Loading...
Honda CR-V Engine Oil Pans
Honda CR-V Engine oil pans
Starting at $23.95, AutoBuffy stocks 25 engine oil pans for the Honda CR-V from brands including APDI, Dorman, and SKP. The oil pan bolts to the bottom of the engine block and holds the engine's full supply of motor oil. A cracked, corroded, or leaking pan starves the engine of lubrication, leading to rapid wear or catastrophic failure if ignored.
Signs your Honda CR-V needs a new engine oil pan
- Puddle of dark brown or black oil forming under the front-center of the vehicle after parking overnight
- Oil level drops noticeably between changes with no other visible external leak source
- Low oil pressure warning light illuminates at idle or during hard cornering as oil sloshes away from a damaged pickup area
- Visible crack, dent, or hole in the pan itself, often from road debris or a grounding impact
- Oil drain plug threads stripped or cross-threaded so the plug will not seal, no matter how it is torqued
- Persistent burning oil smell from oil dripping onto the hot exhaust system directly below the pan
Which engine oil pan should you buy for your Honda CR-V?
The main decisions are material and whether you need OE fitment or an upgraded aftermarket unit. Most Honda CR-V owners replacing a damaged pan want a direct-fit replacement that reuses the factory drain plug location and gasket surface, but material choice affects durability and cost. Confirm whether your CR-V uses a one-piece or two-piece pan assembly before ordering, as some engines have a separate upper windage tray.
OE-Style Stamped Steel
Best for
Daily drivers wanting a factory-correct, affordable fix
What you get
Exact factory dimensions, familiar gasket surface, lowest upfront cost, straightforward swap
Cast Aluminum Replacement
Best for
Owners in corrosion-prone climates or seeking longer service life
What you get
Corrosion resistance, slightly lighter weight, thicker walls that better resist impact damage from road debris
Reinforced Aftermarket Steel
Best for
High-mileage vehicles or those frequently driven on rough roads
What you get
Heavier-gauge steel than OE, often includes a magnetic drain plug, better impact resistance without the cost of aluminum
OEM / Dealer-Sourced Pan
Best for
Owners under warranty or needing guaranteed fit on complex multi-piece assemblies
What you get
Exact factory part with manufacturer tolerances, ideal when aftermarket options have limited fitment coverage for your specific CR-V engine variant
| Option | Best for | What you get |
|---|---|---|
| OE-Style Stamped Steel | Daily drivers wanting a factory-correct, affordable fix | Exact factory dimensions, familiar gasket surface, lowest upfront cost, straightforward swap |
| Cast Aluminum Replacement | Owners in corrosion-prone climates or seeking longer service life | Corrosion resistance, slightly lighter weight, thicker walls that better resist impact damage from road debris |
| Reinforced Aftermarket Steel | High-mileage vehicles or those frequently driven on rough roads | Heavier-gauge steel than OE, often includes a magnetic drain plug, better impact resistance without the cost of aluminum |
| OEM / Dealer-Sourced Pan | Owners under warranty or needing guaranteed fit on complex multi-piece assemblies | Exact factory part with manufacturer tolerances, ideal when aftermarket options have limited fitment coverage for your specific CR-V engine variant |
Engine oil pans brands we stock for your Honda CR-V
APDI
7 options · from $75.95
Dorman
7 options · from $56.95
SKP
7 options · from $23.95
ATP
3 options · from $114.95
Autotecnica
1 option · from $118.95
Replacing the engine oil pan on a Honda CR-V
Moderate⏱ 2–5 hoursFloor jack and jack stands or vehicle rampsOil drain pan and socket set with extensionsTorque wrenchGasket scraper and clean ragsRTV silicone sealant or replacement gasket (confirm which your CR-V uses)
Drain the engine oil completely, then remove any undercovers, crossmembers, or drivetrain components blocking access to the pan on your Honda CR-V — this step varies widely by model and is often the most labor-intensive part of the job. Remove all pan bolts in sequence, clean both mating surfaces thoroughly to remove all old gasket material, then install the new pan with a fresh gasket or sealant and tighten the bolts evenly in a cross pattern to the manufacturer's specified range. Refill with fresh oil, start the engine, and inspect for leaks before returning the vehicle to service.
Frequently asked questions
How much does it cost to replace engine oil pans on a Honda CR-V?
The part itself starts at $23.95 on AutoBuffy. Total cost including professional labor typically ranges from a few hundred to several hundred dollars depending on engine accessibility on your Honda CR-V. Labor time varies significantly — front-wheel-drive transverse engines and all-wheel-drive models often require subframe drops or drivetrain disassembly, raising shop hours considerably.
Can I drive my Honda CR-V with a leaking oil pan?
You should not drive with a confirmed oil pan leak beyond what is absolutely necessary to reach a safe stop or shop. Even a slow drip lowers the oil level over time, and running the engine low on oil accelerates bearing and cylinder wear rapidly. Check the dipstick before each trip and add oil only as a short-term emergency measure, not a fix.
Does replacing the oil pan on a Honda CR-V require dropping the subframe?
It depends entirely on the engine layout in your specific CR-V. Many front-wheel-drive and all-wheel-drive Honda CR-V configurations require lowering the front subframe or removing axle shafts to clear the pan. Rear-wheel-drive layouts are generally more accessible. Check a model-specific repair procedure before estimating labor time, as this single factor most affects total job difficulty and cost.
Do I need a new gasket when replacing the oil pan on a Honda CR-V?
Yes — always install a fresh gasket or apply new RTV sealant as specified for your CR-V's pan design. Reusing a compressed or torn gasket almost guarantees an immediate leak. Many oil pans sold at AutoBuffy include a gasket in the kit; confirm before ordering so you have everything on hand before draining the oil.
How long do engine oil pans last on a Honda CR-V?
A steel or aluminum oil pan on a Honda CR-V can last the lifetime of the engine under normal conditions. Premature failure is almost always caused by a road impact such as a rock, curb strike, or bottoming out, or by corrosion from road salt in northern climates. Stripped drain plug threads from repeated over-tightening during oil changes are another common reason for early replacement.
What is the difference between an oil pan and an oil pan gasket — which part do I actually need?
The oil pan is the metal reservoir itself; the gasket is the seal between the pan and the engine block. If your Honda CR-V is leaking only from the gasket surface with no physical damage to the pan, replacing just the gasket may solve the problem at lower cost. If the pan is cracked, dented, or has stripped drain plug threads, the pan itself must be replaced.