Loading...
Starting at $4.95, AutoBuffy stocks 10 strut rod bushing kits from Dorman, Mevotech Original Grade, and Mevotech Supreme for the Ford Windstar. Strut rod bushings cushion the forward pivot point of the strut rod where it meets the chassis bracket, absorbing fore-and-aft suspension loads. When they crack or collapse, steering wanders, the front end clunks, and tire wear accelerates — all while alignment geometry drifts out of spec.
The main decision is material — standard rubber, polyurethane, or a complete kit that includes the strut rod itself. Rubber OE-style replacements restore factory ride quality, while polyurethane firms up handling and lasts longer in performance or high-mileage applications. Make sure the kit includes both the inner and outer bushings and any retaining hardware your Ford Windstar requires.
| Option | Best for | What you get |
|---|---|---|
| OE Rubber Replacement | Daily drivers, comfort-priority vehicles, restoring factory feel | Matched durometer rubber bushings that replicate factory compliance and noise isolation |
| Polyurethane Upgrade | Performance driving, high-mileage vehicles, improved steering response | Firmer poly bushings with tighter tolerances; resists oil, ozone, and heat better than rubber |
| Complete Kit (bushings + hardware) | High-mileage Ford Windstar or corroded fasteners, full restore | Both bushings, retaining washers, nut, and sometimes grease — nothing extra to source |
| Strut Rod & Bushing Assembly | Bent or damaged strut rod alongside worn bushings | New strut rod with pre-installed bushings; eliminates separate rod inspection step |
Raise and safely support the Ford Windstar, remove the wheel, and locate the strut rod where it passes through the chassis bracket at the front of the lower control arm area. Soak the retaining nut with penetrating oil before removal, as corrosion is common at this point. Slide out the old bushings and retaining washers, install the new kit in the correct orientation, and torque the retaining nut to the manufacturer's specification with the suspension at ride height — then follow up with a front wheel alignment.