Loading...

Hyundai Tiburon Computer Control Relays

Hyundai Tiburon Computer control relays

Starting at low prices, AutoBuffy stocks multiple computer control relays from top OE-quality brands to fit your Hyundai Tiburon. The computer control relay supplies switched power to the ECU and related control modules; when it fails, the engine may crank without starting or cut out entirely, leaving you stranded and triggering a cascade of fault codes.

Signs your Hyundai Tiburon needs a new computer control relay

  • Engine cranks normally but will not start, with no spark or injector pulse confirmed
  • Check Engine light illuminates alongside codes pointing to loss of ECU power or main relay failure
  • Engine starts fine when cold but stalls or refuses to restart after reaching operating temperature
  • Intermittent no-start condition that resolves on its own after the vehicle cools down
  • All dash warning lights come on at once and the engine shuts off without warning while driving
  • Scan tool cannot establish communication with the ECU even though the battery and fuses test good

Which computer control relay should you buy for your Hyundai Tiburon?

The main decision is whether to replace the relay as a standalone component or as part of a relay assembly, and whether to choose an OE-equivalent or an upgraded heavy-duty unit. Fit matters most here — an incorrect coil voltage rating or terminal layout can prevent the ECU from receiving power at all.

OE-Equivalent Replacement
Best for
Most daily drivers wanting a direct, no-hassle swap
What you get
Identical coil resistance, terminal layout, and switching capacity to the original relay
Heavy-Duty / High-Current Relay
Best for
High-mileage vehicles or those with aftermarket electronics adding load
What you get
Upgraded contact material rated for higher amperage to resist the heat-related contact erosion that causes intermittent failures
OEM / Dealer-Sourced Relay
Best for
Owners who want factory-exact specifications and fitment confirmation
What you get
Part stamped or validated by the vehicle manufacturer, often with stricter quality tolerances
Relay + Connector Pigtail Kit
Best for
Vehicles where heat or corrosion has damaged the relay socket or wiring
What you get
Replacement relay bundled with a pre-terminated connector to restore a clean, corrosion-free electrical connection

Replacing the computer control relay on a Hyundai Tiburon

Easy⏱ 15–45 minutesDigital multimeterRelay puller or flat-blade screwdriverNeedle-nose pliersFuse box diagram (owner's manual or underhood label)Electrical contact cleaner and dielectric grease

Locate the relay in the under-hood or interior fuse and relay box using the Hyundai Tiburon fuse diagram, pull the old relay straight out, and press the new relay firmly into the same socket until it seats fully. Before installing, spray the relay socket with electrical contact cleaner and apply a thin coat of dielectric grease to the terminals to prevent future corrosion. Confirm the repair by cycling the ignition on and off a few times to verify the fuel system primes and the engine starts normally.

Frequently asked questions

How much does it cost to replace computer control relays on a Hyundai Tiburon?
Parts start at low prices for a Hyundai Tiburon computer control relay at AutoBuffy. DIY replacement typically adds no labor cost beyond basic tools. A shop may charge 0.5–1 hour of labor on top of the part price, making this one of the more affordable electrical repairs on the Hyundai Tiburon.
What is a computer control relay and what does it do on a Hyundai Tiburon?
The computer control relay — sometimes called the main relay or ECU power relay — closes when the ignition is switched on to supply battery voltage to the engine control unit and associated sensors. Without it, the ECU cannot power up, so the engine will not start and no fuel system priming will occur.
Can a bad computer control relay cause a no-start on a Hyundai Tiburon?
Yes, a failed computer control relay is a common cause of a no-start condition on the Hyundai Tiburon. Because it controls power to the ECU, a relay with burnt contacts or a failed coil will prevent the computer from activating the fuel pump, injectors, and ignition system entirely, even though the engine cranks.
Why does my Hyundai Tiburon start fine when cold but not when warm?
Heat is the most common cause of intermittent computer control relay failure. Solder joints and relay contacts inside the unit expand unevenly as temperature rises, breaking electrical continuity. The Hyundai Tiburon may restart after cooling down because the contacts temporarily make contact again, which is a classic sign the relay needs replacement.
How do I test the computer control relay on my Hyundai Tiburon before replacing it?
Remove the relay and use a multimeter to measure coil resistance across the control terminals — a reading outside the expected range indicates a failed coil. Apply the rated voltage to the coil terminals and probe the switch terminals for continuity; no click and no continuity confirms the relay is defective and should be replaced.
Is the computer control relay the same as the fuel pump relay on a Hyundai Tiburon?
Not always. On many Hyundai Tiburon applications the computer control relay powers the ECU directly and may also trigger the fuel pump circuit through the ECU, while a separate fuel pump relay handles the pump load. On some platforms a single main relay covers both functions. Check the fuse box diagram for your specific Hyundai Tiburon configuration.

More parts for your Hyundai Tiburon

A/C Compressor ClutchOxygen SensorHazard Warning SwitchIgnition Lock CylinderEngine Crankshaft SealEngine Oil Cooler Mounting KitFuel Injector Seal KitStarter Solenoid

Computer control relays for other Hyundai models

Hyundai VeracruzHyundai Santa FeHyundai AzeraHyundai SonataHyundai EntourageHyundai Elantra