Loading...

Hyundai Elantra Back Up Light Assemblys

Hyundai Elantra Back up light assemblys

Starting at $115.95, AutoBuffy stocks 4 back up light assemblies from TYC to fit the Hyundai Elantra. A back up light assembly illuminates the area behind your vehicle when reverse gear is engaged, warning pedestrians and helping you see obstacles. A failed unit leaves you reversing blind and can result in a failed inspection.

Signs your Hyundai Elantra needs a new back up light assembly

  • One or both reverse lights fail to illuminate when the transmission is shifted into reverse
  • The lens housing is cracked, yellowed, or shattered from impact damage
  • Water or condensation is visible inside the lens, causing corrosion on the bulb socket
  • The light flickers or cuts out intermittently while in reverse gear
  • Reverse light works but output is noticeably dim compared to the opposite side
  • The mounting tabs or bezel are broken, causing the assembly to sit loose or misaligned in the body panel

Which back up light assembly should you buy for your Hyundai Elantra?

The main decision is whether to replace the full assembly or just the bulb and socket — if the lens or housing is physically damaged, a complete assembly is the correct fix. You should also confirm whether your Hyundai Elantra uses a standalone reverse light unit or a combined tail lamp assembly with an integrated back up light section, as both types are available. OE-replacement and aftermarket grades differ in lens clarity, housing thickness, and included hardware.

OE-Equivalent Replacement
Best for
Owners who want factory fit and finish with a direct bolt-on swap
What you get
Matched lens tint, correct mounting points, pre-installed gasket, and bulb socket
Aftermarket Value Grade
Best for
Budget-conscious repairs where appearance is secondary to function
What you get
Functional housing and lens at a lower price point; may require transferring existing bulb
Clear/Euro-Style Lens
Best for
Owners who prefer a cleaner or custom look while maintaining reverse function
What you get
Clear or smoked lens housing in place of the factory amber or red-tinted surround
Combined Tail Lamp Assembly with Integrated Reverse Section
Best for
Vehicles where the reverse light shares a housing with brake and tail lamps
What you get
Full multi-function assembly replacing all lamp sections in one unit; eliminates mismatched lenses

Back up light assemblys brands we stock for your Hyundai Elantra

TYC
4 options · from $115.95

Replacing the back up light assembly on a Hyundai Elantra

Easy⏱ 30–60 minutesScrewdriver set (Phillips and flathead)Trim panel removal tool or plastic pry barSocket and ratchet setNeedle-nose pliers

On most vehicles, the back up light assembly is secured by a small number of screws or push-pin fasteners accessible either from the exterior or through the trunk or cargo area after pulling back the interior trim panel. Disconnect the wiring harness connector, remove the fasteners, and swap in the new assembly before reconnecting the harness and testing in reverse. No special equipment is required, and the job does not involve suspension, brake lines, or other safety-critical systems.

Frequently asked questions

How much does it cost to replace back up light assemblies on a Hyundai Elantra?
Parts alone start at $115.95 for the Hyundai Elantra. A standalone assembly replacement is straightforward enough that many owners do it themselves, keeping total cost near the part price. Shop labor, if used, typically adds less than an hour of time given how accessible most reverse light assemblies are.
Can I just replace the bulb instead of the whole back up light assembly on my Hyundai Elantra?
Yes, if the lens and housing are physically intact. Remove the assembly or access the socket from behind the trim panel, swap the bulb, and test before reassembling. If the lens is cracked or the socket is corroded beyond cleaning, replacing the full assembly is more reliable and often not much more expensive.
Will a bad back up light assembly cause my Hyundai Elantra to fail a safety inspection?
In most states and provinces, yes. Reverse lights are a required safety item on inspection checklists. A cracked lens, inoperative bulb, or missing assembly will result in a rejection. Replacing the assembly before your inspection date is the fastest way to resolve the failure and avoid a reinspection fee.
Why does my Hyundai Elantra back up light work sometimes but not others?
Intermittent operation on a Hyundai Elantra typically points to a failing reverse light switch, a corroded bulb socket, or a cracked solder joint inside the assembly. Before replacing the assembly, test the socket with a multimeter in reverse. If voltage is present but the light is unreliable, the assembly itself — socket, bulb, or internal wiring — is the likely culprit.
How do I know if my Hyundai Elantra uses a standalone back up light or a combined tail lamp assembly?
Check the rear of the vehicle: if the reverse light has its own dedicated housing separate from the brake and tail lights, it is a standalone unit. If all functions share one lens housing, you need a combined assembly. Your Hyundai Elantra listing on AutoBuffy will specify the correct configuration so you order the right part.
Is it safe to drive my Hyundai Elantra without a working back up light?
It is legal in some jurisdictions but not recommended. A non-functioning back up light removes a critical warning signal for pedestrians and cyclists behind your vehicle, and it increases your risk of backing into objects or people in low-light conditions. Most jurisdictions also treat it as an equipment violation subject to a traffic citation.

Shop back up light assemblys by year for the Hyundai Elantra

20202019

More parts for your Hyundai Elantra

Wheel Bearing Retaining RingA/C Compressor Control ValveSide Marker Light AssemblyEngine Oil FilterEngine Timing Idler BearingHeadlight RelayHVAC RelaySpark Plug

Back up light assemblys for other Hyundai models

Hyundai Santa CruzHyundai PalisadeHyundai TucsonHyundai Santa FeHyundai Venue