Loading...

Honda Cr V Center High Mount Stop Lights

Honda Cr V Center high mount stop lights

Starting at low prices, AutoBuffy stocks multiple center high mount stop lights for the Honda Cr V from brands including top OE-quality brands. The center high mount stop light (CHMSL) is the third brake light mounted high in your rear window or on the roof, giving following drivers an earlier warning when you brake. A burned-out or cracked CHMSL is a safety hazard and a ticketable equipment violation in every U.S. state.

Signs your Honda Cr V needs a new center high mount stop light

  • The CHMSL does not illuminate at all when the brake pedal is pressed, confirmed by a helper or a reflection check
  • The lens is visibly cracked, yellowed, or shattered, allowing moisture inside and corroding the bulb socket or LED board
  • The light flickers or lights only partially, indicating a failing LED strip, loose wiring connector, or intermittent ground
  • Water or condensation is trapped inside the housing, fogging the lens and accelerating bulb or circuit failure
  • Your Honda Cr V failed a state inspection or received a fix-it ticket citing a non-functioning third brake light
  • The brake light warning indicator appears on the instrument cluster alongside a confirmed functioning main brake lights circuit, pointing to the CHMSL circuit specifically

Which center high mount stop light should you buy for your Honda Cr V?

The main decision is whether to buy an OE-style replacement that matches the factory fit and finish exactly, or an upgraded LED assembly that draws less power and lasts longer. You also need to confirm whether your Honda Cr V uses a bulb-style or fully integrated LED CHMSL, since the two are not interchangeable.

OEM-Equivalent (Bulb-Type)
Best for
Owners who want an exact factory replacement at the lowest upfront cost
What you get
Direct plug-and-play fit, standard incandescent bulb included or easily sourced, lens matches factory tint and shape
OEM-Equivalent (LED-Type)
Best for
Vehicles that came from the factory with an LED CHMSL
What you get
Drop-in replacement with factory LED board, no resistor needed, correct color temperature and flash pattern
Upgraded Aftermarket LED Assembly
Best for
Owners of bulb-based vehicles wanting longer service life and faster illumination
What you get
Brighter, faster-on LED light that activates milliseconds sooner than incandescent, may require a load resistor to prevent hyper-flash
Smoked or Tinted Lens Assembly
Best for
Style-focused owners who want a blacked-out or stealth look
What you get
Darker lens that reduces visible light output — confirm legality in your state before installing, as minimum brightness standards apply

Replacing the center high mount stop light on a Honda Cr V

Easy⏱ 15–45 minutesTrim panel removal tool or flat plastic pry toolPhillips and flathead screwdriversSmall socket or nut driver setElectrical contact cleaner

On most vehicles the CHMSL is accessed from inside the cabin by removing a small trim panel or shelf cover near the rear window, then disconnecting the wiring harness and unclipping or unscrewing the housing. The new assembly plugs directly into the factory connector with no splicing required in the vast majority of applications. After installation, have a helper confirm the light activates immediately and fully with brake pedal application before replacing any trim panels.

Frequently asked questions

How much does it cost to replace center high mount stop lights on a Honda Cr V?
Parts start at low prices on AutoBuffy for the Honda Cr V. A straightforward DIY swap costs only the part price since installation typically takes under 30 minutes with basic tools. If a shop does the work, expect one to two additional labor charges depending on whether the unit is interior-mounted and requires trim removal.
Is it illegal to drive a Honda Cr V with a broken center high mount stop light?
Yes. All passenger vehicles sold in the U.S. since 1986 are required by federal law to have a functioning CHMSL. Every state also enforces this as an equipment violation. Law enforcement can issue a fix-it ticket on the spot, and a failed CHMSL will cause your Honda Cr V to fail a state safety inspection.
Can I replace just the bulb in my Honda Cr V CHMSL instead of the whole assembly?
On bulb-style units, yes — the lens housing often pops off or unscrews, letting you swap only the bulb for a few dollars. On integrated LED assemblies the LED board is sealed into the housing and cannot be replaced separately, so the entire CHMSL assembly must be replaced when the LEDs fail.
How do I know if my Honda Cr V CHMSL is bulb-type or LED?
Check your owner's manual under the bulb replacement section. If the CHMSL is listed with a bulb number, it uses a replaceable incandescent or halogen bulb. If it says 'see dealer' or lists no bulb number, the unit is an integrated LED assembly. You can also look directly at the light — LEDs appear as a strip or cluster of small dots.
Why is my Honda Cr V center high mount stop light flickering after I replaced the assembly?
Flickering on a newly installed aftermarket LED CHMSL is almost always caused by a load mismatch. The Honda Cr V body control module or turn signal flasher expects the higher electrical resistance of an incandescent bulb. Installing an inline load resistor sized for your circuit resolves the flicker without triggering fault codes in most cases.
How long does a center high mount stop light last on a Honda Cr V?
Incandescent CHMSL bulbs typically last several years under normal use but can fail earlier from vibration or heat cycling. Integrated LED assemblies are rated for much longer service life and often outlast the vehicle, but lens cracking from sun exposure or rear-window defroster heat can force earlier replacement of the whole housing.

Center high mount stop lights for other Honda models

Honda CivicHonda CR-V