Loading...
Ford Taurus Engine Coolant Water Outlet Housing Kits
Ford Taurus Engine coolant water outlet housing kits
Starting at $208.95, AutoBuffy stocks 3 engine coolant water outlet housing kits from Four Seasons for the Ford Taurus. The outlet housing seals the point where coolant exits the engine block or head toward the upper radiator hose. When it cracks, warps, or its gasket fails, coolant leaks and the engine overheats — damage that escalates quickly if ignored.
Signs your Ford Taurus needs a new engine coolant water outlet housing kit
- Visible coolant puddle or wet staining around the upper radiator hose neck or thermostat housing area
- Sweet smell of antifreeze from the engine bay, especially after the engine warms up
- Temperature gauge climbing higher than normal or spiking unexpectedly during normal driving
- Low coolant warning light or consistently dropping coolant reservoir level with no obvious external leak
- White residue or mineral deposits crusted around the outlet housing flange or mounting bolts
- Coolant seeping onto accessory belts, causing squealing or accelerated belt wear
Which engine coolant water outlet housing kit should you buy for your Ford Taurus?
The main decision is material and kit completeness. Housing kits vary by whether they include just the housing, or add a new thermostat, O-ring, and gasket — buying a complete kit saves a second coolant drain if the thermostat fails soon after. Material choice affects longevity, particularly on engines prone to electrolytic corrosion that degrades plastic housings.
| Option | Best for | What you get |
|---|---|---|
| OEM-spec plastic housing kit | Budget-conscious owners doing a straightforward like-for-like replacement | Housing matched to factory fit, gasket or O-ring included; same material as original |
| Aluminum billet housing kit | Owners in high-mileage or high-heat applications wanting a permanent fix | Corrosion-resistant cast or machined aluminum housing, gasket/O-ring, often longer service life |
| Complete kit with thermostat | Anyone whose thermostat is original or unknown age | Housing, thermostat, gasket, and all seals in one box; eliminates a second job if the thermostat sticks |
| Upper + lower outlet housing combo kit | Vehicles with two housing failure points or when both show seepage | Both housings, all gaskets and O-rings; reduces labor by addressing all outlet points in one coolant drain |
Engine coolant water outlet housing kits brands we stock for your Ford Taurus
Replacing the engine coolant water outlet housing on a Ford Taurus
Allow the engine to cool completely, then drain coolant from the radiator petcock or lower hose until the level drops below the outlet housing. Remove the upper radiator hose and any bracketed accessories blocking access, unbolt the housing, and clean the mating surface thoroughly before installing the new gasket or O-ring dry or with a thin coolant-compatible sealant if specified. Snug the housing bolts in a crossing pattern to the manufacturer's recommended range, refill the system with the correct coolant mixture, run the engine to operating temperature, and check for leaks before returning the vehicle to service.