AutoBuffy
Call To Order

Loading...

Jeep Cherokee Fuel Injection Throttle Body Repair Kits

Jeep Cherokee Fuel injection throttle body repair kits

Starting at $87.95, a fuel injection throttle body repair kit gives you the gaskets, seals, o-rings, and often the throttle position sensor or idle air control components needed to restore a leaking or sticking throttle body on your Jeep Cherokee. With 1 kits in stock from Standard Ignition, this repair stops rough idle, poor throttle response, and vacuum leaks without replacing the entire throttle body assembly.

Signs your Jeep Cherokee needs a throttle body repair kit

  • Rough or unstable idle that hunts up and down at a stop
  • Check engine light with codes related to throttle position, idle control, or mass airflow
  • Hesitation or stumble when pressing the accelerator from a standstill
  • Poor fuel economy with no other obvious cause
  • Visible fuel or oil residue around the throttle body gasket or base flange
  • Sticking or sluggish throttle pedal feel, especially when cold

Which throttle body repair kit should you buy for your Jeep Cherokee?

The right kit depends on what has actually failed. Some kits cover only the base gasket and o-rings for a simple reseal, while others include the throttle position sensor (TPS) or idle air control (IAC) valve for a more complete rebuild. Match the kit to the specific symptom and the year range of your Jeep Cherokee before ordering.

Gasket & Seal Kit
Best for
Vacuum leaks, fuel smell, coolant seepage at throttle body base
What you get
Base gasket, coolant port o-rings, and throttle bore seal — no electrical components
Full Rebuild Kit
Best for
High-mileage throttle bodies with multiple failure points
What you get
Gaskets, o-rings, TPS sensor, IAC valve, and all hardware for a complete overhaul
TPS Replacement Kit
Best for
Erratic idle, surging, or hesitation confirmed to a faulty throttle position sensor
What you get
New TPS sensor plus mating gasket and mounting hardware
IAC Valve Kit
Best for
Rough cold idle, stalling at stops, or idle speed hunting with no vacuum leak present
What you get
Idle air control valve, mounting gasket, and o-ring for a direct swap

Fuel injection throttle body repair kits brands we stock for your Jeep Cherokee

Standard Ignition
1 option · from $87.95

Replacing a throttle body repair kit on a Jeep Cherokee

Moderate⏱ 1–2 hoursSocket set and ratchetFlat-blade and Phillips screwdriversThrottle body cleaner sprayTorque wrenchClean lint-free rags

Disconnect the battery and air intake duct, then carefully remove the throttle body from the intake manifold, noting coolant hose and electrical connector positions. Clean the bore and mating surfaces thoroughly before installing new gaskets, o-rings, and any included sensors, then reassemble and torque fasteners evenly to the manufacturer's specification range for your Jeep Cherokee. After installation, perform the required throttle or idle relearn procedure before returning the vehicle to normal driving.

Frequently asked questions

How much does it cost to replace throttle body repair kits on a Jeep Cherokee?
Parts start at $87.95 for a basic gasket and seal kit on a Jeep Cherokee. A full rebuild kit with TPS and IAC components costs more but can save you the price of a new throttle body assembly. DIY labor is typically 1–2 hours; shop labor adds $75–$150 depending on access and location.
Can I reuse my throttle body after installing a repair kit on my Jeep Cherokee?
Yes — that is the purpose of a repair kit. As long as the throttle body bore is not scored, cracked, or heavily corroded, replacing the seals, gaskets, and worn sensors restores proper function. Inspect the bore and butterfly plate carefully before reassembly; replace the entire unit only if physical damage is found.
Do I need to relearn the throttle body after a repair on a Jeep Cherokee?
Often yes. Many modern Jeep Cherokee models require an idle relearn or throttle position relearn procedure after the throttle body is disturbed. This can be done with a scan tool or by following a key-cycle idle procedure outlined in the service manual. Skipping this step can cause continued rough idle or stalling.
How long does a throttle body repair kit last on a Jeep Cherokee?
A quality repair kit with OEM-spec materials typically lasts several years under normal driving conditions. Longevity depends on coolant condition (coolant o-rings degrade faster with old, acidic coolant), heat cycles, and whether the root cause of the original failure was addressed. Replacing coolant at the recommended interval helps extend seal life.
Is a throttle body repair kit the same as a throttle body gasket?
Not always. A throttle body gasket is a single component sealing the throttle body to the intake manifold. A repair kit bundles that gasket with additional o-rings, coolant port seals, and sometimes the TPS or IAC valve. If multiple seals are aged or a sensor is faulty, a full kit is more cost-effective than buying each piece separately.
What causes a throttle body to need a repair kit on a Jeep Cherokee?
Heat cycling over time hardens and shrinks rubber o-rings and gaskets, causing vacuum and coolant leaks. The TPS and IAC valve wear out from constant electrical cycling and carbon buildup. High mileage, infrequent air filter changes (allowing dirty air to accelerate bore wear), and degraded coolant attacking port seals are the most common causes on a Jeep Cherokee.

Shop fuel injection throttle body repair kits by year for the Jeep Cherokee

19901989198819871986

More parts for your Jeep Cherokee

Brake PadHVAC Defrost and Heater Air Duct HoseHVAC Heater HoseTire Pressure Monitoring System (TPMS) Programmable SensorBrake Master CylinderSteering Damper KitEngine Coolant Temperature Sensor ConnectorLiftgate Lift Support

Fuel injection throttle body repair kits for other Jeep models

Jeep WranglerJeep ComancheJeep CJ3Jeep TruckJeep CJ7Jeep FC170