Loading...

Jeep Wrangler Fog Light Assemblys

Jeep Wrangler Fog light assemblys

Fog light assemblies for the Jeep Wrangler start at $22.95, with 23 options in stock from TYC, Dorman, and Valeo. A fog light assembly includes the housing, lens, and mounting hardware that aims a wide, low beam to cut through fog, rain, and snow. When the lens cracks, housing floods with moisture, or the assembly breaks, light output drops and the beam scatters, reducing visibility precisely when conditions are most dangerous.

Signs your Jeep Wrangler needs a new fog light assembly

  • Foggy or moisture-filled lens interior that does not clear after driving — water has breached the housing seal
  • Visible cracks, chips, or yellowing on the lens face that scatter the beam pattern across the road instead of keeping it flat and wide
  • Fog light flickers or cuts out intermittently even after replacing the bulb, pointing to a corroded or broken socket inside the assembly
  • Assembly housing is cracked, broken, or has separated from its mounting tabs after a minor impact or road debris strike
  • Beam aims noticeably high, low, or sideways and cannot be corrected by the adjuster screw, indicating a broken pivot or housing warp
  • Rust or burn marks around the bulb socket inside the housing, signaling heat damage or an electrical fault that makes the assembly unsafe to continue using

Which fog light assembly should you buy for your Jeep Wrangler?

The main decision is whether to match the original equipment style and beam pattern or upgrade to a brighter light source. You also need to choose between driver-side, passenger-side, or a pair, and decide how much lens clarity and housing durability matter for your driving conditions. Getting the correct side and exact fitment is critical — fog light assemblies are not interchangeable between left and right.

OE-Replacement (Halogen)
Best for
Owners who want a straightforward, like-for-like restore
What you get
Matched beam pattern, direct plug-and-play wiring, standard halogen bulb included or compatible — lowest upfront cost
OE-Style with Clear Lens Upgrade
Best for
Owners replacing a yellowed or hazy original lens
What you get
Same housing shape and fitment as stock but with a cleaner polycarbonate lens that resists UV yellowing longer than the factory unit
LED Fog Light Assembly
Best for
Drivers who frequently use fog lights in heavy weather and want improved brightness and longevity
What you get
Integrated LED array, whiter color temperature, lower current draw, no bulb to replace — confirm your Jeep Wrangler wiring supports direct-fit LED before ordering
Projector-Style Assembly
Best for
Owners who want a sharper, more controlled beam cutoff to reduce glare for oncoming traffic
What you get
Projector lens inside the housing focuses the beam more precisely than a standard reflector assembly, available in halogen or LED versions

Fog light assemblys brands we stock for your Jeep Wrangler

TYC
20 options · from $22.95
Dorman
2 options · from $72.95
Valeo
1 option · from $264.95

Replacing fog light assemblies on a Jeep Wrangler

Easy⏱ 30–60 minutes per sideFlathead and Phillips screwdriversPlastic trim removal tool or pry barSocket and ratchet setWork gloves

On most Jeep Wrangler configurations, the fog light assembly is reached by removing a section of the lower bumper fascia, a wheel well liner tab, or a dedicated access panel — no bumper removal required. Disconnect the wiring harness, remove the retaining screws or clips holding the assembly in place, and seat the new unit until it clicks into its mounting points before reconnecting the plug. Aim adjustment can be made with the adjuster screw using a reference mark on a flat wall before driving.

Frequently asked questions

How much does it cost to replace fog light assemblies on a Jeep Wrangler?
Parts start at $22.95 for a single fog light assembly for the Jeep Wrangler. A complete pair typically runs higher depending on brand and style. Professional installation adds a labor charge, usually under an hour of shop time per side. DIY replacement is straightforward on most trims, keeping total cost close to the part price alone.
Can I replace just one fog light assembly on my Jeep Wrangler, or do I need to replace both?
You can replace a single side if only one is damaged. However, if both assemblies are the same age and one has a cracked or yellowed lens, the other is likely close behind. Replacing as a pair keeps beam output and color balanced, which matters more with LED upgrades than with halogen replacements.
Are fog light assemblies on the Jeep Wrangler hard to replace yourself?
Most fog light assemblies on the Jeep Wrangler are accessible from under the front bumper or through a wheel well liner, making the job manageable for a DIYer with basic tools. The typical process takes under an hour per side. No special equipment is required, and the wiring connector is usually a simple plug-and-release tab.
Will an LED fog light assembly work with my Jeep Wrangler's stock wiring?
Many direct-fit LED fog light assemblies are designed to plug into the factory harness without modification. However, some Jeep Wrangler models use a load-sensing circuit that may cause a hyperflash warning or error code when a lower-draw LED replaces a halogen unit. Check the product fitment notes and confirm compatibility for your specific trim before ordering.
What causes a fog light assembly to fill with condensation on a Jeep Wrangler?
Small cracks in the lens, a deteriorated housing seal, or a damaged vent port allow moist air inside. Once the seal fails, normal temperature cycling pulls humidity into the housing where it condenses on the lens. A quick fog that clears is normal; persistent standing moisture or water droplets mean the assembly seal is compromised and replacement is the reliable fix.
Do fog light assemblies for the Jeep Wrangler come with bulbs included?
It depends on the assembly. OE-replacement and upgrade assemblies sometimes include a bulb, while others supply only the housing and lens. LED assemblies have the light source integrated and need no separate bulb. Always check the product listing — if no bulb is listed as included, order the correct replacement bulb for your Jeep Wrangler at the same time.

Shop fog light assemblys by year for the Jeep Wrangler

20252024202320222021202020192018201720162015201420132012201120102009200820072006200520042003200220012000199919981997199519941993199219911990198919881987

More parts for your Jeep Wrangler

Multi-Purpose Electrical ConnectorHVAC Blower Motor ResistorNeutral Safety Switch ConnectorBrake Master CylinderHeadlight Dimmer Switch ConnectorIdle Speed Control MotorDirect Ignition Coil Boot KitFuel Injection Throttle Body Repair Kit

Fog light assemblys for other Jeep models

Jeep PatriotJeep CompassJeep Grand CherokeeJeep GladiatorJeep RenegadeJeep Commander