Loading...
Honda CRX Ball Joint Sets
Honda Crx Ball joint sets
Ball joint sets for the Honda Crx start at $74.95 and AutoBuffy stocks 15 options from brands including MOOG, Mevotech Original Grade, and Suspensia. Ball joints are the pivot points connecting your control arms to the steering knuckle, letting the suspension move while keeping the wheels aligned. When they wear out, handling becomes unpredictable and tire wear accelerates rapidly.
Signs your Honda Crx needs new ball joints
- Clunking or knocking noise from the front suspension when hitting bumps, turning, or accelerating
- Steering wheel vibrates or feels loose, especially at highway speeds
- Uneven or rapid tire wear on the inner or outer edges of the front tires
- Vehicle pulls to one side without steering input, even on a flat, straight road
- Visible play or wobble in the front wheel when lifted off the ground and rocked at 12 and 6 o'clock
- Front end drifts or wanders during lane changes, requiring constant steering correction
Which ball joint set should you buy for your Honda Crx?
The main decisions are position (upper vs. lower), construction quality, and whether the joint is greaseable or sealed for life. Lower ball joints are load-bearing on most vehicles and wear faster, so quality matters most there. Match the joint type — press-in, bolt-in, or screw-in — to whatever your Honda Crx uses from the factory.
OE-Replacement (sealed)
Best for
Daily drivers wanting a direct, no-maintenance swap
What you get
Factory-equivalent sealed grease pocket, straightforward installation, predictable lifespan
Greaseable Performance
Best for
High-mileage vehicles or drivers who do their own maintenance
What you get
Zerk fitting for periodic greasing, extended service life, better value long-term
Upper Ball Joint Set
Best for
Vehicles with double-wishbone suspension needing upper pivot renewal
What you get
Restores proper caster and camber geometry at the upper control arm pivot point
Complete Upper + Lower Kit
Best for
Vehicles with significant overall front-end wear or after an accident
What you get
Both positions replaced together, eliminates mismatched wear, single labor event
| Option | Best for | What you get |
|---|---|---|
| OE-Replacement (sealed) | Daily drivers wanting a direct, no-maintenance swap | Factory-equivalent sealed grease pocket, straightforward installation, predictable lifespan |
| Greaseable Performance | High-mileage vehicles or drivers who do their own maintenance | Zerk fitting for periodic greasing, extended service life, better value long-term |
| Upper Ball Joint Set | Vehicles with double-wishbone suspension needing upper pivot renewal | Restores proper caster and camber geometry at the upper control arm pivot point |
| Complete Upper + Lower Kit | Vehicles with significant overall front-end wear or after an accident | Both positions replaced together, eliminates mismatched wear, single labor event |
Ball joint sets brands we stock for your Honda Crx
MOOG
11 options · from $93.95
Mevotech Original Grade
3 options · from $74.95
Suspensia
1 option · from $151.95
Replacing ball joints on a Honda Crx
Advanced⏱ 2–4 hours per sideHydraulic floor jack and jack standsBall joint press or pickle forkBreaker bar and socket setTorque wrenchTie rod separator or joint separator
Start by safely lifting and supporting the Honda Crx, removing the wheel, and disconnecting the brake caliper and rotor to access the knuckle. A ball joint press is required for most press-in applications — a pickle fork works for removal but damages the boot, so use it only on joints being discarded. After installation, have the front end aligned before returning the vehicle to normal use, as ball joint replacement always shifts suspension geometry.
Frequently asked questions
How much does it cost to replace ball joints on a Honda Crx?
Parts for a Honda Crx ball joint set start at $74.95 at AutoBuffy. Total cost including professional labor typically runs higher, as pressing out and installing ball joints requires a hydraulic press and alignment afterward. Doing the work yourself with the right tools keeps the cost closer to the part price alone.
How long do ball joints last on a Honda Crx?
Ball joints on the Honda Crx generally last somewhere between 70,000 and 150,000 miles, though this varies widely with driving conditions. Gravel roads, potholes, and off-road use accelerate wear significantly. Sealed joints require no maintenance; greaseable joints last longer when serviced on schedule at every oil change.
Can I drive my Honda Crx with a bad ball joint?
No — a worn ball joint on your Honda Crx is a safety risk and should not be driven on. A failed ball joint can separate suddenly, causing the wheel to collapse inward and total loss of steering control. If you hear clunking or notice handling changes, have it inspected immediately before driving further.
Do I need an alignment after replacing ball joints on my Honda Crx?
Yes. Replacing ball joints on your Honda Crx directly affects caster and camber angles, so a four-wheel alignment is required after installation. Skipping the alignment will cause rapid, uneven tire wear and pulling. Budget for an alignment appointment when planning the repair — it is not optional.
Should I replace upper and lower ball joints at the same time on my Honda Crx?
It is strongly recommended. If one ball joint on your Honda Crx is worn, the others have likely accumulated similar mileage and stress. Replacing the full set in a single labor event saves money on future shop time, ensures balanced handling, and avoids a repeat alignment cost within a short period.
How do I know if my Honda Crx has press-in or bolt-in ball joints?
Check whether the ball joint sits inside the control arm housing or attaches with bolts through the arm. Press-in joints require a hydraulic press to remove and install, making them a more advanced DIY job. Bolt-in joints use fasteners only and are significantly easier to swap at home with basic hand tools.