Loading...
Starting at $2.95, AutoBuffy stocks 23 spark plugs from Denso, NGK, and Champion to fit the Land Rover Defender 110. Spark plugs ignite the air-fuel mixture in each cylinder; when they wear out, combustion becomes incomplete, robbing the engine of power, hurting fuel economy, and in severe cases causing misfires that can damage the catalytic converter.
The right plug depends on the electrode material the Land Rover Defender 110's engine was designed for and how long you want to go between changes. Upgrading to a longer-life material is usually straightforward, but you should never step down to a shorter-life plug than the factory spec calls for. Always match the heat range and thread size exactly — an incorrect heat range can cause pre-ignition or fouling.
| Option | Best for | What you get |
|---|---|---|
| Copper core | Older engines or budget-conscious replacement on high-wear schedules | Lowest cost, excellent conductivity, shortest service life — requires the most frequent changes |
| Platinum (single) | Most modern engines with distributor or standard coil-on-plug ignition | Longer service life than copper, harder electrode resists wear, mid-range price point |
| Double platinum (dual) | Waste-spark ignition systems where the plug fires from both ends | Platinum on both center and ground electrode prevents rapid wear unique to waste-spark firing |
| Iridium | High-performance engines, turbo applications, or maximum interval between changes | Hardest electrode material, finest tip for consistent spark, longest service life of any common type |
Let the engine cool completely before starting — a hot aluminum head can have threads damaged by removal under heat. Blow out each plug well before removal to keep debris out of the cylinder, then install new plugs finger-tight before snugging them down with a torque wrench to the specification in your Land Rover Defender 110 service manual. Reconnect the ignition coil or boot until it clicks, then start the engine and confirm no misfire codes are present.