Loading...

Honda Clarity CV Axles

Honda Clarity Cv axles

CV axles for your Honda Clarity start at $156.95, and AutoBuffy stocks 4 options from TrakMotive. A CV axle transfers engine torque to the wheels through a constant range of motion. When it fails, you lose smooth power delivery and risk leaving the vehicle undriveable — catching it early prevents damage to surrounding drivetrain components.

Signs your Honda Clarity needs a new CV axle

  • Clicking or popping noise during turns, especially at low speed — the classic sign of a worn outer CV joint
  • Clunking when accelerating from a stop or shifting from reverse to drive, pointing to a failing inner CV joint
  • Grease splattered on the inside of the wheel or along the inside of the wheel well — torn CV boot leaking grease
  • Vibration that increases with vehicle speed and does not go away when coasting in neutral
  • Shuddering or jerking under hard acceleration, particularly noticeable on front-wheel-drive vehicles
  • A visible tear, crack, or missing clamp on the rubber CV boot during a visual inspection under the vehicle

Which CV axle should you buy for your Honda Clarity?

The most important decisions are shaft position (driver or passenger side, front or rear), and whether you want a remanufactured or new unit. Remanufactured axles cost less and are widely available, while new axles eliminate uncertainty about core quality. On some Honda Clarity applications, OE-spec or heavy-duty options exist for towing or performance use.

Remanufactured (reman)
Best for
Budget-conscious repairs on a high-mileage vehicle
What you get
Professionally rebuilt core with new boots, joints, and grease — lowest upfront cost
New aftermarket
Best for
Reliable daily drivers where long-term durability matters
What you get
Brand-new joints and shaft with no core concerns; moderate price step up from reman
OE-equivalent / OEM-spec
Best for
Owners who want factory fit and feel
What you get
Matches original shaft geometry, joint angles, and boot materials for the closest-to-stock experience
Heavy-duty / performance
Best for
Lifted, modified, or high-torque Honda Clarity applications
What you get
Reinforced joints and thicker shafts rated for higher torque loads and greater suspension travel

Cv axles brands we stock for your Honda Clarity

TrakMotive
4 options · from $156.95

Replacing a CV axle on a Honda Clarity

Moderate⏱ 1–2.5 hours per sideFloor jack and jack standsSocket set and breaker bar (for axle nut)Pry bar or axle removal toolTorque wrenchRubber mallet

Replacing a CV axle on the Honda Clarity involves removing the wheel, unbolting the axle nut, disconnecting the lower ball joint or strut as needed for clearance, and carefully prying the inner joint out of the transmission. The new axle snaps into the transmission with a firm push and the outer stub inserts into the wheel hub. Torque all fasteners to the specification listed in your service manual — the axle nut in particular requires a high torque value and must be secured with a new cotter pin or staked nut per the original design.

Frequently asked questions

How much does it cost to replace CV axles on a Honda Clarity?
Parts alone start at $156.95 per axle at AutoBuffy. Labor typically adds one to two hours of shop time per side. Replacing both axles at once saves on labor if one is already worn, since access to the second axle is straightforward once the first is out.
Can I drive my Honda Clarity with a bad CV axle?
Short distances may be possible, but it is not recommended. A torn boot quickly leads to joint failure as grease escapes and contamination enters. A fully failed CV joint can separate from the axle entirely, causing sudden loss of drive — and potentially damaging the transmission, wheel bearing, or subframe in the process.
How long do CV axles last on a Honda Clarity?
CV axles commonly last between 70,000 and 130,000 miles, though this varies widely by driving style, road conditions, and whether the CV boot was ever cracked or torn. Inspecting the boots at every oil change adds no cost and catches grease loss before joint damage occurs.
Do I need to replace both CV axles at the same time on my Honda Clarity?
Not always. If one axle fails and the other shows no clicking, vibration, or boot damage, replacing just the failed side is acceptable. However, if both axles have similar mileage and one has already failed, replacing the second axle preventively at the same service visit reduces future labor costs.
Will a new CV axle come with the CV boot and clamps included?
Yes — complete replacement CV axles come fully assembled with boots, clamps, and pre-packed grease on both the inner and outer joints. You do not need to purchase boots or grease separately. Verify that the listed axle includes both joints; some listings cover only a half-shaft without an inner assembly.
Is a CV axle the same as a half shaft on my Honda Clarity?
In most front-wheel-drive and all-wheel-drive applications, yes — the terms are used interchangeably. A half shaft is the complete axle assembly connecting the transmission or differential to the wheel hub. It includes the inner CV joint, the shaft, and the outer CV joint, all covered by protective boots.

Shop cv axles by year for the Honda Clarity

20212020201920182017

More parts for your Honda Clarity

HVAC Blower Motor RelayManifold Absolute Pressure SensorEngine Variable Valve Timing (VVT) Oil Pressure SensorEngine Camshaft Position Sensor ConnectorABS Wheel Speed SensorWheel Bearing KitEngine Crankshaft Position SensorFuel Pump Module Assembly

Cv axles for other Honda models

Honda CR-VHonda PassportHonda CrosstourHonda Accord CrosstourHonda CivicHonda Wagovan