFord LTD