Loading...

Hyundai Sonata Mass Air Flow Sensor Assemblys

Hyundai Sonata Mass air flow sensor assemblys

Starting at $57.95, AutoBuffy stocks 9 mass air flow sensor assemblies from SKP and GPD to fit the Hyundai Sonata. The MAF sensor measures the volume and density of air entering the engine so the ECU can deliver the correct fuel mixture. A failed sensor causes rough running, poor fuel economy, and failed emissions tests.

Signs your Hyundai Sonata needs a new mass air flow sensor assembly

  • Check Engine light is on with codes P0100–P0104 stored in the ECU
  • Engine stumbles, hesitates, or surges during acceleration
  • Noticeably worse fuel economy over several fill-ups
  • Rough idle that may worsen when the engine is cold
  • Engine stalls shortly after starting or at low speeds
  • Black smoke from the exhaust or a rich fuel smell indicating an over-fueling condition

Which mass air flow sensor assembly should you buy for your Hyundai Sonata?

The main decision is whether to choose an OE-equivalent direct-fit unit, a remanufactured assembly, or a performance-grade sensor. You should also confirm whether your Hyundai Sonata uses a standalone MAF sensor or an integrated housing assembly that includes the intake boot and wiring pigtail, as fitment differs significantly between configurations.

OE-Equivalent Direct-Fit
Best for
Drivers who want a stock restoration with guaranteed fitment
What you get
Plug-and-play replacement matching factory calibration; no relearning procedure required in most cases
Remanufactured Assembly
Best for
Budget-conscious owners who still want a complete, tested unit
What you get
Cleaned and recalibrated OE core; lower price than new but may require a core return
Performance / High-Flow MAF
Best for
Modified engines with cold-air intakes or increased displacement
What you get
Wider measurement range to support greater airflow; may require an ECU tune to read correctly
Integrated Assembly with Boot & Pigtail
Best for
Vehicles where the connector or intake tube is cracked or damaged
What you get
Complete drop-in kit replacing the sensor, housing, and wiring harness connector in one purchase

Mass air flow sensor assemblys brands we stock for your Hyundai Sonata

SKP
5 options · from $57.95
GPD
4 options · from $66.95

Replacing the mass air flow sensor assembly on a Hyundai Sonata

Easy⏱ 30–60 minutesOBD-II scanner (to clear codes)Flathead and Phillips screwdriversT20 or T25 Torx driver (varies by application)MAF sensor cleaner sprayHose clamp pliers or a nut driver

Disconnect the battery or simply unplug the MAF sensor connector, loosen the intake clamps on either side of the sensor housing, and remove the assembly from the intake tract. Transfer any reusable gaskets or grommets to the new unit, seat it into the intake tract, and tighten the clamps snugly without over-torquing the plastic housing. Reconnect the wiring harness, clear any stored fault codes, and take the Hyundai Sonata for a short drive to confirm smooth idle and acceleration.

Frequently asked questions

How much does it cost to replace mass air flow sensor assemblies on a Hyundai Sonata?
Parts start at $57.95 at AutoBuffy. A shop will typically charge one to two hours of labor on top of the part cost. DIY replacement on most Hyundai Sonata applications is straightforward enough that many owners complete the job in under an hour with basic hand tools, keeping the total cost close to the part price alone.
Can I clean my Hyundai Sonata's MAF sensor instead of replacing it?
Yes, if the sensor element is contaminated but not electrically damaged, cleaning with dedicated MAF sensor spray can restore normal readings. Spray only the sensing wire or film element, never touch it, and allow it to dry completely before reinstalling. If codes return within a short time after cleaning, the sensor has failed and needs replacement.
Do I need to reset or reprogram the ECU after installing a new MAF sensor on my Hyundai Sonata?
In most cases, clearing the stored fault codes with an OBD-II scanner is sufficient. The ECU on the Hyundai Sonata will recalibrate fuel trims during the first several drive cycles. Performance MAF sensors calibrated to a different measurement range are an exception and may require a custom ECU tune to read accurately.
What causes a mass air flow sensor to fail on a Hyundai Sonata?
The most common causes are a dirty or oiled air filter allowing contamination onto the sensing element, use of heavily oiled aftermarket air filters, age-related degradation of the sensing wire or film, and moisture intrusion. Tearing or cracking of the intake boot upstream of the sensor can also cause false readings by introducing unmetered air.
Will a bad MAF sensor cause my Hyundai Sonata to fail an emissions test?
Yes. A faulty MAF sensor disrupts the air-fuel ratio, which directly increases hydrocarbon and CO emissions. It will also trigger a Check Engine light, which is an automatic failure in most OBD-II emissions programs. Replacing the sensor and completing enough drive cycles for the readiness monitors to set is necessary before retesting.
How do I know which MAF sensor assembly fits my Hyundai Sonata?
Use the year, make, model, engine displacement, and fuel system type to confirm fitment. AutoBuffy's fitment filter narrows the 9 available units to only those confirmed for the Hyundai Sonata. If your engine has been modified with a larger intake or different throttle body, cross-reference the sensor's measurement range against your engine's airflow requirements before ordering.

Shop mass air flow sensor assemblys by year for the Hyundai Sonata

201020092008200720062005200420032002200120001999

More parts for your Hyundai Sonata

Idle Air Control Valve ConnectorHVAC Pressure TransducerCV Joint BootSpark Plug Wire SetEngine Variable Valve Timing (VVT) Oil Control ValveFuel Pump O-RingAuxiliary Engine Cooling Fan RelayHVAC Clutch Coil Connector

Mass air flow sensor assemblys for other Hyundai models

Hyundai AzeraHyundai XG300Hyundai XG350Hyundai GenesisHyundai ScoupeHyundai Tiburon