Loading...

Jeep Patriot Liftgate Lift Supports

Jeep Patriot Liftgate lift supports

Starting at low prices, AutoBuffy stocks multiple liftgate lift supports from top OE-quality brands. A liftgate lift support is a gas-charged strut that holds your Jeep Patriot's rear hatch or tailgate open hands-free. When it fails, the liftgate falls unexpectedly under its own weight, creating a safety hazard and making cargo loading a two-person job.

Signs your Jeep Patriot needs new liftgate lift supports

  • Liftgate falls down slowly or drops immediately after being raised
  • You have to prop the liftgate open with a stick or your arm to keep it up
  • Liftgate only stays up partway instead of rising to its full open position
  • Visible oil residue or wet streaking on the strut body, indicating a failed gas seal
  • Liftgate feels unusually heavy or requires excessive force to lift manually
  • Strut body is visibly bent, corroded, or the end mounting ball socket is cracked or loose

Which liftgate lift support should you buy for your Jeep Patriot?

The most important factors are correct extended and compressed length, gas pressure rating (measured in pounds of force), and end fitting style — all must match the original specs for your Jeep Patriot. Aftermarket options range from economy replacements to OE-equivalent units; on rear hatches with dual supports, both struts should always be replaced as a pair so lift force stays balanced.

Economy / Value
Best for
Budget-conscious repairs, older high-mileage Jeep Patriots
What you get
Meets minimum OE lift force specs; shorter expected service life; adequate for everyday use
OE-Equivalent (Premium Aftermarket)
Best for
Most Jeep Patriot owners wanting OEM performance
What you get
Matched gas pressure, end fittings, and travel length; longer service life; direct bolt-on fit
OEM Replacement (Dealer-Sourced)
Best for
Jeep Patriots under warranty or with strict fit requirements
What you get
Exact factory spec, guaranteed fitment; typically highest cost option
Sold as Pair
Best for
Any Jeep Patriot with two supports (most hatchbacks and SUVs)
What you get
Balanced lift force, prevents uneven stress on hinges; best value when both struts are worn

Replacing liftgate lift supports on a Jeep Patriot

Easy⏱ 15–30 minutesFlat-head screwdriver or trim pry tool (for clip-style end fittings)Safety prop or second person to hold liftgate openSafety glassesNeedle-nose pliers (if retaining clips are present)

Prop the liftgate securely open, then use a pry tool or your thumb to pop each strut end off its ball stud — start at the bottom mount and work upward. Snap the new struts onto the ball studs in reverse order, bottom first, until each end clicks firmly into place. No special tools or torque specs are required; the press-fit ball socket is the only fastener on most Jeep Patriot applications.

Frequently asked questions

How much does it cost to replace liftgate lift supports on a Jeep Patriot?
Parts for a Jeep Patriot start at low prices per strut at AutoBuffy. Most vehicles use two supports, so budget for a pair. Professional labor is typically under an hour and adds modest shop fees. Replacing them yourself is straightforward and cuts the total cost significantly.
Can I drive my Jeep Patriot with a broken liftgate lift support?
Yes, a failed lift support does not affect driveability. However, a liftgate that drops unexpectedly can cause head or hand injuries during loading and unloading. It can also stress hinge hardware over time. Replacement is low cost and low effort, so there is little reason to leave it unrepaired.
Do I need to replace both liftgate lift supports at the same time on my Jeep Patriot?
Yes. Lift supports wear at roughly the same rate because they share the same load cycles. Replacing only one leaves mismatched gas pressure, causing the liftgate to open unevenly and placing extra stress on hinges and the stronger strut. Replacing both at once also saves labor time on your Jeep Patriot.
How long do liftgate lift supports last on a Jeep Patriot?
Service life varies with climate, use frequency, and part quality, but most lift supports last somewhere between 50,000 and 100,000 miles or roughly five to ten years. Exposure to extreme cold, road salt, and frequent liftgate cycling shortens that range noticeably on a Jeep Patriot used in harsh conditions.
Are aftermarket liftgate lift supports as good as OEM on a Jeep Patriot?
Premium aftermarket lift supports from established brands like top OE-quality brands are engineered to match OE gas pressure, end fitting dimensions, and travel length. For most Jeep Patriot owners they perform on par with dealer parts at a lower price. Economy-grade units may have a shorter service life but still restore safe liftgate function.
How do I know which liftgate lift support fits my Jeep Patriot?
The critical specs are extended length, compressed length, gas force rating in pounds, and end fitting type — typically a ball socket or pin. Use AutoBuffy's year-make-model lookup to filter multiple available options down to confirmed fits for your Jeep Patriot. Never rely on visual similarity alone, as dimensions vary across trim levels.

More parts for your Jeep Patriot

Radio CapacitorVapor Canister FilterFog Light AssemblyHVAC Blower MotorRadiatorSuspension Strut Mount BracketStrut Mount KitCV Joint Boot

Liftgate lift supports for other Jeep models

Jeep CherokeeJeep Grand WagoneerJeep LibertyJeep WagoneerJeep CommanderJeep Compass