Loading...
Honda Accord Fuel Tank Caps
Honda Accord Fuel tank caps
Starting at $8.95, AutoBuffy stocks 3 fuel tank caps from SKP and ACDelco to fit your Honda Accord. The fuel tank cap seals the filler neck, maintains evaporative emission system pressure, and prevents fuel vapors from escaping. A failed cap triggers the check engine light, causes fuel odor, and can reduce fuel economy by allowing vapors to vent instead of recirculate.
Signs your Honda Accord needs a new fuel tank cap
- Check engine light is on and a scan tool returns an EVAP system leak code (commonly P0455 or P0457)
- Smell of raw gasoline near the rear of the vehicle, especially after filling up
- Visible cracks, chips, or a damaged rubber gasket on the existing cap
- Cap does not click or ratchet when tightened — it spins freely without locking
- Failed emissions or OBD-II inspection due to an EVAP small or large leak code
- Fuel economy has dropped slightly with no other obvious mechanical cause
Which fuel tank cap should you buy for your Honda Accord?
The most important buying decision is fitment: thread pitch and filler-neck diameter must match your Honda Accord exactly, so always confirm by year, make, and model before ordering. Beyond fitment, you are choosing between OE-replacement caps that restore factory pressure specs and locking caps that add theft deterrence.
| Option | Best for | What you get |
|---|---|---|
| OE-Replacement (standard) | Daily drivers needing a like-for-like fix | Correct thread pitch, factory pressure rating, fresh rubber gasket — clears EVAP codes |
| Locking fuel cap | Vehicles parked in high-traffic or public areas | Keyed barrel lock prevents fuel theft and tampering; still meets EVAP sealing specs |
| OEM / Dealer-sourced cap | Owners who want exact factory part with OEM part number | Guaranteed fit, may cost more; best when aftermarket options are limited for the Honda Accord |
| High-pressure relief cap (tethered) | Older or performance vehicles with tethered-cap filler necks | Built-in tether prevents losing the cap; pressure-relief valve protects tank on vehicles with sealed systems |
Fuel tank caps brands we stock for your Honda Accord
Replacing the fuel tank cap on a Honda Accord
Remove the old cap by turning it counterclockwise until it releases, then wipe any dirt or fuel residue from the filler neck opening. Thread the new cap onto the filler neck clockwise until it clicks, indicating the pressure seal is engaged. If the check engine light was on, use an OBD-II scanner to clear the code, or allow a few drive cycles for the Honda Accord to clear it automatically.
