Loading...

Isuzu Rodeo Sport Engine Mounts

Isuzu Rodeo Sport Engine mounts

Engine mounts for your Isuzu Rodeo Sport start at $15.95, and AutoBuffy stocks 7 options from DEA, Westar, and Anchor. An engine mount bolts the engine to the frame and absorbs vibration between the two. When a mount collapses or tears, the engine shifts under load — causing vibration, clunking, and accelerated stress on belts, hoses, and exhaust components.

Signs your Isuzu Rodeo Sport needs new engine mounts

  • A loud clunk or thud when shifting from Park into Drive or Reverse
  • Excessive engine movement visible when revving in neutral with the hood open
  • Heavy vibration felt through the floor, seat, or steering wheel at idle or acceleration
  • Rattling or banging from the engine bay over bumps or during hard acceleration
  • Visible cracking, tearing, or oil saturation on the rubber portion of the mount
  • Increased stress or wear on nearby hoses, belts, or the exhaust flex pipe due to engine rocking

Which engine mount should you buy for your Isuzu Rodeo Sport?

The main decisions are mount position (front, rear, left, right, or torque strut) and construction type — standard rubber, hydraulic, or solid. Match the mount to the exact position that has failed, since each location handles different load directions. Westar is a specialist mount manufacturer widely regarded for strong fitment and value on engine and transmission mounts, making them a solid first look alongside the other brands in our catalog.

OEM-style rubber mount
Best for
Daily drivers seeking a quiet, factory-feel replacement
What you get
Bonded rubber and steel construction that restores original NVH isolation and meets factory movement tolerances
Hydraulic (fluid-filled) mount
Best for
Vehicles that originally used hydraulic mounts or drivers prioritizing maximum vibration damping
What you get
Fluid-filled chamber that absorbs a broader range of frequencies than solid rubber, closest to factory refinement on equipped applications
Heavy-duty / performance mount
Best for
Towing, high-output engines, or high-mileage vehicles prone to repeat failures
What you get
Stiffer rubber compound or polyurethane insert that resists collapse under sustained load — trades some NVH isolation for durability
Complete mount kit (all positions)
Best for
High-mileage vehicles where multiple mounts are worn simultaneously
What you get
Matched set covering all mount positions, ensuring consistent stiffness across the engine cradle and avoiding a single-mount repair loop

Engine mounts brands we stock for your Isuzu Rodeo Sport

DEA
4 options · from $20.95
Westar
2 options · from $15.95
Anchor
1 option · from $24.95

Replacing engine mounts on a Isuzu Rodeo Sport

Moderate⏱ 1–3 hours per mountFloor jack and jack standsSocket set and breaker barTorque wrenchPry barPenetrating oil (for corroded fasteners)

Replacing an engine mount on a Isuzu Rodeo Sport requires supporting the engine with a floor jack and wood block before unbolting the old mount, since removing the mount releases the engine's fixed point on that side. Once the engine is safely supported, the old mount unbolts from both the engine bracket and the subframe or body, and the new unit installs in reverse order. Torque all fasteners to the specification listed in the service manual for your Isuzu Rodeo Sport's engine mount positions, and double-check that the engine sits level before lowering the jack.

Frequently asked questions

How much does it cost to replace engine mounts on a Isuzu Rodeo Sport?
Parts alone start at $15.95 per mount on a Isuzu Rodeo Sport. Most vehicles require one to three mounts depending on which positions have failed. Shop labor typically adds one to three hours depending on mount location and accessibility. Replacing all worn mounts at the same visit reduces total labor cost compared to separate jobs.
How long do engine mounts last on a Isuzu Rodeo Sport?
Engine mounts on a Isuzu Rodeo Sport generally last somewhere between 60,000 and 100,000 miles, though hydraulic mounts and vehicles used for towing or performance driving often wear sooner. Heat cycles, oil contamination, and high-torque use all accelerate rubber degradation. Inspect mounts visually at every major service interval.
Can I drive my Isuzu Rodeo Sport with a broken engine mount?
You can drive short distances, but it is not advisable. A failed mount allows the engine to shift under load, which can pull on coolant hoses, stress the exhaust system, and damage CV axles or the transmission. On a Isuzu Rodeo Sport with a collapsed mount, vibration and secondary damage will worsen the longer driving continues.
Do I need to replace all engine mounts at once on a Isuzu Rodeo Sport?
Not always, but it is worth inspecting all positions while one is already being replaced. Mounts age together, and a single new mount paired with two worn ones will absorb disproportionate load and fail faster. If more than one mount shows cracking or collapse on your Isuzu Rodeo Sport, replacing the full set saves repeat labor costs.
How do I know which engine mount position has failed on my Isuzu Rodeo Sport?
With the engine off, have a helper shift between Drive and Reverse while you observe the engine from above with the hood open. Excessive rocking in a specific direction points to the mount on the side the engine lunges toward. A floor jack with a wood block placed carefully under the oil pan can also isolate a collapsed mount by revealing which position has no tension.
Will a new engine mount stop the vibration in my Isuzu Rodeo Sport?
In most cases, yes — if a worn or collapsed mount is the source. However, vibration on a Isuzu Rodeo Sport can also come from worn transmission mounts, unbalanced tires, or drivetrain issues. Confirm the mount is visibly damaged or that the engine moves excessively before replacing, so you are addressing the actual cause.

Shop engine mounts by year for the Isuzu Rodeo Sport

200320022001

More parts for your Isuzu Rodeo Sport

Wiper Blade SetEngine Oil PanPower Steering HoseThrottle Position SensorAccessory Drive Belt Tensioner AssemblyA/C Suction Line HoseVapor CanisterShock Absorber

Engine mounts for other Isuzu models

Isuzu i-350Isuzu i-370Isuzu I-MarkIsuzu HombreIsuzu i-280Isuzu Ascender