Loading...

Ford Police Interceptor Utility A/C Receiver Drier with Hose Assemblys

Ford Police Interceptor Utility A/c receiver drier with hose assemblys

Starting at $62.95, AutoBuffy stocks 1 A/C receiver drier with hose assembly options from UAC. This assembly filters moisture and debris from refrigerant while routing it to the expansion valve. When the desiccant inside saturates or a hose cracks, the entire A/C system loses efficiency and risks compressor damage.

Signs your Ford Police Interceptor Utility needs a new A/C receiver drier with hose assembly

  • Warm or inconsistent air from the cabin vents even when A/C is set to maximum cold
  • A/C compressor cycles on and off rapidly, indicating low or contaminated refrigerant pressure
  • Visible refrigerant oil staining or moisture around hose fittings and the drier canister
  • Musty or sour smell from the vents caused by moisture bypassing a saturated desiccant bag
  • Low-side pressure readings that drop abnormally fast during manifold gauge testing
  • A/C system blows cold intermittently, then fades — a classic sign of a restricted or moisture-logged drier

Which A/C receiver drier with hose assembly should you buy for your Ford Police Interceptor Utility?

The right assembly must match your Ford Police Interceptor Utility's refrigerant type, hose routing, and fitting sizes exactly — an imprecise fit risks leaks and voided A/C warranties. Beyond fit, the main decision is whether to choose an OE-equivalent unit for reliability, an upgraded assembly with an improved desiccant capacity, or a budget option for a short-term repair.

OE-Equivalent Assembly
Best for
Daily drivers and vehicles still under powertrain warranty
What you get
Direct-fit hose routing, OEM desiccant type, correct fittings — no modifications needed
Premium / Upgraded Desiccant Assembly
Best for
High-mileage vehicles or systems opened to atmosphere for extended periods
What you get
Larger or XH-9 desiccant capacity that absorbs more moisture before saturation
Economy / Value Assembly
Best for
Older vehicles, budget repairs, or cars in regions with moderate climate demands
What you get
Lower upfront cost, adequate desiccant, may use universal-style hose ends requiring minor adaptation
Complete Kit with O-Rings and Fittings
Best for
Full A/C system rebuilds or compressor replacement jobs
What you get
Pre-matched O-rings and seals included, reduces risk of leaks at every connection point

A/c receiver drier with hose assemblys brands we stock for your Ford Police Interceptor Utility

UAC
1 option · from $62.95

Replacing an A/C receiver drier with hose assembly on a Ford Police Interceptor Utility

Advanced⏱ 1.5–3 hours (not including refrigerant recovery and recharge)Manifold gauge setRefrigerant recovery machine (or shop evacuation service)Line wrench set (to avoid rounding flare fittings)Vacuum pumpO-ring pick and assembly lubricant

Have the A/C system professionally evacuated before disconnecting any fittings, then remove the old receiver drier and hose assembly, taking care not to contaminate open ports with shop debris. Install the new assembly using fresh, refrigerant-compatible O-rings lubricated with PAG oil, and tighten all fittings firmly but without over-torquing the flare connections. Pull a deep vacuum on the system for at least 30 minutes to remove moisture before recharging to the specification listed on your Ford Police Interceptor Utility's underhood A/C label.

Frequently asked questions

How much does it cost to replace A/C receiver drier with hose assemblies on a Ford Police Interceptor Utility?
Parts start at $62.95 on AutoBuffy for the Ford Police Interceptor Utility. Add shop labor of roughly one to two hours if you are not evacuating and recharging the system yourself. Total cost depends on whether the compressor or expansion valve also need replacement — both are commonly inspected at the same time.
Do I have to replace the receiver drier every time I open the A/C system on a Ford Police Interceptor Utility?
Yes, as a best practice. Once the system is opened to atmosphere, the desiccant inside begins absorbing ambient humidity immediately. Reusing a drier that has been exposed risks moisture contaminating the compressor oil and expansion valve. Most professional shops treat receiver drier replacement as mandatory any time refrigerant is evacuated.
Can I replace just the hose without replacing the receiver drier on a Ford Police Interceptor Utility?
Technically possible if the drier is confirmed dry and undamaged, but not recommended. Because the hose assembly and drier are sold as a unit for the Ford Police Interceptor Utility, splitting them means sourcing separate components that may not seal correctly. If the system has been open or the drier is original, replacing the full assembly is the safer and more cost-effective choice.
What refrigerant type does the Ford Police Interceptor Utility A/C receiver drier assembly use?
Confirm the refrigerant specification in your Ford Police Interceptor Utility owner's manual or on the underhood A/C label before purchasing. Most late-model vehicles use R-134a, while newer models may require R-1234yf. The receiver drier and hose assembly must be rated for the correct refrigerant — mixing types will damage seals and the desiccant material.
How long does a receiver drier with hose assembly last on a Ford Police Interceptor Utility?
Receiver driers typically last several years under normal use, but lifespan shortens significantly if the system loses charge, is opened for repairs, or the vehicle sits unused for extended periods. Heat cycles, hose age, and fitting corrosion affect the hose side. Inspecting both at every major A/C service is a reliable maintenance habit.
Is replacing an A/C receiver drier with hose assembly on a Ford Police Interceptor Utility a DIY job?
It is an advanced DIY task. The refrigerant must be legally recovered by an EPA Section 609-certified technician or machine before you open the system — you cannot legally vent it. If you have access to recovery equipment and a vacuum pump, the physical swap is straightforward. Most home mechanics take the system to a shop for evacuation and recharge only.

Shop a/c receiver drier with hose assemblys by year for the Ford Police Interceptor Utility

201920182017201620152014

More parts for your Ford Police Interceptor Utility

ABS Wheel Speed Sensor ConnectorMulti-Purpose Electrical ConnectorEngine MountStarter ArmatureEngine Timing Chain KitBall JointSide Marker Light ConnectorTorque Strut Mount

A/c receiver drier with hose assemblys for other Ford models

Ford FlexFord Special Service Police SedanFord Police Interceptor SedanFord EscapeFord FreestyleFord Five Hundred