Loading...

Honda Cr V Engine Variable Valve Timing (VVT) Solenoid Filter Gaskets

Honda Cr V Engine variable valve timing (vvt) solenoid filter gaskets

Engine Variable Valve Timing (VVT) solenoid filter gaskets start at low prices at AutoBuffy, where you'll find multiple options from brands including top OE-quality brands. This small mesh-and-rubber assembly seals the VVT solenoid port and filters oil entering the phaser circuit. When it clogs or leaks, oil pressure to the camshaft phaser drops, triggering timing faults and rough running.

Signs your Honda Cr V needs a new VVT solenoid filter gasket

  • Check engine light with stored camshaft position actuator codes (typically P0010–P0015 range or equivalent)
  • Rough idle or idle surge caused by erratic camshaft phaser response due to restricted oil flow
  • Sluggish low-RPM acceleration as variable valve timing fails to advance or retard correctly
  • Oil leak at the VVT solenoid mounting boss, visible as fresh oil weeping around the solenoid base
  • Rattling or ticking from the valve cover area at cold start, pointing to delayed phaser engagement
  • Failed emissions test or elevated hydrocarbon readings linked to incorrect valve timing

Which VVT solenoid filter gasket should you buy for your Honda Cr V?

The main decision is whether to buy the filter gasket alone or as part of a kit that includes the solenoid O-ring and screen. Because the gasket, O-ring, and filter screen fail together from heat cycling and oil degradation, replacing all three at once prevents a repeat job. Match the port diameter and screen mesh spec to your original part.

OEM-equivalent filter gasket (single piece)
Best for
Budget-conscious owners replacing only a confirmed failed gasket
What you get
Exact-fit rubber or molded gasket matching original port dimensions and compression rating
Filter gasket + screen kit
Best for
Most DIYers doing a thorough repair
What you get
Replacement gasket plus the mesh filter screen; eliminates restricted flow from a clogged screen in one step
Complete VVT solenoid seal kit
Best for
High-mileage engines or second-time repairs
What you get
Gasket, screen, and all associated O-rings for a full reseal of the solenoid circuit
OEM-sourced (dealer-spec) gasket
Best for
Owners who want factory material and fit
What you get
Gasket manufactured to original equipment specification, typically a direct part-number match for the Honda Cr V

Replacing VVT solenoid filter gaskets on a Honda Cr V

Easy⏱ 30–60 minutesSocket set and ratchetTorque wrenchNeedle-nose pliers or pick tool (for screen removal)Clean lint-free ragsDrain pan

Disconnect the solenoid electrical connector, remove the solenoid retaining bolt, and pull the solenoid straight out of its bore. Extract the old filter screen and gasket, clean the seating surface thoroughly, then seat the new screen and gasket before reinstalling the solenoid. Snug the retaining bolt to a firm, even torque — do not overtighten — reconnect the electrical connector, and run the engine to confirm the repair with no leaks and no returned fault codes.

Frequently asked questions

How much does it cost to replace VVT solenoid filter gaskets on a Honda Cr V?
Parts alone start at low prices for the Honda Cr V. A full kit with screen and O-rings runs modestly more. If you pay a shop, expect one to two hours of labor added to the parts cost. The job is straightforward enough that many owners handle it at home with basic hand tools.
Can a clogged VVT solenoid filter gasket cause a check engine light on a Honda Cr V?
Yes. A clogged or leaking filter gasket restricts oil flow to the camshaft phaser, causing the phaser to respond slowly or not at all. The ECM detects the timing error and sets a camshaft actuator performance or circuit code. Clearing the code without replacing the filter gasket will result in the light returning quickly.
How often should the VVT solenoid filter gasket be replaced on a Honda Cr V?
There is no fixed mileage interval, but the filter gasket is commonly serviced whenever a VVT solenoid is replaced or when a phaser-related code appears. Using the wrong oil viscosity or extending oil changes beyond the manufacturer's recommendation accelerates screen clogging and gasket hardening, making earlier replacement likely.
Is it safe to drive a Honda Cr V with a failing VVT solenoid filter gasket?
Short trips at reduced speed are generally low-risk, but continued driving is not advisable. A leaking gasket can lower oil pressure at the phaser circuit and cause camshaft phaser wear over time. If a check engine light is on and timing-related codes are stored, the issue should be addressed promptly to avoid secondary damage.
Do I need to replace the VVT solenoid itself when replacing the filter gasket on a Honda Cr V?
Not necessarily. If the solenoid tests within spec and shows no internal damage, replacing only the filter gasket and screen is sufficient. However, if the solenoid has been operating with restricted oil flow for an extended period, inspecting or testing it before reassembly is worthwhile. Replacing both together is common on high-mileage engines.
Does the VVT solenoid filter gasket replacement require draining the engine oil on a Honda Cr V?
Usually no full drain is required, but some oil will escape when the solenoid is removed. Placing a small drain pan under the solenoid and having rags ready is recommended. Topping off the oil level after the repair and checking for leaks at the next startup is standard practice before returning to normal driving.

Engine variable valve timing (vvt) solenoid filter gaskets for other Honda models

Honda ElementHonda S2000Honda FitHonda PilotHonda CityHonda CR-V